EZPZ Pegboard Hook // 25mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 20mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook Type B

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a shallow angle. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 15mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Peg Anything // Removable Containers

container-5x3x1-5.stl

EZPZ Pegboard Hook // 20mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 20mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 25mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 25mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 5mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 5mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

EZPZ Pegboard Hook // 10mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Small Hook // Peg Anything

A little hook I made to hang my rulers, but it'll work great for lots of things. Very quick print. Print solid. Give it a try and share how you used it!

Made for standard pegboards with 1/4" holes.

Pen Rack // Peg Anything

This handy rack will hold 20 narrow objects like pens, pencils, tools, etc. Print solid (at least the peg part). No supports required.

Designed for a standard pegboard with 1/4" holes spaced 1" apart

Packing Tape Dispenser Holder // Peg Anything

packtapeholder-stronger.stl

Magnetic Tack // Peg Anything

peg-magnet-6x3mm.stl

Tube Holder (2 sizes) // Peg Anything

peg-tube.stl

Isopropyl Alcohol Quart Holder // Peg Anything

Gotta have that iso nearby for cleaning the printer bed! This simple pegboard mount has three pegs that clip into a standard pegboard (1" grid 1/4" holes).

Fits a generic quart size isopropyl container (up to 82mm x 82mm)

No supports required, but there is quite the bridge, so you may want some light supports anyways depending on your printers bridging abilities.

Flush Cutter, Pliers, Clippers Holder // Peg Anything

If you own a 3D printer, you probably have a pair of these blue clippers lying around. Instead of searching around for them all the time, how about hanging them up on a pegboard so you'll always know where they are!

Super quick print. No supports required. Print solid.

Frame Hanger // Peg Anything

I made this little frame hanger to hang up my YouTube play button, but it should work for just about any frame with a hangar or hole on the back. It'll also work to hang anything by a wire or string.

Made for a standard pegboard with 1/4" holes spaced 1" apart

Peg Anything // Battery Holder for GH6, GH5, Sony, DMW-BLF19E, NP-F550, RP-BC009, NP-F330 F550 F570

Keep your camera/lighting batteries organized with these custom pegboard mounts for compatible Panasonic and Sony batteries.

Compatible Battery Models:

Panasonic Dmw-BLF19 and Panasonic Lumix DC-S5, DC-S5 II, DC-S5 IIX, GH5 II, GH6, S5II, S5IIX, S5M2, S5M2X, GH5M2

Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917

peg anything

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Pegboard Hook // 25mm Reinforced Hook

EZPZ Pegboard Hook // 20mm Hook Type B

EZPZ Pegboard Hook // 10mm Hook Type B

EZPZ Pegboard Hook // 15mm Hook

Peg Anything // Removable Containers

EZPZ Pegboard Hook // 20mm Hook

EZPZ Pegboard Hook // 25mm Hook

EZPZ Pegboard Hook // 5mm Hook

EZPZ Pegboard Hook // 10mm Hook

EZPZ Pegboard Hook // 10mm Reinforced Hook

Small Hook // Peg Anything

Pen Rack // Peg Anything

Packing Tape Dispenser Holder // Peg Anything

Magnetic Tack // Peg Anything

Tube Holder (2 sizes) // Peg Anything

Isopropyl Alcohol Quart Holder // Peg Anything

Flush Cutter, Pliers, Clippers Holder // Peg Anything

Frame Hanger // Peg Anything

Peg Anything // Battery Holder for GH6, GH5, Sony, DMW-BLF19E, NP-F550, RP-BC009, NP-F330 F550 F570

Gridfinity 1x4 Baseplate for Pegboard // Peg Anything