Groom Goose Gear for Porch Goose

PorchGooseGroom3mf_FunFam3D.3mf

Steampunk Pipe Panels

Pipe Panel 2 with Gauges and Handles.stl

Keychain Witch Hat Snappy Cat  - (Snap-Flex: Medium Tightness Joint)

WHSC_Keychain_Medium_Both.stl

Biohazard Duck

biohazard_duck_angrymonday.stl

Citrus, portable cable winder.

Case.stl

Duo Planter Type 4

Duo Planter Type 4 Base.STEP

16oz.Wizard Can Cozy Dice Tower

Ornate design  Wizard 16oz. done.stl

Banjo Kazooie

Banjo_Kazooie_.stl

Moderate Weight-Bearing Snap - Twist-On Multipoint Mount

Moderate Weight-Bearing Snap - Twist-On Multipoint Mount.stl

Gridfinity 1x1 pencil holder

pen_pencil_holder.stl

ORIGAMI  STILT |  Table Lamp E14, E26, E27 print-in-place

ORIGAMI-STILT_floor-lamp_Base_Large_high_E14.stl

Wall lamp “Robur tree”

Body.stl

Hufflepuff House Shield

Hufflepuff.stl

1x1 LU - Tray

1x1 - Horizontal Bin Tray.stl

ezio-auditore-REMIX.3mf

remix of https://www.thingiverse.com/thing:4098773

- I cleaned up and solidified the base.
- Significantly reduced the polygon count as it was way too high.
- corrected bad meshes.
- increased height to 250 mm (you can print smaller if you want. 

NOTE: I recommend this only for personal use based on my understanding of how the original was acquired. 



Free Plague Guard

PlagueSoldier_Free.stl

Ice Cream Cone Clicker Keychain Fidget Toy Bundle

ICE CREAM - KEYCAP - CAT SCOOP (BLANK EYES) - KEYCHAIN.stl

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

This is both a decorative and functional sunflower themed hand fan that I designed for the #pdo #summer 3D modeling challenge.
Indiana summers can get quite hot, so having a collapsible fan in your bag can be a life-saver!

While I was brainstorming what to model for the challenge, I tried to come up with ideas that I thought would be fun to model, easy to 3D print, and usefully functional on a daily basis. I came  up with a few different concepts, some of which were quite elaborate, however I only had one day left until the challenge was over. With this in mind, I narrowed down the list until I settled on a collapsing hand fan. Even with the limited timeframe, I still wanted to push myself and create a hand fan design that was collapsible but was also made with only 3D printed parts. Additionally, as with most of my designs, I wanted all of the parts to be 3D printable without any support material.

I got started on the initial design and as the basic structure of it was coming together, I began thinking about what artistic flair I wanted to add. A number of different summer-y themes came to mind, but as I looked at the form and shape that I had so far, it really looked like a flower to me. I remembered how much my wife loves sunflowers, so I thought that would be the perfect artistic design to incorporate into the model.

This model is designed to be printed as separate parts, and then assembled. 
The parts that you will need to print to create the full assembly are:
- Cap (x1)
- Top Petal (x1)
- Middle Petal (x6)
- Bottom Petal (x1)

Each of the parts for dual extrusion are prefixed “Dual” and also indicate whether or not it is the base part or the overlay for the part.
Each of the parts for single extrusion are prefixed “single” and already have the base and overlay combined together into a single part.
The cap is the same for both the dual and single versions.

All of the components are designed to be able to be printed using a dual extruder 3D printer so that two different colors can be used. For the Dual version each petal is split into two bodies; the base of the petal and the artistic overlay that accompanies it. For the Single versions, each model can be printed with a single extruder with a single color, or with a single extruder and a paused color change at the 2mm layer height to still achieve a two-color effect.

The model is assembled by first pressing each of the six (6) Middle Petals onto the post that is part of the Bottom Petal. Next, the Top Petal can be pressed onto the same post. Lastly, fit the cap onto the top of the post such that the nub inside the cap fits into the notch in the post. Press the cap as far down as it will go and then rotate the cap until it snaps past the locking mechanism. Once the cap is locked onto the post, the slots and pegs on the front and back of each petal will keep the fan from extending too far or opening the wrong direction.

You can take a look at the renders in the “Community Uploads” section to see what the assembly looks like in it’s opened and closed positions.

p

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Groom Goose Gear for Porch Goose

Steampunk Pipe Panels

Keychain Witch Hat Snappy Cat - (Snap-Flex: Medium Tightness Joint)

Biohazard Duck

Citrus, portable cable winder.

Duo Planter Type 4

16oz.Wizard Can Cozy Dice Tower

Banjo Kazooie

Moderate Weight-Bearing Snap - Twist-On Multipoint Mount

Gridfinity 1x1 pencil holder

ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place

Wall lamp “Robur tree”

Hufflepuff House Shield

1x1 LU - Tray

ezio-auditore-REMIX.3mf

Free Plague Guard

Ice Cream Cone Clicker Keychain Fidget Toy Bundle

Sunflower Hand Fan (STL Format) | #pdo #summer | NoahMillerDesign

Swimbait Fishing Lure #OutdoorThangs

12x12 MU - Bottom Left Grid Interfitted - MultiBoard Octagon Plate