Gridfinity - Wires and Boards holder

This is designed to vertically store a small box of jumper wires and some protoboards. 

This item is for use with the #GridFinity system by Zach Freedman:

https://www.youtube.com/watch?v=ra_9zU-mnl8

Amazon Echo Dot 4th Gen Under Cabinet Mount

Echo Dot 4th Gen Mount .stl

Raspberry Pi + Osoyoo 5 DSI screen case - Klipper screen

rpi+osoyoo - assembled.stl

5x7 Picture Frame Template.stl

5x7 Picture Frame Template for Thangs official Remix Challenge.

Prints in place (single piece), with nail holes on the back.

Lock and Key.stl

For the remix contest. 
To me giving a real lock means something very special. so give it to your boy/girl or just hand them out to all the boys/girls at the club and see who likes geeks and 3d printing. Worst they can do is say no. Good luck in love, you lovers everywhere! 

PQWCV02_v1 v4.stl

Pour le papier toilette et pour déposer des lingettes ou un smartphone

Butter case

butter_case-Base.stl

Beacon of Doom - Crystal Commander Tank

Magic infusing tank with cockpit for mini

Beacon of Doom - TBD Army (2).stl

War Memorial Arena

3 Baby Grogus Heart

groguheartremix.stl

Remix of Simple Heart Box with Hinge

heart box right side.stl

Mitutoyo Holder remix

This is a remix of Zach Freedman's excellent Gridfinity Mitutoyo caliper holder. I didn't have the need for spare batteries, but I *did* need a place to stick a steel ruler and a fillet gauge (https://www.thingiverse.com/thing:1184315)

Original: https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Caliper%20Holder-62216

I've included the Fusion 360 source so you can adjust. Note that some filaments expand (especially the one pictured), so you may want to expand the clearances. Or just sand the inside a bit with a rasp as I did. Normal PLA prints perfectly fine as is.

Thangs Valentine’s Day Contest - Remix - Two Wolves Love Locks

Two Wolves Love Lock Combined v1.stl

Headband Adjuster

I've got a handful of headlamps that work great, but the elastic has worn out on the headband. New bands are generally north of $10, which is on par with a (cheap) new whole headlamp! Such inefficiency!

Instead, buy a roll of 1" elastic for about $10, then print as many of these hooks as you need, two per strap.

Cut a ~24 inch section of band (mine at 28 was longer than needed).

Fill the cups in the side of each clip with a bit of superglue, and slightly dampen the ends of the elastic before inserting them fully into the cups. 

Give the glue a minute to set, and you've got a new headband!

Optical Endstop Mount

Hi there - i made this Optical Endstop Mount, i could not find anything that matched :)
I am using the endstops on my sculpfun s9 Laser

Bannana Vertical Wall Mount

Mount you're banana connectors vertically and convently

FHW: Nerf Rotating Target v1.7 SKOL

ZIP22 AOD v4.stl

Tired of putting your finger directly next to the barrel of your Zip.22 when clearing jams? Annoyed with the small surface area you have to depress the charging rod? 

Let me Introduce you to what I call the "Anti-Oopsie Device". The AOD presses over the Zip-Load rod and gives you ample room to pull the bolt back AWAY from the barrel to help minimalize the "oopsie" aspect of the ZIP. 
TO PRINT: print with the ridge side down and use brim bed adhesion.
TO INSTALL: Heat up the AOD with a hair dryer or heat gun, add a drop or two of super glue and press the Zip-Load rod into place. 
Note: WILL NOT WORK ON THE ZIP-Restrike ROD. IF NO GLUE IS USED, AOD GETS LAUNCHED ABOUT 5 FEET AWAY. ITS FUNNY BUT I DONT RECCOMEND.

Gridfinity Contact Case Holder.stl

Gridfinity holder for your contact cases!

Resin Print Ready Gridfinity 2x3 parts bin

This parts bin has holes placed in such a way as to minimize suction

output device

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity - Wires and Boards holder

Amazon Echo Dot 4th Gen Under Cabinet Mount

Raspberry Pi + Osoyoo 5 DSI screen case - Klipper screen

5x7 Picture Frame Template.stl

Lock and Key.stl

PQWCV02_v1 v4.stl

Butter case

Beacon of Doom - Crystal Commander Tank

War Memorial Arena

View 11 new models

Remix of Simple Heart Box with Hinge

Mitutoyo Holder remix

Thangs Valentine’s Day Contest - Remix - Two Wolves Love Locks

Headband Adjuster

Optical Endstop Mount

Bannana Vertical Wall Mount

FHW: Nerf Rotating Target v1.7 SKOL

ZIP22 AOD v4.stl

Gridfinity Contact Case Holder.stl

Resin Print Ready Gridfinity 2x3 parts bin