Cheeky Frog Middle Finger / Peace With Santa Hat / 3MF Included

Frog Middle Finger With Santa Hat.stl

Beautiful Abstract Ornament

Ashleigh3D - Abstract.stl

ARTICULATED, GINGERBREAD MAN, PRINT IN PLACE, POSABLE CHRISTMAS, "SCARED"

SCARED GINGER 23.stl

Icicle Ornaments 3

Double-Twist Lattice Icicle.stl

Penguin Birthday Bonus Ornament

Penguin_Ornament_BONUS Birthday_SparkyFace5.stl

Spooky Reindeer Ornament

Spooky Reindeer Ornament ..stl

Frosty Gnome Ornament

ornament_frosty_gnome.stl

Mini Christmas Ball - Medium Lattice

Mini Christmas Ball Medium Lattice.stl

Dog Bone Snowflake Ornament

Another new ornament, this time for the dog lovers. Snowflake shape with a bog bone and paw inside. I like it in bronze, would probably look good in white, gold, or silver as well. 

CHRISTMAS DOOR CORNER DECORATION

CCR (15).stl

HOME SIGN

TIMUX_HOME_SIGN.stl

MrsHerb- Nomz

MrsHerb Parts 3mf - Nomz.3mf

Swoop 3 Christmas Finial 2024

Finial Swoop 3 Whole v2.stl

Double Diamond Christmas Ball

###About the Design
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

###Not To Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

###Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

###Print Time
About 4.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I decreased the print temp from my usual 200 to 190 for this, decreased the flow from 115 to 105, and increased the outer wall speed from 20 to 30 mm/sec. That was enough to go from stem that was molten goo to one that printed perfectly.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
This does not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 30 mm/sec
* Inner Wall: 30 mm/sec
* Top/Bottom Speed: 30 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. 

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 49 Degrees

I added a support blocker 75 mm x 75 mm x 110 mm set 15 mm above the build plate so that the supports would only be added to the bottom of the ornament.

ornament

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cheeky Frog Middle Finger / Peace With Santa Hat / 3MF Included

Beautiful Abstract Ornament

ARTICULATED, GINGERBREAD MAN, PRINT IN PLACE, POSABLE CHRISTMAS, "SCARED"

Icicle Ornaments 3

Penguin Birthday Bonus Ornament

Spooky Reindeer Ornament

Frosty Gnome Ornament

Mini Christmas Ball - Medium Lattice

Dog Bone Snowflake Ornament

CHRISTMAS DOOR CORNER DECORATION

HOME SIGN

MrsHerb- Nomz

Swoop 3 Christmas Finial 2024

Double Diamond Christmas Ball

Patchwork Heart Bear

XL Rudolph

Gingerbread Cookie Ornaments Set 2

Animal Ball Ornaments

X-Mass Tetra shaped Christmass Tree Ornament

Cheeky Frog Middle Finger / Peace Missile-Toad / 3MF Included