Mera's Crown - Aquaman

mera crown.stl

Glowing Solar System // 8 Planets + Moon Glow Filament Decals

Jupiter_Glow.stl

Planet Line Art - Desktop Line Art

oalpo.stl

Elegoo Neptune 3 Pro/Plus/Max heated bed wire holder (Remix)

elegoo_wire_holder.stl

Trident of Poseidon- Aquaman

Poseidon-trident-complete.stl

PTFE Tube Holder for External Dry Boxes - Elegoo Neptune 3 Pro

PTFE Tube Holder - Body.stl

Elegoo Neptune 4 Tensioner Knob

Elegoo N4 Tensioner Knob v3.stl

Planet Lamps

Earth.stl

Neptune 3 Plus Faceplate / Frontend

NeptuneFacelate - Center  v4.3mf

BigTreeTech Octopus v1.1 Mount for Neptune 3 Plus

octopusmount v6.3mf

Neptune Plus Chain Bed and Link System

HeatbedChain - Links v1.3mf

Clip On Neptune Tool Holder

toolholder.3mf

Neptune TBStron3D Linear Rail Chain Adapter and Run Out Sensor Relocation

RailMount v7.3mf

Neptune Touchscreen and pi4 Case 

Neptune Touchscreen Case - Body v1.stl

solar system wall art space wall decor

solar system.stl

Solar System Display

Solar System Display.stl

Neptune Lithopanes

Hey,
these are Comet Vesta Lithopanes for you to remix.
There are different sizes 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 225, mm and 250 mm on there.
It's designed for an FDM printer with a 0.4 mm nozzle. You may be able to print this with bigger nozzles, if you use the layer height and width I recommend.
Print settings:
Domes are quite hard to print. I never printed this as a whole, I always cut it into pieces first.
Layer Height 0.2 mm
Layer Width 0.4 mm
No supports.
I always decrease the speed at the top of the dome (when the bridging occurs) to 50%. You can do this in Cura using the extension post-processing.
I use standard white PLA for these. If you are unsure if your filament works, just shine through the walls of the print with your phone lamp at something like 10% print completion. You should see the Lithophane effect.

Remember to add me when you remix this, I'm eager to see what you do with this. I made some ready to print lamps with this, you can check them out at my site.

If you used this, please consider buying me a coffee at https://www.buymeacoffee.com/Ri0m0

HMG7 Longer LK5 Pro Gantry Adapter.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Elegoo Neptune 2 runout extension

I bought an upgraded extruder and the filament entered from a higher position.  I made this to house the runout sensor and match the height while being able to reuse the m3 screws that come stock for it.

runout sensor enclosure

Neptune 3 Pro/Plus/Max Z Axis Camera Mount

I was looking for a way to get my Raspberry Pi camera connected to the Z Axis to my Neptune 3 Plus. I have been working for a while to get this looking just right. I think that I stuck gold and am I am finally ready to share it to the world. I hope that others find some use in this as well!

I used (2) M4x12 screws and nuts to attach it to the frame. It is not impeding any movement in any direction.

neptune

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 525 new models

Glowing Solar System // 8 Planets + Moon Glow Filament Decals

View 62 new models

Elegoo Neptune 3 Pro/Plus/Max heated bed wire holder (Remix)

View 62 new models

PTFE Tube Holder for External Dry Boxes - Elegoo Neptune 3 Pro

Elegoo Neptune 4 Tensioner Knob

View 16 new models

Neptune 3 Plus Faceplate / Frontend

BigTreeTech Octopus v1.1 Mount for Neptune 3 Plus

Neptune Plus Chain Bed and Link System

Clip On Neptune Tool Holder

Neptune TBStron3D Linear Rail Chain Adapter and Run Out Sensor Relocation

Neptune Touchscreen and pi4 Case

View 41 new models

Solar System Display

View 15 new models

View 510 new models

Elegoo Neptune 2 runout extension

Neptune 3 Pro/Plus/Max Z Axis Camera Mount