EZPZ Wall Hook  // Type A 36mm

TypeA_36mm.stl

EZPZ Wall Hooks Collection // 17 Variations (and counting!)

TypeB_20mmHook.stl

Hoto Screwdriver mount for Ikea skadis

vrtacka.stl

Tamiya Blackfoot & Mudblaster Rear Body Mount Brace, Stock & Double Wishbone

058013-11_1-1_mount_base.STL

Option 1 - For Stock Trailing Arm Rear End

Option 2 - For AMPro Double Wishbone Reear

Vertical Dual Snaps (DS Part A) - Large Command Strip Mount

Vertical Dual Snaps (DS Part A) - Large Command Strip Mount v1.stl

Single Snap (DS Part A) - Large Command Strip Mounts

Top - Single Snap (DS Part A) - Large Command Strip Mount.stl

Horizontal Dual Snaps (DS Part A) - Large Command Strip Mounts

Top - Horizontal Dual Snaps (DS Part A) - Large Command Strip Mount.stl

Ogre Fort - Armoured Mount - PRESUPPORTED - 32mm scale 

Ogre - Full - no top.stl

Roc - 3 Giant Eagles - PRESUPPORTED - 32mm scale 

giant-eagle-pose-1-attacking.stl

HMG7.3 Sapphire Pro-Plus Extruder Plate.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: MediaMan3D@gmail.com

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

2001 land rover discovery 2 head light adjuster mount 

i made this to replace the head light adjuster mounts for the headlight for the adjusting screw to go through 

printed on Ender 3 using PLA+ 
temp at 215
bed temp at 50 
speed at 70
support is tree 

Raspberry Pi Zero Mount - VHB Tape or M3 Screws - Pi Zero 2W

Pi_Zero_Mount_VHB_V1.step

mounts

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EZPZ Wall Hook // Type A 36mm

EZPZ Wall Hooks Collection // 17 Variations (and counting!)

Hoto Screwdriver mount for Ikea skadis

Tamiya Blackfoot & Mudblaster Rear Body Mount Brace, Stock & Double Wishbone

Vertical Dual Snaps (DS Part A) - Large Command Strip Mount

Single Snap (DS Part A) - Large Command Strip Mounts

Horizontal Dual Snaps (DS Part A) - Large Command Strip Mounts

View 22 new models

View 36 new models

View 510 new models

2001 land rover discovery 2 head light adjuster mount

Raspberry Pi Zero Mount - VHB Tape or M3 Screws - Pi Zero 2W