Twist-Lock Christmas Tree with Storage [Modular]

Baum+v17(1).3mf

Multi-Function Tester -TC1 Insert for Corrugated Gridfinity Light Bin 2x3x6

Bl_In_Re_Lid_2x3x3.step

Blank Insert Reinforced Lids

Bl_In_Re_Lid_3x4x3.step

Blank Insert Lids

Blank Insert Lid_5x7.step

Gridfinity Resistor Bins E12

68_82Ohm.3mf

Stackable Storage Container Organizer Boxes in 4 Sizes

Stackable_Storage_Boxes_L_Stackable.STL

Corrugated Gridfinity Light Bins (No vase mode)

Co_Lt_Bin_3x4x6.step

 SnapFit Box - Print in place storage solution

SNAPFIT BOX.stl

Lego Themed Storage Trays

4x4 front Brick.stl

Giftfinity Bins

Giftfinity Base Small.stl

Gridfinity bin in vase mode.stl

Modified to print using vase mode.
Uses about 50% of filament than in "normal" mode and takes less time to print.

Derived from [Zack Freedman's](https://thangs.com/designer/ZackFreedman) parametric #Gridfinity modular workshop storage system

Find more Gridfinity accessories at [https://bit.ly/3E2NxnZ](https://bit.ly/3E2NxnZ)

Celtic Knot Gridfinity Bin 2x2 Extended

This model is part of a series of “Celtic knot” bins compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . The series includes pairs of 1x1, 1x2 and 2x2 bins, each pair includes a “standard” and “extended” height option.
The inside heights of the “standard” and “extended” bins are approximately 48mm and 76mm respectively.

See here for video: https://youtu.be/5_mQjSdr3ss 

Links to full set:
Celtic Knot Gridfinity Bin 1x1 Standard: https://social.thangs.com/m/733950 
Celtic Knot Gridfinity Bin 1x1 Extended: https://social.thangs.com/m/733951 
Celtic Knot Gridfinity Bin 1x2 Standard: https://social.thangs.com/m/733953 
Celtic Knot Gridfinity Bin 1x2 Extended: https://social.thangs.com/m/733956 
Celtic Knot Gridfinity Bin 2x2 Standard: https://social.thangs.com/m/733962 
Celtic Knot Gridfinity Bin 2x2 Extended:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for links to similar “Chain Link Gridfinity Bin” series: https://social.thangs.com/m/714038


Chain Link Gridfinity Bin 2x2 (80mm)

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 20mm, 40mm, 60mm and 80mm

See here for video: https://youtu.be/ia-tEUhWVfw 

See here for 3D files:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mm (1/4”) magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for single unit bins:
Chain Link Gridfinity Bin Single 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin Single 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin Single 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin Single 100mm: https://social.thangs.com/m/664302


Chain Link Gridfinity Bin 1x2 100mm

This 1x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/Vc2qg9umKLM 

See here for other 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm:

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

See here for single unit bins:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 80mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 60mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 40mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm:
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


Snap Boxes (Valentine’s Edition)

Display Only do not print.stl

Gridfinity Divider Bins

Divider Box 2x1x6 5-Compartment.stl

modular storage

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Twist-Lock Christmas Tree with Storage [Modular]

Multi-Function Tester -TC1 Insert for Corrugated Gridfinity Light Bin 2x3x6

Blank Insert Reinforced Lids

Blank Insert Lids

Gridfinity Resistor Bins E12

View 27 new models

Corrugated Gridfinity Light Bins (No vase mode)

SnapFit Box - Print in place storage solution

Lego Themed Storage Trays

Giftfinity Bins

Gridfinity bin in vase mode.stl

Celtic Knot Gridfinity Bin 2x2 Extended

View 10 new models

Chain Link Gridfinity Bin 1x2 100mm

Chain Link Gridfinity Bin 100mm

Chain Link Gridfinity Bin 80mm

Chain Link Gridfinity Bin 60mm

Chain Link Gridfinity Bin 40mm

Snap Boxes (Valentine’s Edition)

View 10 new models