GPU Support Star Spiral

72 mm round spiral GPU Support.stl

G305 BXH logitech g305 shell mod 61g

G305 BXH whole.stl

GPU Support Triangle Pattern

72 mm Round Triangle GPU support.stl

Lightweight Mouse Shell Steelseries Sensei 310 

base.stl

Muzzle mod for a toy USP pistol

Toy USP muzzle mod.stl

Ender3S1 - Spool_Holder.stl

Alpakka Dimpled Thumbstick Variant

Recessed Dimple Short Stick Thick Base

Thumb Cap Compatible Alpakka Analogue Stick Mod

Tall Length Thick Base.3mf

rta stand.3mf

simple stand for an rta, rda, rdta or atomizer with a juice gutter for those leaky ones

FHW Mod Sec Sci Fi short end with gem

hello tribe
an addition to the mode sec toy line, I have made a few geodes sticking out of the the Mod Sec Terrain walls
PLease enjoy

FHW Mod Sec Sci Fi Tall interlok gems

FHW Mod Sec Sci Fi Tall interlok gems.stl

Ender 3 V3 SE Sharpie Marker Color Blender

blender-3color.stl

Anycubic Mega S (Pro) X Carriage Sherpa Mini Carrier Plate V5 (Stock) Hotend


This started off as a basic project from the Video JJ Shankles did, that was until I found out the original Sherpa Mini Carrier Plates were for V6 or Volcano Linked https://www.printables.com/model/206014-anycubic-mega-s-mk4-x-carriage-mount-for-sherpa-mi & 
https://www.printables.com/model/473644-anycubic-i3-mega-s-sherpa-mini-volcano-extruder-mo , thus this Tinkercad Monstrosity was made.
It works well, has enough clearance and seems to be rigid enough to have no issues, I’ve only run it for 20 hours or so in testing but am loving my Triangle Labs Sherpa Mini and on this plate it works well. Images showing the voltages from the video for reference voltage to get good results.
Images of a quick wiring splice to allow for future mods which is just a JST 2.54mm XH-4A installed in place of stock extruder cable. In my case I left 40mm of stock cable on stock extruder to easily use in another future project.
X Carriage Base Mod - 	https://www.thingiverse.com/thing:3537449 
Config is on my GIT https://github.com/Tactical-Koala/AnycubicMegaProKlipper
Video discussing steps and some small issue may be coming in future, I’ll update here if I get to it.
BOM
Sherpa Mini Kit – Triangle Labs used in this case
 22g PETG or ABS preferred but works fine in PLA, I’m yet to have a PLA one get soft just went PETG as I had that loaded.
4 x M3 Heatset Inserts
In my case it was 3 x M3 x8mm to install to carrier as per X Carriage Build
2 x M3 x 16mm to install Sherpa Mini to mount.
2 x M3 x 16mm to install Cover plate over Carrier Plate as per standard build
53mm (est) Capricorn tube from Extruder to nozzle and 400mm Capricorn tube as reverse Bowden (not necessary in many configs)
Installation 
Print Carrier plate and all other pieces of X Carriage as wanted, insert all heat set inserts.
Remove old print head and install X carriage as per guide.
Uninstall old extruder, with machine off cut off old extruder plug ideally with a bit of extra length in my case 40mm but anything you can reconnect or solder is worth it. On cable coming from mainboard carefully solder on ensuring heatshrink is on wires the XH-4A or suitable for your kit. Shrinking down heatshrink when finished over connections.
Flip over printer, remove bottom and begin the process of adjusting stepper motor E0 on 0.0.2 Trigolla board. Many Youtube videos on this just be very careful as machine will need to be on during this step. Image taken from JJ Shankles Video on this I went with 0.52V on mine, a small screwdriver and a decent Multimeter is needed for this. https://youtu.be/GHtCsK7zlVs?si=IcIz4Qgw93iqvr9E Video Link of JJ Shankles.
Once voltage is set and you’re happy power down machine and reinstall base.
Install carrier plate and hotend, hotend, coverplate and installed onto carriage before installing Extruder worked best for me. Check Z Height and ensure that Capricorn tube from hotend is snug (Firmly) into the bottom of the extruder. In my case I ran the wires and the reverse Bowden tube roughly at this stage with some quick dirty tidying. Connect Extruder and start up machine.
 If running Klipper I have a base config in my GIT if running Marlin you may have to check extruder direction and potentially swap some pins around to reverse direction. 
Now you’re done with the installation, PID, Esteps (Rotation Distance) and the like will be needed but check the Z Height before doing anything else as it might now be slightly different. 
In slicer I had to change max Z height to 170 but you might be able to push a bit more.


Tippi Fruit Ornament Conversion Stem

Turn your [Tippi Tree](https://than.gs/m/933018) Fruits, Berries, and more into standard ornaments with this alternate stem. Feed a string or wire through the 2mm hole and it's good to go. Also great for making necklaces, earrings, car ornaments, and whatever else you can dream up!

Easy print, no supports required. 2-3 shells, 11% infill, 0.16mm layer height, or whatever suits your use.

Tippi Fruit Ornament Conversion

Tippi Tipmas Tree Branch Stacker

A special part that allows you to stack branches on branches on branches! I will use it to build my big Tippi Tipmas Tree to display ornaments from the Tippi Tree Ornament Contest :)

 

For the rest of the parts, check out my original tabletop game Tippi Tree!

Replacement Microphone Holder

If your mic holder snaps like mine did hopefully this print can save the day. The connecting hinge is 5.8mm wide with a 7.2mm hole. I used my heat gun to better form the clip to my microphone, [as shown in this video](https://youtu.be/bxhblZbzzjM).

 

I printed at 0.15mm layer height with 7 shell thickness for a strong print that should last a long time.

Snapmaker 2.0 TPU Clamp (for laser engraving & cutting)

Here is a simple part that I found to drastically improve my experience with the Snapmaker 2.0 laser module. Print in TPU to give the flex required to press fit into the laser bad and stay there. 

Unfortunately it seems like the other Snapmaker machines have different bed designs, so these might only work for the Snapmaker 2.0 models (350/250/A350T/A250T/F350/F250)

Gnurly Knob

A simple functional knob I designed for one of my printers, although it will work on most 1/4" shafts (common on electric guitars).

Head double fan Flying Bear Ghost 5 with BLTouch optional

Testa doppia ventola Flying Bear Ghost 5 con BLTouch opzionale

RODE smartLav+ to Handheld Mic Conversion

lavmic-handheld2.stl

mod

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GPU Support Star Spiral

G305 BXH logitech g305 shell mod 61g

GPU Support Triangle Pattern

Lightweight Mouse Shell Steelseries Sensei 310

Muzzle mod for a toy USP pistol

Ender3S1 - Spool_Holder.stl

Alpakka Dimpled Thumbstick Variant

Thumb Cap Compatible Alpakka Analogue Stick Mod

rta stand.3mf

FHW Mod Sec Sci Fi short end with gem

FHW Mod Sec Sci Fi Tall interlok gems

Ender 3 V3 SE Sharpie Marker Color Blender

Anycubic Mega S (Pro) X Carriage Sherpa Mini Carrier Plate V5 (Stock) Hotend

View 16 new models

View 78 new models

View 18 new models

View 21 new models

View 20 new models

Head double fan Flying Bear Ghost 5 with BLTouch optional

View 66 new models