EM-Smart Quick Z Adjust Drill Bit Adaptor

Quick Z Adjust Drill Bit_End.stl

Big Volume Knob for IKEA VAPPEBY, etc.

VAPPEBY_BIGvolume_flower_B.stl

IKEA LACK Hook Collection

LACK_Hook_Front.stl

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series] 

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Thompson Contender Butt Cover Replacement / Mod

TC Butt Cover with Logo.stl

Anet A8 Plus - Prusa Extruder Mod

Anet A8 Plus_PrusaEMod_Right.step

VKB MKI.3mf

Kobold Fighter

Kobold_Fighter.stl

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series] 

Python AMS Handle REMIX - Python Edition

Python AMS Handle P1S 3DPV 04mm.3mf

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

Top Plate.stl

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

VAPPEBY_Cover_Grid.stl

Insta360 Invisible Selfie Stick Spike

Stick this spike to the bottom of your Insta360 Invisible Selfie Stick to stab it into the ground for quick shots in grass, sand, dirt, snow, and other soft ground. Designed to print without supports. Just add a 1/4-20 bolt (any length), and screw into the threaded bottom of the selfie stick. It's that easy!

The Insta360 120cm Invisible Selfie Stick is available here (Insta360) and here (Amazon)

*Results vary based on how soft the ground is. Make sure the stand is firmly planted for the safety of your camera!*

Print solid for full strength. If the head of your bolt varies in size, reach out to me and I can make the necessary adjustments :)

Photographed model was printed with [Polymaker PolyTerra Matte PLA](https://amzn.to/3sULjWl) ([US direct](https://bit.ly/polyTerra))

mod

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

EM-Smart Quick Z Adjust Drill Bit Adaptor

Big Volume Knob for IKEA VAPPEBY, etc.

IKEA LACK Hook Collection

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series]

Thompson Contender Butt Cover Replacement / Mod

Anet A8 Plus - Prusa Extruder Mod

VKB MKI.3mf

Kobold Fighter

OP-1 BestCase Decksaver and Stand // Transcends [Red Eye Series]

Python AMS Handle REMIX - Python Edition

PolyDryer Annealing Mod – Soften, Dry & Anneal Your Prints

IKEA VAPPEBY GRID Kit // Cover, Volume Dial, and Handle

Insta360 Invisible Selfie Stick Spike

Thermaltake Tower 500 Mod - Top Vent Extension - With RGB Strip Slot

GPU Support Square Spiral CAD files

IKEA VAPPEBY VOXEL Kit // Cover, Volume Dial, and Handle

Constellation Alpha Split Trigger Mod

Bird Door Corner Decor

Half Life - FREE wall art

Cure plate Turntable Bracket