**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Flustra (Fluss-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the ripples underneath evoke a more dynamic sense of motion.


**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

The Flustra - Vase Mode Pendant Light (Large)_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**


_Twisting waves of passion move beneath your calm, organized exterior.  The Hestra is for you_
 
The Hestra (Hess-truh) Table Lamp brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the six underlying waves evoke a more dynamic sense of motion.

_Why hide who you are?  Let your passion shine through_



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**


**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
The lamp shad prints in Vase Mode/Spiralize/Spiral Vase Mode
The Base and cap print regularly without supports.  
**The base should be printed upside down**
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Hestra Table Lamp - Vase Mode STL and Bambu 3MF

The Hestra - Vase Mode Pendant Light Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  
 
**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**

_You cut a striking figure where the light and shadow meet.  To observe from just one angle leaves the picture incomplete_  

_The Trysta is for you_

The Trysta (Tris-tuh) Table Lamp graces each room with modern elegance.
 
The clean, ribbed design complements a wide range of aesthetics, while the vertical pattern both hides and accentuates the curves that lie within.

_What's holding you back?  Rendezvous with destiny_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf files optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode for the Lamp Shade
Regular printing for the Base and Cap
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Trysta Table Lamp - STL and Bambu 3MF

The Trysta - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_The sides of you others can't see convey a hint of mystery.  The Scura calls to you_
 
The Scura (Skyur-Uh) Pendant Light brings a modern vibe with a subtle twist

The clean design complements a wide range of aesthetics, while the broad, curved fins add a more dynamic sense of depth to the room.



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Scura represents the fourth design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Scura - Pendant Light, Vase Mode Bambu 3MF

The Scura - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

The Stria (Stry-uh) Pendant Light adds a touch of modern elegance to any room.
 
The clean, ribbed design complements a wide range of aesthetics.

You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.
 
This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Stria represents the first design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

For some spookier decor check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

**Safety First**
Intended for use with **9 watt LED Lights**.  Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers. 

100% Scale
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Stria - Pendant Light, Vase Mode 

Stria_PendantLamp_VaseMode_Bambu.3mf

**Print your own beautiful pendant lamp project!**
This project utilizes mostly 3D-printed parts and is ideal for a simple, modern living room.

**How does it work?**
The lamp is designed to snap together without any hardware, except for a light socket and cord.

**Colors:**
For the best visual effect, I recommend using lighter colors such as gray, white, or light brown filament. Dark colors will not produce the same lighting effect as shown in the pictures.

This is the filament I used for the Project.
PolyMaker PLA Peanut: (1.1 kg Needed pr. lamp)                   
https://amzn.to/4azt3lh  (Affiliate link)      
Copper PLA:  (0.2 kg Needed pr. lamp) 
https://amzn.to/3V04Oa2  (Affiliate link)   

**Printer & Material Requirements:**
The design has no built-in supports.
A printer with a build plate of 250x210x200mm or larger.
All parts can be printed without the need for a MMU.
All parts can be printed in PLA or PETG.

**Print the “Small Test Print”**

Print the “Small Test Print” to ensure the fitment is correct. If you are experienced with 3D printing, you may notice that the print seems more challenging than necessary. This is due to the small overhang perimeter, which I designed to ensure that the print bed texture appears uniformly on the entire lamp shade arm when the two parts are assembled.

**3D Printed Parts List:**
- Lamp Shade : Main Color
- Lamp Shade Top: 40 pcs
- Lamp Shade Bottom: 40 pcs
 
Mounting Rings Second Color:
- Top Ring: 1 pc
- Middel Ring: 1 pc
- Bottom Ring: 1 pc

**Hardware Required:**
I used the HEMMA IKEA light socket and cord, but the following Amazon light socket and cord should work as well:

- https://amzn.to/4dP7BM9  (Affiliate link)

I recommend the following light bulb because it does not produce much heat and allows full control over the lighting effects:

- https://amzn.to/3UVmEuP  (Affiliate link)


**Before Purchase.**
Be aware that this is a big project and requires a lot of print time and material. If you make this project, print 4 or 5 test pieces of the lampshade and all the mounting rings to check the size and fitment before printing all the pieces.

Elegant Pendant Lamp

Full Pendel STEP.step

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints** 

For a bowl version, check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

For another fun pendant light:
**The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

 
The Faces of Death Pendant Light brings a touch of the macabre to any room



**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Faces of Death - Vase Mode Pendant Light, Bambu 3MF

Faces of Death - Vase Mode Pendant Light_Bambu by Mimetics3D.3mf

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_You cut a striking figure where the light and shadow meet.  To observe from just one angle leaves the picture incomplete_  

_The Trysta is for you_

The Trysta (Tris-tuh) Pendant Light graces each room with modern elegance.
 
The clean, ribbed design complements a wide range of aesthetics, while the vertical pattern both hides and accentuates the curves that lie within.

_What's holding you back?  Rendezvous with destiny_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Trysta represents the third design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**

**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Trysta - Vase Mode Pendant Light with Bambu 3MF

The Trysta - Vase Mode Pendant Light_Bambu by Mimetics3D.stl

This is a Japanese Andon-Style Lamp with Ginkgo Line Art side panels.
If you want to give your home a Japanese vibe or need a cool accessory for your Manga corner, this lamp is for you.

The parts are easy to 3D print with FDM printers.
The Lamp is designed with a one-piece light diffuser insert and the parts snap together to allow a glueless assembly!

You can choose between different Ginkgo patterns for the side panels.

The wood structure is designed into the 3D model. So even if you don’t print with wood filament, you’ll still get a wooden look.

The lamp is designed for E26 and E27 sockets.
Example:
https://amzn.to/4muXQWe

Please check the needed socket and voltage rating for your local power grid!
Use a warm white LED light bulb to get the cozy ambient effect.

3MF Bambu Studio file for a print ready lamp is included.

----------------------

**Info**
Min. required printer build volume: 250 x 250 x 250 mm (WxDxH)

The 3MF Bambu Studio file is setup for a 0.6 mm nozzle to print wood filament without the risk of clogging. Printing with a 0.4 mm nozzle will also work, if you choose not to print with a wood filament.

I used the following Filaments on this Print:

Frame, Pillars and Side Panels:
iSANMATE Wood PLA with 20% real wood powder: https://amzn.to/4qLIkZ8

Light Diffuser Insert:
Bambu Lab PLA Basic White: https://eu.store.bambulab.com/de/products/pla-basic-filament?id=42911327846619

Connectors: 
SUNLU High Speed PETG Black: https://amzn.to/4tddZo0

----------------------------------------------------------------


**Join the NerdMaker Community**
[YouTube](https://www.youtube.com/@DominicSchwarz?sub_confirmation=1)
[Twitch](https://www.twitch.tv/nerdmaker86) 
[Discord ](https://discord.gg/9jppu3AxJK)
[Instagram ](https://www.instagram.com/nerd_maker_engineer)
[Facebook ](https://www.facebook.com/nerdmakerengineer)

--------------

**License**
A Commercial License, to sell 3D-Prints of my Models, is available here:
[Patreon ](https://www.patreon.com/NerdMaker)


All amzn.to links are Amazon Affiliate links. If purchases are made via these links, I receive a small commission from Amazon. Of course, this does not change the price for you.

Japanese Lamp Ginkgo Line Art

Side Panel Ginkgo Line Art 1.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
The first computer I used and bought in my life was an Apple computer. I like the easy-to-use and familiar interface of Apple computers, so I've only been using Apple computers since then. So, I designed a product using the design of an Apple product. I have already designed my first PowerBook as a product that holds business cards and SD cards.
https://fab365.net/items/140

This time, Steve Jobs came back to Apple and designed a product that took advantage of the design of the iMac, which helped revive Apple.

In order to maximize the original design, the folding method was reduced, and a separate printing and assembly method was adopted.

The screen uses the Lithophane technique to express the Mac OS 9 startup screen and the photos of Steve Jobs inside each screen.These pictures are shown on the inside of the screen model, not on the outside, so you need to put an LED candlelight to see it.LED candle lights can be purchased at IKEA and many other online shops.

※ You should never put in real candlelight. ※

https://youtu.be/FhMFMc4BAHU
https://youtu.be/t06LD_oI8sI

iMac_classic_lighting

GOODesign_Screen_Steve Jobs.stl

Discover this unique 3D model of a Neapolitan Horn Voronoi Lamp on thangs.com. Crafted by TurcoDesign, this intricate model imposes a modern twist on traditional interior design, adding the perfect touch to any home decor. The lamp is a part of the extensive "Home/Interior Design" category. With an intricate structure optimized for 3D printing, it showcases an exquisite application of the Voronoi mathematical model, resulting in a piece that looks like an artwork itself. The high-quality images provided give a further glimpse into the striking design features of this 3D model, displaying its detailed structure from every angle. For more detailed information, visit the designer's page on thangs.com. Bring a piece of Neapolitan charm into your home with this unique Voronoi Lamp 3D model. Ideal for hobbyists, 3D printing enthusiasts, and interior design professionals.

CVORON 

Corona Cvoron.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
To celebrate Easter, we designed Easter egg lighting that expresses the story of Jesus' resurrection. I couldn't cover all of them, so I expressed some 4 of them.

1) Jesus was nailed to the cross, 2) the soldiers cast lots to be faithful. 3) Jesus is placed in a tomb, and 4) Jesus is finally resurrected. The contents are expressed in pictures, and Bible verses are indicated.

If you put an LED tea light candle light inside the egg, the light will come out between these paintings and you can use it as a light.

https://youtu.be/s4g9ZUzer1Y

Easter is a good day to share blessings with each other, but I want you to remember its original meaning as well.

Happy Easter!

Easter story egg lights

GOODesign_Easter_Story_Egg_Light.stl

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out the latest 3 table lamps here:
Stria Table Lamp: https://than.gs/m/1049903
Trysta Table Lamp: https://than.gs/m/1049896
Hestra  Table Lamp: https://than.gs/m/1049906**

The Stria (Stry-uh) Table Lamp adds a touch of modern elegance to any room.
 
The clean, ribbed design complements a wide range of aesthetics.

You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.
 
This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**For some fun pendant lights, check out:
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980
The Flustra - Vase Mode Pendant Light (Large): https://than.gs/m/1047316**

For some spookier decor check out:
**Faces Of Death Bowl - Skull Bowl - https://than.gs/m/1046122**

**Safety First**
Intended for use with **9 watt LED Lights**.  Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
Base and Cap print in regular mode
0.55 mm wall thickness
8 bottom shell layers. 

100% Scale
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


Stria Table Lamp - STL and Bambu 3MF

**Vase Mode, No Supports, Quick Print**
**Subscribe To the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true) for rights to sell prints**  

**Check out a spookier pendant light here
Faces of Death - Pendant Light, Vase Mode: https://than.gs/m/1046980**

_Twisting waves of passion move beneath your calm, organized exterior.  The Hestra is for you_
 
The Hestra (Hess-truh) Pendant Light brings a modern vibe with a subtle twist

The clean, ribbed design complements a wide range of aesthetics, while the six underlying waves evoke a more dynamic sense of motion.

_Why hide who you are?  Let your passion shine through_

**Model Details:**
You can start printing this model right away on a Bambu printer using the prepared 3mf file optimized for printing this model.

This model is designed to fit this Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

The Hestra represents the second design in the Mimetics3D Home Decor collection.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the [Mimetics 3D Commercial Tier on Thangs.](https://than.gs/u/934587?plans=true)

**Assembly Instructions**
Refer to the video in the image carousel

**Other Home Decor:**
**The Hestra - Pendant Light, Vase Mode: https://than.gs/m/1042357
The Trysta - Pendant Light, Vase Mode: https://than.gs/m/1042457
The Stria - Pendant Light, Vase Mode:   https://than.gs/m/1042321
The Scura - Pendant Light, Vase Mode: https://than.gs/m/1046091**



**Safety First**
Intended for use with **9 watt LED Lights**  
Other lights can get too hot and damage/deform the plastic

**Print Settings:**
Vase Mode/Spiralize/Spiral Vase Mode
0.55 mm wall thickness
8 bottom shell layers
Print with the circular cut-out on the build plate

**100% Scale**
Attempting to scale this model up or down will prevent the opening from fitting the intended Pendant Light kit:
https://www.amazon.com/dp/B0CHHVSLQ1

Please let me know if you would like to see other variations of this lamp.


The Hestra - Vase Mode Pendant Light, Bambu 3MF

The Hestra - Vase Mode Pendant Light by Mimetics3D.stl

UPDATE: The [pendant light kits](https://a.co/d/0j8XEl0) that I typically use are currently not available on Amazon and I can't find them anywhere else besides [Alibaba](https://www.alibaba.com/product-detail/-US-Gauge-wire-303-US_1600441053761.html). I'm hoping they'll be back on Amazon soon, but I've added a variation of the lamp base and bottom cap to fit [these pendant lights](https://a.co/d/9PMZ6YD) that are available on Amazon. They're actually a lot nicer and also come in black! Think I'll start designing my lamps around these from now on.

The new pendant lights are a little wider than the old ones. The modified files that fit the wider sockets are named Nora Lamp Bottom Cap 2in Socket.stl and Nora Lamp Base 2in Socket.stl.

---

I have a few lamps ready for release at the moment so let's start with this one! The Nora Lamp features a couple improvements over my previous lamps.

Note that you must **only use LED bulbs (9 watts max)** as traditional bulbs can get pretty hot and could cause damage to the plastic. I like multi color smart bulbs that I can control with my phone, but any standard 9W LED bulb will do.

**Bottom Cap**
I had a lot of requests for a bottom cap to keep the cord in place. It's meant to be a tight fit and snap into place. There's a hole in the middle so you can grab it and pull it out if you need to.

**Lamp Shade**
The shade can be printed with in infill or in vase mode (recommended). The shade you see in the photo/video was printed in vase mode with extra bottom shell layers for the shade supports (not 3D printing supports, but the part that connect the shade to the base).

**Tips for printing the shade:**
If printing the shade in vase mode with a .4 nozzle at .2mm layer height — use 19 bottom shell layers. You can adjust these if you're printing with a different size nozzle or layer height. The extra bottom shell layers forces the shade supports to print with an infill, then start printing in vase mode the rest of the way up. This takes about 1hr 43m to print.

If printing using an infill, I'd recommend adding a height modifier that's the height of the shade supports, and using a grid infill for that part. Then use a concentric infill for the rest of the shade. This takes around 3.5 hours and definitely doesn't come out as clean as vase mode, so not recommended, but it's an option!

**Supports**
Supports are needed for the lamp base. There's a lip inside the top hole to keep the socket from going all the way through. Supports aren't necessarily required for the cord hole on the bottom, but I used them anyway since it didn't add much time and the results were super clean.

**Scaling**
I wouldn't recommend scaling this one since it perfectly fits the pendant light socket.

**Orientation**
All three parts should be oriented upright, how you'd expect them to be.

**Lamp Base Print Settings**
.2mm layer height
15% grid infill
2 walls

**Filament & Hardware**
Filament I used for this print: Overture Matte Black PLA

------------------------------------------------------------------------------------------

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

lighting

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

The Flustra - Vase Mode Pendant Light (Large), STL & Bambu 3MF

Hestra Table Lamp - Vase Mode STL and Bambu 3MF

Elegant Pendant Lamp

Japanese Lamp Ginkgo Line Art

iMac_classic_lighting

CVORON

Easter story egg lights

Nora Lamp