Thermoflask 4th Axis Laser Attachment Support

This model is a bottom end cap with center hole for a Thermoflask 40 oz/1.2 L. Model is for supporting for tailstock end during laser engraving. 

The center support for the center hole could be removed. Clean up the model, and use as a replacement bottom cap for the bottle. The world is your oyster.

Inner diameter is 91mm

Outer diameter is 94.5

Successful print made with:

PLA

200c .4mm nozzle (PLA)

160c .4mm nozzle (Snapmaker support filament)

60c bed

.16mm layer height

25% Cubic subdivision infill

Printed on a Snapmaker Artisan 3in1 printer using dual filament nozzle 

xTool D1 Leg Tie Down v1.stl

This is a very simple way to fasten your xTool D1 to your wasteboard, some might call it a spoilboard.  You must remove the rubber stoppers under the stand-offs, otherwise they will not fit.

laserengraver

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Thermoflask 4th Axis Laser Attachment Support

xTool D1 Leg Tie Down v1.stl