Mini-Flower Lamp

PARALUME FLOWER LAMP.stl

SAN  |  Pendant Light E27 & E26 fast print

SAN_pendant-light_Small_0.5mm-Bottom-section.stl

Giant Voronoi Split Globe Lamp

voronoiGlobe.stl

Pallino Lamp

TOP PALLINO -1.stl

Moon Light // Dome Light Cover

Moon Lamp.stl

Cat-Lamp

head

Painter's Brush Stache // Lil'Hats'N'Stuff

A tiny mustache... or a tiara... or a hairstyle... wear 'em how you like!

 ---

18mm inner diameter, scale as required or desired ;)

---

[More Lil'Hats'N'Stuff](https://thangs.com/?tags=lil%27hats%27n%27stuff&sort=likes&range=alltime#content)

[Relevant Video](https://youtu.be/TeOiT-DbVNQ)

lampshade 

Lampshade with line design that when printed at a 100% will be 26cm high, the widest part is 29,6cm, the opening under is 25,5cm , the top is about 10cm with a hole in it of 6mm.
It can be you need to drill the top hole a bit wider that depends on the wire you are using and you will need to print with the top on the bed and just a little support for the beginning of the lines.

Tube lamp #FunctionalArt

Tube lamp base

Standard Lamp : Print and Grow

Lamp Shade.stl

Retro Vase Drum Style

Retro Vase Drum Style. Print in vase mode with a .4 nozzle at 0 .1mm layer height with 75% perimeters overlap. 8 bottom layers.

Can also be used as a votive LED light holder.

Creative Commons License 4.0 BY-NC-ND


VORONOI DONUT.stl

voronoi lamp 122 simple .stl

Voronoi lampshade 21.stl

Voronoi design 010 STL Scalable

Lamp For usual E27 socket

BASE LUMINARIA-final.stl

Wavy Lampshade

This is designed to be printed in vase/spiralise mode

Recommend increasing the number of bottom layers  just so the light attachment is nice and solid :)

There's also a version of this without the light fitting - can be used as a bowl/vase/tealight holder etc. you can find that here:


This was designed using full control gcode - if you'd like to know more, I've written an instructable on creating lampshades and you can check out their own site too
https://www.instructables.com/3D-Printing-Lampshades-With-Full-Control-Gcode/
http://fullcontrolgcode.com/

Printed in Greengate3D purple reign PETG

Wavy Lampshade.stl

Fischer-Koch C(Y) Lampshade

Lampshade Fischer-Koch C(Y) 200mm.stl

Voronoi Lamp shade Filled hole

Voronoi Lamp shade 280mm diameter 164mm high, 30mm hole for lamp holder.
Designed for my sons bedroom, where its printed in transparent blue filament.
Two designed one open hole that projects the pattern out, one holes filled with thin layer that defuses the light.
Its quite chunky voronoi so its pretty sturdy and prints easily.
Print out of heat resistant filament (ABS,ASA etc.) or use low wattage LED bulbs so should it be safe with PLA/PETG, i.e. don't be stupid and burn your house down.
Needs a 300mm bed to print comfortably.
~54 degree angle for overhang quite easy for most printers with decent cooling.
Looks good with transparent filament as well as opaque.
I Printed 0.2 but should work fine for fatter layer and/or a 0.8 nozzle.
I printed with 4 walls as it reduces print time as has less internal supports and more continuous moves.
For bed adhesion I advise external and internal brim ~5mm no other supports needed.
Do a temp tower to ensure you don't get too much stringing etc.

Voronoi Lamp shade

Voronoi Lamp Shade open

lampshade

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Mini-Flower Lamp

SAN | Pendant Light E27 & E26 fast print

Giant Voronoi Split Globe Lamp

Pallino Lamp

View 10 new models

Cat-Lamp

View 66 new models

lampshade

Tube lamp #FunctionalArt

Standard Lamp : Print and Grow

Retro Vase Drum Style

VORONOI DONUT.stl

voronoi lamp 122 simple .stl

Voronoi lampshade 21.stl

Voronoi design 010 STL Scalable

View 14 new models

Wavy Lampshade

Fischer-Koch C(Y) Lampshade

Voronoi Lamp shade Filled hole

Voronoi Lamp Shade open