Kabar Refrigerator Magnet

BDFM_Knife_handle

Viking Axe Fridge Magnet

Viking Axe Fridge Magnet.stl

Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

WoW Doomhammer Fridge Magnet

Doomhammer.stl

Viking Axe R3 - Magnet.stl

Dyson handheld vacuum nozzle

Dyson_Wide_Nozzle.stl

Viking Axe2 - Magent.stl

NESPRESSO CAPSULE HOLDER FOR 3 UNITS

ToolGrid - 6mm Dremel Bit Stand V1.1

Single Grinder Bit V1.1.stl

Fridge Bottle Holder

fridge bottle wine 90mm.step

Nespresso coffee pod holder 

coffee pod holder.STL

120mm Fan Desktop Air Filter

Air Filter Body.stl

Trident Fridge Magnet

Trident Magnet

Nespresso Vertuo Pod Holder

Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and out of the holder/rails.

I printed with supports for the small overhang that the pods slide into.

_Licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license._

Simple Cord Organizer

Simple small appliance cord organizer that can be stuck onto stand mixers, food processors, blenders or other devices that have cords but no elegant way to store them.

Licensed under a
Creative Commons Attribution-NonCommercial 3.0 Unported License.

Water Fountain/Filter #FunctionalArt

**Water Fountain/Filter**
This is a really cool outdoor water fountain that doubles as a water filter! It is small and can be taken anywhere, and in emergencies you can filter out all the filthy stuff in water. (Except for bacteria). It is a super fun, cool, and practical design. 

_How to use_
In the first section fill with water. The water will automatically flow to the second section. In the second section you will want to put in smaller pebbles and rocks. In the third section you will want to put in charcoal (This is optional. It helps give the water flavor). In the last section put in sand. This will filter out all of the filthy particles in the water such as fish poo, dirt, etc. **If in a camping situation just be sure to boil the water to kill any harmful bacteria as this filter won't filter out bacteria.** _In case of emergency and you have no access to fire you can drink the filtered water. Symptoms of sickness will appear after about a week. _

Water will take a while to get to the bottom as it has to go through several small holes, not to mention the sand and charcoal. 
**Print Information**
You can print in any nozzle size from .4mm-.8mm. You can use any layer height from .16-.28mm. 
**NO SUPPORTS** This models is designed to be printed without any support material. 
I would recommend using a brim just to make sure that the legs don't fall over when printing. 

#OutdoorThangs
#OutdoorThangs

Asthetic Water Filter.stl

Gridfinity Blender Brush Holders

Blender Brush Holder 2x2 Grid 3x3 Pockets.stl

Activated Carbon HEPA Filter

Filter_Body_x1.stl

Dyson V12 Filter Cleaner

Dyson_V12_Filter_Cleaner.3mf

Coffee Frother Stirrer Beverage Drink Mixer Stand

Made this stand for a coffee frother / stirrer / mixer / drink mixer.

Not sure the best orientation to print it but the layer lines really show printing it flat on back like i designed it to be printed. maybe a resin printer would work better possibly. or try to print it vertically if you want.

home appliances

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Kabar Refrigerator Magnet

Viking Axe Fridge Magnet

Citrus juicer “Boaty”

WoW Doomhammer Fridge Magnet

Viking Axe Fridge Magnet

Dyson handheld vacuum nozzle

Viking Axe Fridge Magnet

NESPRESSO CAPSULE HOLDER FOR 3 UNITS

ToolGrid - 6mm Dremel Bit Stand V1.1

Fridge Bottle Holder

Nespresso coffee pod holder

120mm Fan Desktop Air Filter

Trident Fridge Magnet

Nespresso Vertuo Pod Holder

Simple Cord Organizer

Water Fountain/Filter #FunctionalArt

Gridfinity Blender Brush Holders

Activated Carbon HEPA Filter

Dyson V12 Filter Cleaner

Coffee Frother Stirrer Beverage Drink Mixer Stand