Easter Bunny Container - Small Size - 72x66x144

Easter_Bunny_SMALL_Full_72x66x144.stl

Light up Tree Christmas Decoration

Tree.STL

Pumpkin-Shaped Stash Jar

PUMPKIN JAR [BOTTOM].stl

Halloween Candy Skull

HCS-R02.STL

Happy Halloween Wall Decor Sign

Happy Halloween.stl

12 Dragon Eggs of Christmas Advent Eggs

12eggs-blank.stl

Winged Kaleidoscope Christmas Ball

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems and diamond patterns.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 6.5 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height or even adding infill. Infill is counter-intuitive, but it means the hot end moves to a different part of the layer, giving the outside a chance to cool. 

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm
* Alternate Extra Layer: Yes

I had the best results using Cura setting the default width to 0.4 mm with an alternate extra wall. 

*Infill*
I would recommend adding 100% infill to the loop at the top of the ornament to make the loop stronger, but I wouldn't add infill anywhere else. It just adds weight.

To add infill (or extra walls, tops or bottoms) to just one area of an object in Cura:
1. Add a support blocker
2. Select the support blocker and scale and position it where you want the added infill
3. Select “Per Model Settings” then select “Modify Settings for Overlaps”
4. Select “Select Settings” and check “Infill Density” then select “Close”
5. Enter the amount of infill you want

*Speed*
* Outer Wall: 20 mm/sec
* Inner Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
You will probably need supports for bed adhesion.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

I also added a custom cylindrical support to either side where the bottom ledges intersect. This not only helps with printing the point of intersection, it help prevent the model from wobbling or coming loose from the print plate.

Halloween Candy Bowl

Halloween Candy Bowl by Mesh Mayhem.3mf

Santa Hat Ornament

Overly Excited Reindeer Christmas Ornament Bambu Files

Reindeer Ornament.stl

Santa flying over Christmas Tree

Front panel.stl

Amazing Christmas Tree Topper - FREE

Christmas tree topper_Full.stl

Ask Santa for a 3D dragon!!

This display stand is perfect for upcoming craft fairs!  
I'm adding a collection of display signs to the page for craft fair vendors, a few fun ones and a few with prices on them.  The ones with pricing start at $5 and go up to $50 in increments of $5.00 per display.  I printed these on the bambu with AMS, once you download the STL you will need to paint them in bambu studio.  Make sure to print them with the words or prices against the buildplate.  Looks best with the textured PEI sheet.  You can print 6 of these on one bambu bed at a time.

This File is for personal use, for commercial use please join the membership.

COMMERCIAL LICENSE - With your active support to Rytek through their Thangs membership you have a commercial license to legally sell 3D prints of my designs on any online platform or physical store or booth of your choice. You must be the one printing the files as the file is not to be shared. 
All digital files are NOT to be resold or redistributed by any means. - This commercial license is only valid during your active Thangs Membership support. If you decide to no longer support my Thangs account the commercial license will end at the time your paid access expires.

Recommended Printing settings - 
0.4mm Nozzle
Printing at 0.20mm Standard settings in bambu Studio
Filament type: PLA
Infill % : 15%
Infill Pattern: Gyroid
Supports: NO
Brim: No
Raft: N0
Skirt: No


Halloween Sign_SUNLU

SUNLU designs for Halloween 2023

Visit www.sunlu.com for more information

Halloween Sign.stl

Christmas Lamp Post - Christmas Day 15

lamp-pole-roof.stl

Green and White Ranger Christmas Tree Ornaments

christmas_tree_ornament_green.stl

Happy Halloween - haunted tree.stl

Happy Halloween Decoration 

It's a super-easy-to-print design that doesn't require any backing. Prints flat.

**Print settings** : 
- 10-15% infill
- no support
- PLA Black from Ariane Plast

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Easter Egg Cage - decoration

Can be printed at normal size or bigger. I printed at 285% on the P1P without big problems.

2D Bat Halloween Decorations

2DOutlineBat.stl

HALLOWEEN LOVELY ANGRY CAT - HAT

Find the Lovely Angry Cat Model here: https://cults3d.com/en/3d-model/art/lovely-angry-cat

 This is the famous Lovely Angry Cat Halloween Version, with a witch hat and it can suddenly become angry! Don’t mess with him or with his close friends.

 Surprise your friends and relatives with his moods change.

 This cat combines a smooth mesh with a precise and robust moving mechanism.  Totally developed to be 3d printed avoiding the use of bearings or any metal parts.

  You can easily assemble it, and there is also a tutorial video if needed. 

 In the package, there is a stl file with all the parts correctly oriented on the printing bed if you want to print everything together without supports.
OBS: YOU NEED SUPPORTS TO PRINT THE HAT!

 Please feel free to share the images of your prints, that would be great!

 Don't forget to hit like and follow us! Every week we will be posting new models for you!

3D PRINTING SETTINGS
3D PRINTING SETTINGS

Dimensions(mm):145 x 80 x 110mm

Layer heigh: 0,2mm

Walls: 2

Infill: 5%

Material: PLA or ABS

Base speed: 60mm/s

Printing time: ~15,5h

holidays & Seasonal Events

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Easter Bunny Container - Small Size - 72x66x144

Light up Tree Christmas Decoration

Pumpkin-Shaped Stash Jar

Halloween Candy Skull

Happy Halloween Wall Decor Sign

12 Dragon Eggs of Christmas Advent Eggs

Winged Kaleidoscope Christmas Ball

Halloween Candy Bowl

Santa Hat Ornament

Overly Excited Reindeer Christmas Ornament Bambu Files

Santa flying over Christmas Tree

Amazing Christmas Tree Topper - FREE

Ask Santa for a 3D dragon!!

Halloween Sign_SUNLU

Christmas Lamp Post - Christmas Day 15

Green and White Ranger Christmas Tree Ornaments

Happy Halloween - haunted tree.stl

Easter Egg Cage - decoration

2D Bat Halloween Decorations

HALLOWEEN LOVELY ANGRY CAT - HAT