Arduino UNO Mounting Plate

Mounting__Plate.STL

Meditative Muse: Incense Holder

texturizeincese.stl

GEN2 Adjustable Steel Sheet Holder - Large

gen2-steel-sheet-holder-sides.3mf

Dewalt Battery Holder

Dewalt Battery Holder.stl

Ryobi Battery Holder

Ryobi Battery Holder V1.1.3mf

J1772 EV Charger Cable & Plug Holder

J1772 Holder V1.11.stl

PLEIADES Tealight Set // 4 Candle Holders

Tealight 0.8 vase Medium.stl

A Door For Your Door

This is a door to place under your door to keep it open. The model is about 1 inch tall so should be tall enough for all your door needs.


I printed mine with 5 walls and 25% infill with connect infill lines set to true.

Replacement Microphone Holder

If your mic holder snaps like mine did hopefully this print can save the day. The connecting hinge is 5.8mm wide with a 7.2mm hole. I used my heat gun to better form the clip to my microphone, [as shown in this video](https://youtu.be/bxhblZbzzjM).

 

I printed at 0.15mm layer height with 7 shell thickness for a strong print that should last a long time.

Dowel Centering Jig for Drill Press

I made this quick jig to help with drilling holes into round dowels on my drill press. The flat sides allow it to be clamped down and the angled design lets you center various sizes of dowels.

As used in my Mid Century Planter video



 

Magnetic Stopper for Cabinet Doors

I had some cabinet doors that wouldn't stay shut, so why not print some quick little magnetic stoppers and save a trip to the hardware store?

These work with [3mm x 6mm magnets](http://bit.ly/DiscMagnets). I printed the model using [Fillamentum 98A Flexfill](http://bit.ly/flexFill) (Pistachio) and also used some metal thumbtacks I had around, although you could simply use two of these stoppers back to back for twice the holding strength!

Glued with [E6000 adhesive](https://amzn.to/3snLNUE). I made a little video about it [on Youtube](https://www.youtube.com/watch?v=JtTyb5e-aKE).



SUP (Stand-Up Paddle) fin clip/retainer 

Most Stand-Up Paddle boards require a small clip to hold the fin. This replacement is quite handy if you lose or break your clip and still want to use the board.

SUP (Stand-Up Paddle) fin clip

Remix of 4x6 Picture Frame Template.stl

Picture Frame Template for Thangs official Remix Challenge

4x6 Picture Frame Template.stl

Flat Bottom Mount.stl

This is a flat mount that can be used at the bottom as a constraint for any rotating object.

It can be considered as an a-arm for small cars and two holes can be used to attach the mount to the chassis while the big hole can be used to insert the upright into place.

Angular Mount.stl

This is an angular mount/frame that can be fixed to any horizontal surface using fasteners. The two angled triangular faces can be used for mounting any required object at an incline. 

Sliding Mount.stl

This is a mount with a single attachment point which can be slid on rails.

Supports required for printing.
Can be scaled as needed.

hold

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Arduino UNO Mounting Plate

Meditative Muse: Incense Holder

GEN2 Adjustable Steel Sheet Holder - Large

Dewalt Battery Holder

Ryobi Battery Holder

J1772 EV Charger Cable & Plug Holder

PLEIADES Tealight Set // 4 Candle Holders

A Door For Your Door

View 18 new models

View 20 new models

View 66 new models

SUP (Stand-Up Paddle) fin clip/retainer

Remix of 4x6 Picture Frame Template.stl

Flat Bottom Mount.stl

Angular Mount.stl

Sliding Mount.stl

3DTROOP COASTER

Octo Twist Box