Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Get ready for spooky season with this spider web lid for the [Desk Grommet System](https://than.gs/m/924318)

Watch the demo clip

Download more lids for the Desk Grommet System.

Remix these to create your own custom lids to fit your needs:
- (REMIX ME) Hexagon Lid: https://than.gs/m/924379 
- (REMIX ME) Round Lid: https://than.gs/m/924377


Chemisty Stencil - BackToSchool

Chemistry stencil - Design based on the Ochem Stencil

Chemisty Stencil.stl

Hexagon Lid (6-pointed) for Desk Grommet System

Desk Grommet System | Base Screw & Nut: https://than.gs/m/924318

Hexagonal Jar

Hollow Jar.stl

Circular panel (Interchangeable Vase)

Display Only Interchangeable Circle Vase.obj

Hexagon Magnetic Fidget Toy

hexagon rings.stl

Tiny Spool

This tiny spool is really handy when you need to divide down a large spool so that many printers can use that filament at once or even just to use up small samples you may have.

The design prints without support and is press fitted together. Catches hold the two parts securely together. 

The inner diameter of the spool is designed to friction fit to the end of a drill to enable speedy spooling!

The STL files contain solid models but if you'd like the hexagonal pattern shown in the pictures use the 3mf files. They apply settings which make the first 2mm print without top or bottom layers and with 10 perimeter walls.

tiny spool2.stl

Tetrahex Lamp

Tetrahex Lamp.stl

Mattress Asterisk Tile

Mattress Asterisk — because it’s fun to say! This is a purely aesthetic remix of Zack Freedman’s basic Asterisk Tile — now with an ultra-plush pillow top!

Print Settings

This tile should be properly oriented & is designed to be printed without supports. For best results, print using a 0.2mm or smaller layer height. I used 40% infill, but you can experiment with other infill densities if you’d like.

Value4Value

This remix is being released under the Value4Value model. If you received any value from my work, please determine what it was worth to you & return that value to me in the form of a donation. Thank you for supporting my work!

Print Info

Printer: VORON 2.4 350
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 40%
Filament: MakeShaper White PLA

“If I have seen further, it is by standing on the shoulders of Giants.” — Isaac Newton

This tile was remixed from the original Asterisk Tile by Zack Freedman using Fusion 360.

Honeycomb vase (Vase No. 12)

These files are for Personal Use Only. If you would like a Commercial License to sell prints made from these designs, please join me on Patreon: https://www.patreon.com/kazitoad

This vase model has a concave bubble texture. 

It is specifically designed to be printed in spiral vase mode, printing with one continuous outer wall, to print quickly, without a seam or support.

I suggest using a large nozzle, line width, and layer height. I also suggest printing in spiral vase mode with 6 bottom layers and only 1 outer wall.

Checkout my other models :)

Hex vase | Vase mode

Hex vase.stl

Rising Sun Box 

Rising Sun Box.obj

EL Wire Hearts Container

Hearts Jar Single Print.stl

Draining Soap Dish

Soap Dish.stl

Hexa-hunt (fully 3d Printable Board Game)

Game_Board.stl

hexagonal honeycomb

A generic honeycomb generator that produces hexagonal combs which kind of makes sense. Also they are better suited to be printed on circular printbeds.

The defaults in the scad creates a honeycomb compatible with  the Honeycomb storage wall by RostaP that fits a 230mm circular printbed.




Overlook Hotel Carpet Retro Coaster

retro_coaster_overlookcarpet.stl

Hexagon - Remix of 4x6 Picture Frame 2

4x6 Picture Frame Front Template.stl

Honeycomb Hex Bin "B"

These are a set of bins I designed specifically for a built-in in my apartment. This one measures 8 inches wide by 5 inches deep by 9 inches (ish) tall (sorry for the units my EU friends).

I've found PETG performs best with this particular model. PLA works, however I usually had a lot of cleanup on the stringing in the hexes afterwards, whereas PETG @ 230c and 150 mm/s worked nearly flawlessly without any stringing.  Please comment your successful settings though as I am still having trouble getting the floor of the bin to print without blistering when using Concentric patterns or the like.

Designed in Tinkercad, the hex pattern is a repeating pattern trimmed on the edges, so re-sizing to whatever dimensions you need should be pretty simple, but message me if you need a particular set of dimensions and I might take a crack at it if I have time. Tinkercad file below to remix with if you want:
https://www.tinkercad.com/things/hZ36bubRkEJ?sharecode=ZK1efOMKQ0vd52pIDA50fgz2jkDBfDEKqysG56LNbEQ

Cress Seed Planter

cress_pot.stl

hexagon

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Spider Web Hexagon Lid for Desk Grommet System | Halloween Desk Decor

Chemisty Stencil - BackToSchool

View 12 new models

Hexagonal Jar

Circular panel (Interchangeable Vase)

Hexagon Magnetic Fidget Toy

Tiny Spool

View 12 new models

Mattress Asterisk Tile

Honeycomb vase (Vase No. 12)

Hex vase | Vase mode

View 12 new models

EL Wire Hearts Container

Draining Soap Dish

Hexa-hunt (fully 3d Printable Board Game)

hexagonal honeycomb

View 10 new models

Hexagon - Remix of 4x6 Picture Frame 2

View 11 new models

Cress Seed Planter