Helix Spiral Table Lamp - Mid-Century Modern Desk Light

Diffuser.stl

DNA Cookie Cutter STL File - 4 inches

DNA 4 B.stl

Propeller for oxygen concentrator

Helix.stl

Ad Rem Infinitum An Abstract Tulip Vase

result (2).glb

Alpine Helix Vase – Modern Spiral Decorative Planter STL

alphine_fixed.stl

Slime Ball Fidget Toy by Ruven Bals Print in Place

Slime Ball by Ruven Bals.3mf

Large Helical Heart with Secret Compartment

Large Helical Heart with Compartment.stl

Impossible Pass Helix 5 Pack

captured ball helix 3mf.3mf

Sloppy Coiled Rope Bowls

Sloppy Coiled Rope Bowl 1.stl

Small Helical Heart

This “Small Helical Heart” twists apart into two separate but identical pieces. Print in different colours to highlight the spiral curves.

The “Large Helical Heart” has a hidden compartment for rings or contraband.

See here for video: https://youtu.be/SSzDglASqT4 

Two “Helical Hearts” available:
Large (plain and with hidden compartment):
Small:

The “Large Helical Heart” is 80mm at the widest point, the “Small Helical Heart” is 50mm at the widest point.

Print two copies of the file. In order to preserve a smooth sliding contact surface, print the files on the side as they are oriented. Try raising the model off the bed by 3mm or so and building tree support up to the overhangs.


Small Banana Springo // Fruit Springos

banana-half-singlepart.stl

Plain Seashell for Remixing

Plain Seashell Sample Cross Section.stl

KROMATIK Pot 003

KROMATIK_003_wHoles.stl

Pineapple Springo // Tasty Springos Pack No.1

pineapple-full-bot.stl

helix · catchall bowl

bowl_2_cprt.stl

Cube and helix, impossible passthrough illusion

Wavy Springo

Another amazing Springo printed without supports using regular old PLA! This Springo has a smooth wavy surface that can come off as fun or classy, depending on your color choice.

 

Print at .15mm layer height for this to work correctly. Check the layers in your slicer, there should be a 1-2 layer gap between each layer of the spring. I print with 3 shells/outlines and 7 top, 6 bottom layers so the spring itself is solid. After printing, separate carefully with a palette knife, butter knife, etc. How easily the springo separates will vary based on your printer, filament, slicer settings, etc.. So good luck and please share your results!

You should be very cautious separating the layers of the Springo, but once it's correctly popped apart these things are surprisingly resilient for PLA prints. 

Model photographed was printed with [MatterHackers PRO PLA Neon Green](http://bit.ly/NeonGreenPLA). It looks wicked, and glows under a black light!

 

Giant Springo Door Stop

Springo.stl

Springo Cactus Trichocereus

cactus-wflower.stl

Strawception Cup

This cup _really_ sucks! Straw and cup become one with the Strawception Cup.

---

I wasn't going to share this file since it's nearly impossible to clean and generally a bad idea, but people keep requesting it and I'm not your mom... so you do you :P

Printed at 100% infill with high flow to make it watertight. I used [MatterHackers Natural Translucent PRO Series PLA](https://bit.ly/NaturalPLA) so I would at least not get pigments with my microplastics.

helix

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Helix Spiral Table Lamp - Mid-Century Modern Desk Light

DNA Cookie Cutter STL File - 4 inches

Propeller for oxygen concentrator

Ad Rem Infinitum An Abstract Tulip Vase

Alpine Helix Vase – Modern Spiral Decorative Planter STL

Slime Ball Fidget Toy by Ruven Bals Print in Place

Large Helical Heart with Secret Compartment

Impossible Pass Helix 5 Pack

Sloppy Coiled Rope Bowls

Small Helical Heart

Small Banana Springo // Fruit Springos

Plain Seashell for Remixing

KROMATIK Pot 003

Pineapple Springo // Tasty Springos Pack No.1

helix · catchall bowl

Cube and helix, impossible passthrough illusion

Wavy Springo

Giant Springo Door Stop

Springo Cactus Trichocereus

Strawception Cup