Haunted House Shape Cutter & Stamp Set, Fondant & Cookie Decorating, Halloween Horror Theme, S/M/L Sizes PRODUCT_654

contour_stamp_medium.stl

Candle Candle holder /  no supports / 3mf included

Candle Candle holder.stl

Chibi Halloween STL File Drop ~

House.stl

Haunted House 2

STL Demo Placeholder (Use Master File Instead).STL

Magnetic Tiles Haunted House (PORCH LIGHT)

Porch Light Base.stl

Magnetic Tile Haunted House WINDOW BOARDS

X Window Board_1.stl

Magnetic Tile Haunted House RAILINGS, PILLARS, ARCHES & BEAMS

Right Porch Railing.stl

Magnetic Tile Haunted House: ROOF

Roof Corner Piece.stl

Magnetic Tiles Haunted House: DOORS

150x150 Front Door Wall.stl

Magnetic Tile Haunted House: WALLS

 150x150 Wall.stl

Magnetic Tile Haunted House Collection: FLOORS

150x150 floor with center magnets.stl

Haunted Dice Tower

haunted-dice-tower-3-1 (4).stl

Witch house window.stl

Witch house decoration that can be hung on your wall or stuck on your window or even just placed on a piece of furniture, it's up to you to choose the best place!

This model prints flat very easily.

**Print settings** : 

- 10% infill
- 0.3 mm layer height
- PLA Black from ArianePlast



All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


haunted house

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 1315 new models

Candle Candle holder / no supports / 3mf included

Chibi Halloween STL File Drop ~

View 12 new models

Magnetic Tiles Haunted House (PORCH LIGHT)

Magnetic Tile Haunted House WINDOW BOARDS

Magnetic Tile Haunted House RAILINGS, PILLARS, ARCHES & BEAMS

Magnetic Tile Haunted House: ROOF

Magnetic Tiles Haunted House: DOORS

Magnetic Tile Haunted House: WALLS

Magnetic Tile Haunted House Collection: FLOORS

View 62 new models

Witch house window.stl

Ghost Pop Beads

Skull Pop Beads

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

View 25 new models

Haunted House Coaster