Franken-Spine  - Articulated Snap-Flex Fidget (Loose Joints)

FrankenSpine_Loose_WithBody.stl

Mug Hand: Self-Adjusting Coaster

STL_hand_coaster_main.stl

Ring Lamp II with Halloween Panels

panel big-house.stl

Skeleton Coasters

skeleton-coasters.stl

Tentacle Magnets

Tentacle3.stl

Plague Doctor bust (Pre-Supported)

bust.stl

Skeleton Vase for Spooky Decor

Skeleton Vase.stl

Architected Skull (Hex Honeycomb)

This skull is part of a series that demonstrates three of the architecting features in nTopology software.

See here for video: https://youtu.be/ZX4rk4VM46U 

In this series, the Gyroid Triply Periodic Minimal Surface, Face Centered Cubic Lattice and Hexagonal Honeycomb unit cells have been applied to a conformal cell map derived from the outer surface of the skull. Using this technique allows the structures to follow the bone contours and converge on the front and back of the skull.

See here for other models in the series:


Articulated Pirate Skeleton Mini Figure

Skeleton.3mf

Samurai / Ninja Costume Kit for Halloween - 15 Props Included

nunchuck-handle-x2.stl

Draped Bust Rose (Pre Supported)

draped_bust_rose.stl

Pumpkin Pals - Jack O Lantern - Melty

melty.stl

Ghost Grogu

Ghost Baby Yoda.stl

Grim Reaper Note Holder 2

Reaper2.stl

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Webbed Egg

Webbed Egg Aligned.stl

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


halloween

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Franken-Spine - Articulated Snap-Flex Fidget (Loose Joints)

Mug Hand: Self-Adjusting Coaster

Ring Lamp II with Halloween Panels

Skeleton Coasters

Tentacle Magnets

Plague Doctor bust (Pre-Supported)

Skeleton Vase for Spooky Decor

Architected Skull (Hex Honeycomb)

Articulated Pirate Skeleton Mini Figure

Samurai / Ninja Costume Kit for Halloween - 15 Props Included

Draped Bust Rose (Pre Supported)

Pumpkin Pals - Jack O Lantern - Melty

Ghost Grogu

Grim Reaper Note Holder 2

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Webbed Egg

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

SHERLOCK GHOST - THE GHOST DETECTIVE

Alchemist Gas Mask -"Potion" (Sculptober Day1)

Midnight Meowster Black Cat