The original meaning of Easter is also important, but most people think of eggs and rabbits at Easter. And also, ordinary people think that small sharing with neighbors is a day that brings joy. I designed a rabbit piggy bank with these two things. You can also put coins in this piggy bank, but you can also put small snacks as a gift.
Even if it's not Easter, the piggy bank is still valid. Although there has been a lot less use of coins, there are still many places and areas where coins are used.
So I designed a rabbit piggy bank. Easy to fold, easy to insert and take out coins.

The size of the coin hole is designed to accommodate 25 cents of US coins. It is large enough to fit most national coins.

https://youtu.be/G-jtFxuM-Lc

I hope you will remember the preciousness of small money and the joy of sharing through this piggy bank.

Size, X 76mm, Y 124mm, Z 105mm

Design by GOODesign

Easter bunny bank(Foldable)

GOODesign_Foldable_Bunny_Bank.stl

In the past, my foldable designs explored a different side of 3D printing - instead of only thinking about rigid materials, I focused on flexibility and used elastic properties to create new structural ideas. Over time, those folding designs found their place and became something of their own category.

So I started looking for a new direction. This time, I pushed things further by fully embracing extremely soft materials.

That’s how the Squeaker Duck was born. 

This project came with two major challenges.

1. Printing very soft material in a controlled shape
Soft materials are tricky. Because they’re flexible, they can get dragged by the nozzle during printing or curl as they cool. To solve this, I designed an internal structure that helps the form hold its shape during the printing process.

However, that same structure made the duck harder to squeeze - which is a big problem for something that’s supposed to make a squeaking sound when pressed.

In the end, I developed a form that stays stable during printing but becomes very easy to deform once the print is finished.

2. Designing an effective squeaker
I had made squeaker mechanisms before, but they required a large airflow and were very small, which made them difficult to print unless you had a highly precise 3D printer.

So I redesigned the squeaker to

Produce sound with a much smaller airflow
Be large enough to print reliably, even on less specialized printers

Printing Guidelines
To successfully print the Squeaker Duck, please keep the following in mind:

1. Use TPU 95A filament.
64D is not soft enough and may not compress well. If you use other flexible filaments, make sure they are truly soft and elastic.

2. Check your slicer settings for flexible filament.
Incorrect settings can lead to poor print quality. While settings vary by brand, key factors are:
Very slow print speeds
Nozzle temperatures around 220 - 230

3. Be careful when printing the squeaker reed.
The reed is very thin and may not print well on textured beds. When removing it from the bed, take care not to bend or warp it, as this can affect the sound quality.

4. Pay attention to the reed’s orientation during assembly.
Insert it carefully in the correct direction, and use a tool to gently push it fully into place.

For more detailed instructions, please check the video guide.

I hope this new challenge in my 3D printing journey brings a fresh wave of creative exploration!

Largest part in printing, size = X 63mm, Y 84mm, Z 102mm, After full assembly size = X 63mm, Y 91mm, Z 102mm

Total Build Time : 15h / Plastic Weight : 40g

Squeaker_Duck_rubber_toy

GOODesign_Squeaker_Duck.stl

There are a lot of requests for eggs at Easter, but I thought this was a bit boring, so last Easter I designed dragon eggs. However, there was a surprising response.
Dragon egg STL -

So this time, to celebrate Easter, I designed an egg of an alien to make a little more distinctive egg.

Above all, we did our best to design it to look as gross as possible.

Designed with a simple folding structure, very easy to make. By securing the maximum space inside, you can put simple snacks, candies, or jellies in it as a gift.

In the movie Alien, the whole is covered with sticky liquid, and Silky filament seems suitable to express this.

https://youtu.be/BSFoOcy2Vog

We hope you have a very special Easter with these alien eggs.

Largest part in printing, size = X 158mm, Y 158mm, Z 17mm, After full assembly size= X 91mm, Y 86mm, Z 94mm

Total Build Time : 18h 15m / Plastic Weight : 83g
Design by GOODesign

Alien Ovomorph(egg) - Foldable

GOODesign_Foldable_Alien_Ovomorph.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

To complete the Futurama series, I finally designed the Planet Express spaceship. I put my best effort into making the design as suitable as possible for 3D printing. I tried to faithfully recreate the appearance seen in the cartoon, and I also gave a lot of thought to replicating as many moving parts as possible. For example, the boarding stairs at the front can fold and unfold, the hangar can open and close, and of course, the turret on top rotates.

In addition, to enhance the sense of realism, I added my own imagination by engraving panel lines similar to those I’ve used in the other spaceships I’ve designed.

The printing and assembly process is very simple, but there are a few things you need to pay attention to:

When attaching the turret to the main body, you should apply glue only around the edges so that the turret can rotate later. This detail isn’t clearly shown in the video, so please keep it in mind.
When attaching the folding stairs at the front, make sure to align the pegs and holes properly before inserting them.
When attaching the outer wall of the hangar (the light green part), make sure to check the direction of the parting line. You can see this in the video.
The rings and wings of the horizontal stabilizers on both sides won’t fit if they’re misaligned, so please test-fit them first before gluing. Once you’ve confirmed the alignment, then attach them permanently.
The logo on the vertical tail has circle and triangle markings engraved on the base, so just align those markings when attaching it.
The landing gear covers are marked with the letters R and L for right and left, and you just need to insert them with the letters facing inward.

For more details, please refer to the video. https://youtu.be/Jqm8zHlQoqY

Complete your Futurama series with this Planet Express spaceship!

Head quarter download link - 

Filament color :
Esun silky silver PLA - windows, landing gears, engine etc...
Color fabb Leaf green PLA - wings, canopy frame
Esun Peak green PLA - body, stair frame
Esun Red PLA - Center line
(Brand unknown)Dark grey PLA - Engine booster, stair, canon, cargo frame
Esun white - frame of logo

Largest part in printing, size = X 51mm, Y 48mm, Z 90mm, After full assembly size= X 90mm, Y m254m, Z 83mm

Total Build Time : 14h / Plastic Weight : 146g

Planet Express Ship - FUTURAMA

GOODesign_Hull_Rear.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/c/goodesign

This is a Display Stand for the F-5E that I designed.

Of course, airplanes can be fully displayed and appreciated only with this display stand.

Like the previously designed Display Stand, there is a drawer to store the landing gear.

And you can also change the angle left and right.

Of course, you can connect this Display Stand even while armed.

Please check the video for details.
https://youtu.be/tMpIqwjbyXk?si=bto-8yNw-ZD9R322

I hope you can display and enjoy the F-5E I designed with this Display Stand.

This design does not include the F-5E fighter. For the F-5E fighter, please see the link below!
Download F-5E - https://than.gs/m/1492963

F-5E Display Stand

GOODesign_F-5E_STAND.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

The F-5E, which I designed this time, was developed as a low-maintenance aircraft and was operated in many countries for a long time. That's why it's a fairly popular airplane. In particular, it appeared as the aircraft used by the main character in the Japanese animation Area 88, proving its popularity.

It's very easy to make, but there are a few caveats.
1. Be sure to remove the support first.
2. To balance the aircraft, AAA batteries to act as weights can be placed under the cockpit. However, for those who are concerned about battery fluid leaking out after a long period of time, we have attached an STL in the shape of an AAA battery, so you can print this and insert it. but. When you want to print and use it, you must print it with 100% infill to act as a weight.
3. The nose radome must be attached to the fuselage with the arrow pointing upward.
4. When assembling the fuselage and wings, pay attention to the shapes of the projections and grooves, align them, and push the wings all the way to the front of the fuselage, then insert the rear part of the fuselage.
5. The flap and aileron hinge at the rear of the main wing must be installed with the center protrusion facing outward. Please check carefully.
6. When installing a horizontal tail wing, you must first insert the hinge part into the wing and then insert the wing into the fuselage.
7. When installing the tire parts of the front landing gear, you must spread the tire parts with force before inserting them. The landing gear is thin and easily broken, so be careful when applying force.

Please check and refer to the video for detailed process.
https://youtu.be/3oaY3Xa5XRc?si=ivuq5sdR4jst86SF

As with other military airplanes, we plan to design an armament set and stand. We hope to receive a lot of response from you all.
Download Display stand - https://than.gs/m/1492964

F-5E Tiger II

GOODesign_F-5E_Tiger-ii_Fuselage.stl

The foldable snowman, gingerbread man, girl and Santa are getting very good response from customers. In the meantime, many customers asked us to make a gingerbread snowman. So I made it again.

At first, I tried to make a snowman with two snowballs, but to make a difference, I made a snowman made of three snowballs.

There is a hole in the head to attach a ribbon or string for decoration. I also make a hole in my hat so you can attach a ribbon or string after you put it on.

It's a good idea to use brown filaments because the gingerbread is a motif, but painting with white filaments can also give very good results.

print with Prusa - https://youtu.be/Z-SCBBQ7jLk

Happy New Year and Merry Christmas!

Designed by GOODesign.

size = X 103mm, Y 109mm, Z 27mm

Gingerbread 3-Stacked Snowman

GOODesign_GingerbreadSnowman.stl

I added Santa Claus as a movable gingerbread series. This time it changed from the previous movable gingerbread(gingerbread man and girl).

Many modifications were necessary to express Santa's fat body.
It was very difficult to adjust the angle so that the beard did not touch the body.
Changed the direction of rotation of the arms to allow a more natural pose.
The detachable hat is designed to fit into other movable gingerbread. Santa hats must be glued to prevent them from falling out.
Print with Prusa - https://youtu.be/NAgWC0RBjtg
Print with Ender3 pro - https://youtu.be/AdZj5bWZWq4

We wish you a Merry Christmas with this gingerbread Santa Claus.
Merry Christmas ~

size = X 69mm, Y97mm, Z 24mm

Design by GOODesign

Movable gingerbread Santa Claus

GOODesign_Movable Gingerbread Santa Claus.stl

Get commercial license and download newest models cheaply-   https://www.patreon.com/c/goodesign/

The foldable Jack-O-Lantern's new opening and closing structure offers fresh fun and is gaining popularity.
Utilizing this structure, I designed a Christmas decoration this time.

The very challenging thing about this design is that we redesigned the dividing structure diagonally. Splitting it vertically isn't too much of a problem for Christmas decorations, but I thought that dividing it diagonally would be much more original and beautiful.
The design process was very difficult, but the result of this design is amazing!

This design can be used as a Christmas decoration when folded, but when unfolded, the interior space can be utilized.
You can also gift them by placing your kids favorite treats like candies and chocolates inside this Christmas ornament.
You could even play a treasure hunt-like game by mixing nothing and stuff with treats and hanging them on the tree.

The part that opens and closes is marked, so please open and close with that part.

Printing on Prusa 3D printer video - https://youtu.be/9cZjLDtNSB0?si=GIUAa9RkxZRLrmpf

We wish you a Merry Christmas with this Foldable Christmas ornament.
merry christmas!

Largest part in printing, size = X 204mm, Y 89mm, Z 25mm, After full assembly size= X 70mm, Y 70mm, Z 84mm

Total Build Time : 15h 15m / Plastic Weight : 57g
Design by GOODesign

Foldable Christmas ornament - Diagonal

GOODesign_Foldable_Christmas_Ornament_Diagonal_Body_Brim.stl

Get commercial license and download newest models cheaply-   https://www.patreon.com/c/goodesign/

There are two main types of snowmen, one made of two snowballs, and the other one made of three snowballs.
A snowman made of two snowballs that I previously designed was loved a lot, so I designed a snowman made of three snowballs for this Christmas.

These three snowballed snowmen can rotate in each of the three parts of the head and body. The two arms can also move in different angles. You can also decorate the Christmas tree by attaching strings to the rings on the back.

When making the torso folded, the button must be inserted first.
When inserting a button, make sure to check the shape carefully. The same goes for the nose.
When inserting the shawl, apply a little force and open it to fit well.
Be sure to check out the video!

It goes well with the previously made snowman.
We wish you a happy Christmas.

Print and fold video with Prusa - https://youtu.be/ZHfN4GfirE0
Print and fold video with Ender 3 - https://youtu.be/wqn4tUSfAoI

Size, when all parts are fitted X 130mm, Y 64mm, Z 140mm



Foldable 3 Stacked Snowman

GOODesign_Body.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

My newly designed Bender Bending Rodriguez robot, which uses aluminum wire, is of course a model that showcases the full extent of my 3D printing design skills — and I’m really proud of it. However, I still believe that the original Foldable Bender robot, which focused on the folding mechanism, is also a fun and well-designed model in its own right.

That’s why so many people who love this design have sent me numerous requests for improvements. But I hadn’t been able to respond to those requests until now, as I was focused on developing new items.

So finally, I’ve redesigned and released Version 2.0 of the Foldable Bender robot, incorporating the improvements that have been requested over time. I apologize to all the makers out there for the long wait, and thank you for your patience.

Here are the improvements I made in Version 2.0:

The eyes and mouth are now separated by color, and I've added a swappable face system to allow for multiple expressions.
Added supports to the arms and legs to prevent them from falling over during printing.
The logo has been downsized for a cleaner look, and the mounting hole for the rocket booster on the back has been removed.

Here are some important notes to keep in mind during printing and assembly:

Be sure to remove the added supports completely after printing.
The legs can move forward and backward, but depending on the position of the arms, whether the cigar is in the mouth, or if the hands are holding a bottle or gun, it might be difficult to balance the figure properly.
After folding the torso, if it doesn’t stay securely in place, feel free to use glue to hold it together.

print and folding video - https://youtu.be/wBfImMUyfJA

I hope you enjoy this newly reborn version of one of my signature Foldable designs!

Largest part in printing, Size = X 124mm, Y 123mm, Z 68mm, After full assembly Size= X 98mm, Y 45mm, Z 152mm

Total Build Time : 17h 30m / Plastic Weight : 65g

Foldable Robot-Bender Ver2.0

GOODesign_Foldable_Robot-BD_Ver2.0_Body.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign

The previously made excavator has gained great popularity from customers. So I wanted to design more heavy equipment, so I designed the skid loader this time. Again, all movements have been reproduced.

The making process is as follows.

Fold the lower body and fit the tire.
Sliding the engine through it, then inserting it into the cockpit.
Glue the grate windows.
Pull the cylinder of the lift arm until it clicks into place.
Rotate the piston and fit it into the lift arm. And put this piston in the cylinder.
Connect the safety tread between the lift arms.
Connect the bucket to the lift arm.
Connect the lower body to the lift arm and connect the cockpit + engine parts to complete.
https://youtu.be/UbvlE84jyaQ

We hope you love this skid loader a lot, and look forward to the heavy equipment that will be introduced in the future!

1: 35 Scale

Largest part in printing, size = X 42mm, Y 102mm, Z 24mm, After full assembly size= X 52mm, Y 100mm, Z 57mm

Skid loader (Print-in-place Articulated)

GOODesign_Cockpit.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
I lived with many animals in our youth. I played with observing the appearance and movement of animals, and also became a material for manga and made toys. And it later became the source of inspiration for me. The object of this folding design is an insect, a stag beetle characterized by its beautiful horns.

This stag beetle has a structure in which many parts of the six-footed insects move. I have undergone many trial and error to implement this move, and I have finally completed it.

The first is designed to move the bark that covers the wings. I put a protrusion on the end to fix it well. The second time I had a nice horn to move. Third, the legs do not move, but they are designed to hold well in good posture.

The cautions in the folding process are that you must put the legs in the body first and then proceed with the rest. And another thing to note is that the horn can fall off the molding plate during the printing process, so use Raft in that case.

Folding process with Ender 3 pro - https://youtu.be/43eUQa6UoEA?si=m_dSYEtHkJa6ANvT
Printing review from ido n - https://youtu.be/F6cfAyyatV0?si=auwWmKYkX1ALCJYv
Printing review from 3DWorkshop - https://youtu.be/QvimY-YWuOs?si=hhuT-YOJubAh2EM9

Various animals with exoskeletons have inspired mankind. Not only the structure of the animal, but also the shape, inspired many products. Foldable design has tremendous potential for design and manufacturing. To maximize this possibility, it is necessary to apply foldable designs to animals with exoskeletons. This foldable stag beetle will open up another possibility of folding design.

With this foldable stag beetle, enjoy your fun 3D printing by recalling the memories you had with insects as a child.

When expanded, size = X 160mm, Y 92mm, Z 61mm After folding X 148mm, Y 96mm, Z 29mm

Foldable Stag Beetle - Flexi

GOODesign_Foldable Stag Bettle.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
It is the tenth series of foldable robots to prepare for 4D printing. The robot was designed inspired by the robot that appeared in the British drama (1981), a novel based on one called "The Hitchhiker's Guide to the Galaxy."
This product focuses on the reinterpretation of the original form in a modern way and the production of a new proportion.

This is the kind of "3D Fan art". My imagination has been added so it is difficult to see the original shape before folding it.

Designed for easy folding of complex structures, this product has been designed to meet the needs of popular 4D printing in the future.
It will revolutionize 3D printing as a totally new structure robot that does not need to be supported nor assembled, just fold.
This design does not require assembly, but the head, arms, legs etc, can rotate at various angles, so you can play with a variety of things.
The folded part is made concave so that anyone can fold it easily.

※ Do not use filament manufactured by fillamentum. The filament is hard and breaks well in the process of folding the robot. ※

Folding process - https://youtu.be/tgMktRtCJBU?si=sAjqLhGIp0xe-yK4
Print with silky silver using LUGO 3D printer - https://youtu.be/mtteuyNcNMc?si=4BY7_zpI_SnvspWc

When expanded, size = X 107mm, Y 141mm, Z 60mm After folding X 65mm, Y 45mm, Z 132mm



Foldable robot Marvin 1981

Fab365_Robot-MV.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
I previously designed Marvin as a Foldable robot in the classic SF TV series .

Download TV series Marvin -

This design was loved by 3D printing users. So this time, I designed the 2005 movie version design by foldable it.

The feature of this movie version design is that the head is too large, which makes it difficult to move freely. However, after many modifications, I succeeded in linking everything together. The head can rotate and the arm can move in multiple directions. However, the legs do not move to support the large head.

How to fold is as follows.
1. Move your head forward.
2. Place one upper body between the head and lower body.
At this time, it should be fitted to the frame connecting the head and the lower body.
3. Fit the other half of the upper body.

※ The arm may fall off the bed during printing, so it is recommended to pay attention to the adhesion of the bed or use a Raft. ※

https://youtu.be/6UwkNZ9q_fQ
https://youtu.be/w9kXFp1-W6g
https://youtu.be/bGvxlMJNHdU
https://youtu.be/1_T5H5tzG5Q
https://youtu.be/o4UK5U3yNR4?si=6n6Vjmds7cUBfVnC

When expanded, size = X 114mm, Y 91mm, Z 56mm After folding X 120mm, Y 58mm, Z 120mm



Foldable robot Marvin 2005 from Hitchhiker's Guide

Fab365_Foldable_Robot - MV 2005.stl

Get commercial license and download newest models cheaply- https://www.patreon.com/goodesign
While designing many folding cars, I thought a lot about what would express the new structure as the next step. Then I came up with the idea of implementing a steering system. And I came to the idea of making this steering system easier to see. I thought of an F-1 racing car that was suitable for this, but it was too difficult.
So, choosing a simpler design, I found the Caterham Super 7.
And after trying in various ways, I realized a steering system that does not require assembly!!!

Another challenge is designing the parts to be separated and printed according to the color. Even if there are still few printers capable of multi-color printing, setting is difficult. That's why I designed it so that you can enjoy the result of combining various colors with a printer that prints in one color.

The folding sequence is a bit complicated. Please be sure to refer to the video~
1. Insert the rear wheel into the body.
2. Fit all tires.
3. Connect the tie rod to the opposite wheel.
4. Connect the front body as if wrapping it from the top to the bottom of the steering system. And press it up and down to connect it tightly.
5. Glue the rear wheel cover to the rear body. And connect this rear body to the back of the main frame.
6. Fit the front wheel cover to the hole in the steering system. This front wheel cover serves to securely fix the tie rod.
7. Insert the rest of the parts (head lamp, steering wheel, windshield, muffler, soft top, etc.) to complete.

https://youtu.be/uCpGgSqG3Pc
https://youtu.be/fZ5DxL13gLA

Size, when all parts are fitted X 68mm, Y 133mm, Z 46mm

Foldable Caterham Super 7

GOODesign_Main_Frame.stl

Get commercial license and download newest models- https://www.patreon.com/goodesign
With the request and high vote from FAB365.net's request page, I designed this foldable Willis Jeep.

Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it.
This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well.

The folding process is as follows.
1. Rotate the front part of the jeep and turn it over.
2. Connect the lower body to the upper body.
3. Close the hood and move the windshield forward and tilt it back.
4. Press and fit each of the four wheels.
5. Put the fuel tank base on the back and put the fuel tank on top.
6. Attach the spare tire to the rear of the vehicle.
7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat.

Check youtube videos about folding process below.

1 : 32 scale
When expanded, size = X 73mm, Y 104mm, Z 37mm After folding X 50mm, Y 108mm, Z 52mm

Foldable Willys MB Jeep

GOODesign_Jeep Body.stl

One of the indispensable items for Christmas is a house made of cookies. I thought it would go well with the ginger bread people I made before, so I made it this time.

Putting an LED candlelight through the roof will help create a Christmas atmosphere.

Caution! You should never add real candles.

LED candles generate little heat, so there is no problem. Use only LED candles.

Print and fold video- https://youtu.be/nzIMBGHdzIU

When expanded, Fence size = X 41mm, Y 41mm, Z 10mm / Base size = X 110mm, Y 146mm, Z 7mm / Wall size = X 99mm, Y 123mm, Z 83mm / Roof size = X 158mm, Y 130mm, Z 51mm, After folding X 110mm, Y 149mm, Z 115mm



Foldable_Cookie_House

GOODesign_Cookie_House_Wall.stl

To make Gingerbread Man not lonely, his couple Gingerbread Girl has been added. Print this Gingerbread Girl together so that Gingerbread Man is not lonely!

One of the things that reminds me of Christmas is the gingerbread man. These cookies, shaped like a person, are featured in animations and are very popular with people. I created this design with the idea that this gingerbread man could move or stand.

This gingerbread man has its head, arms and legs rotated, and can even stand with its legs spread back and forth.
The bow tie can be printed separately and glued.

There are holes in the head, so you can even put a string or ribbon to decorate the Christmas tree.

Printing and play Prusa i3 mk3 - https://youtu.be/6WydQWmBaX4
Printing and review from greg - https://youtu.be/2EnBFVgeEz0

size = X 76mm, Y 97mm, Z 19mm

goodesign

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Easter bunny bank(Foldable)

Squeaker_Duck_rubber_toy

Alien Ovomorph(egg) - Foldable

Planet Express Ship - FUTURAMA

F-5E Display Stand

F-5E Tiger II

Gingerbread 3-Stacked Snowman

Movable gingerbread Santa Claus

Foldable Christmas ornament - Diagonal

Foldable 3 Stacked Snowman

Foldable Robot-Bender Ver2.0

Skid loader (Print-in-place Articulated)

Foldable Stag Beetle - Flexi

Foldable robot Marvin 1981

Foldable robot Marvin 2005 from Hitchhiker's Guide

Foldable Caterham Super 7

Foldable Willys MB Jeep

Foldable_Cookie_House

Gingerbread_girl