PrintABlok Flexi Block

178b Flexi Blok B.stl

Pentagon Springo

This five-sided Springo behaves a bit differently! For best results, print at .15mm layer height with 100% infill. Prints without supports, just carefully pry the coil apart with a palette knife, butter knife or something similar after printing!

[Relevant Video](https://www.youtube.com/watch?v=HgY7ovYWplg)



68 Key Cover // Embedded Print

[Process Video](https://www.youtube.com/watch?v=ABUVz4zIPfo)

A key cover made for the 68 (Schlage, SC1, C) type key. The key is embedded into the print by pausing at 3.4mm and, if necessary, moving the extruder out of the way, to place the key inside the print. Optionally, you can also do a filament change at 4.8 mm to introduce a second color for the top pattern.

---

Pause at Z height 3.4mm to embed key, and at 4.8mm to change colors.

If the layer isn't clean above the key, increase infill/bridging overlap in your slicer, or dry a coat of hairspray on the key.

Compliant Stand Clips

standclipwide.stl

Sausage Link Chain - Articulated Fidget Model

sausage_top.stl

Flexy Banana

A silly little print of a Flexible Banana. It's a great fidget toy.

No need for support while printing.

Prints in PLA with no problems, but I assume PETG should give the gecko an even more flexible.

Be aware that you need to have a pretty well-tuned printer to pull this off.

Have fun with your super flexi banana!

Creative Commons (4.0 International License)
Attribution-ShareAlike
: [https://creativecommons.org/licenses/by-sa/4.0/](https://creativecommons.org/licenses/by-sa/4.0/)

Flexi Extruder Toy

Extruder Toy Nozzle.STL

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

articulated moon.stl

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]

2X Top & Bottom TPU Ring.stl

Hot Dog Pal

Hot Dog Pal Bun.STL

Door stop

**A door stop that you can hang on the door handle when you do not need it without blocking the lock.**
It is flexible and locks under the door when you push it down with your foot.

Size: 20 x 40 (height) x 120 mm
This is the V2
Don’t forget to post your makes!

**Print settings**
Required build volume: 20 x 40 x 120 mm
Material usage: 11g
Print time: 1h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0,28 mm
Outer walls: 3
Infill: 30% - or more if you want it to be less flexible
Build plate adhesion type: none, if you have bed bad adhesion then a brim 
If you experience any problems, please feel free to contact me on twitter or Instagram

Flexi Heart

This 3D printable model is a Flexi Heart that has flexible points. It’s a sweet and fun toy that you can squeeze and shape in different ways. You can use it as a decoration, a stress reliever, or a gift for someone you love.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

The size of the model is 50 x 50 x 5.5 mm and it prints in about 20 minutes at 60 mm/s. This Flexi Heart is a great way to express your feelings and make someone happy. It will warm your heart every time you see it or play with it. Download it today and share the love!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Star

This 3D printable model is a Flexi Star that has flexible points. It’s a cute and fun toy that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone special.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

The size of the model is 50 x 50 x 5.5 mm and it prints in about 20 minutes at 60 mm/s. This Flexi Star is a great way to add some sparkle and joy to your day. It will make you smile every time you see it or play with it. Download it today and make your own wish!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Batman Begins

This 3D printable model is inspired by the logo of Batman Begins, the first film in the Dark Knight trilogy. It features a flexible bat symbol that can move its wings up and down. It’s a cool and fun toy for the fans of Batman and his adventures.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. If you want strong hinges use 3 perimeters. The recommended material is PLA, but you can experiment with other filaments as well.

The size of the model is 150 x 50 x 5.5 mm and it prints in about 1h minutes at 60 mm/s. This Flexi Batman Begins Logo is a great way to show your love for the caped crusader. It will add a touch of action and excitement to your desk or shelf. Download it today and unleash your inner hero!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By purchasing, YOU HAVE NO RIGHT the right to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Spray can straw holder

Articulated Alligator

Alligator_v2_curl.stl

Flexi Coasters

Flexi Coaster.stl

Articulated Sausage Dog Keychain - Different Lengths Available

FOR_DISPLAY_ONLY_sausage_dog_keychain.stl

Turkey Legs

Turkey Legs.STEP

Turkey Flexi Leg

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpts By @ChelsC423***

***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***

***If you would like to support us and receive exclusive to Patron models every month check us out here:
https://www.patreon.com/chelscct***

flexible

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

PrintABlok Flexi Block

View 66 new models

View 111 new models

View 72 new models

View 10 new models

Flexy Banana

Flexi Extruder Toy

Three Wolf Moon - Articulated Flexi Moon & Wolves (print in place) | Meme

Protective Case [Compatible with Samsung 20 000mAh Battery Pack]

Hot Dog Pal

View 31 new models

Flexi Heart

Flexi Star

Flexi Batman Begins

View 10 new models

View 27 new models

Flexi Coasters

Articulated Sausage Dog Keychain - Different Lengths Available

Turkey Legs

Turkey Flexi Leg