Articulated Rattlesnake | Pre-Painted + Optional 8mm Glass Eye Version

rattle snake.stl

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Loose Tolerance Extra Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Medium** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Loose Tolerance Long Bony Basilisk:**
Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Mini Articulated Dragon 01

Printzee_MiniDragon01_1Color_PrintInPlace.3mf

Chinese Puzzle Ball (Plain)

Chinese Puzzle Ball Plain Loose.stl

Squeak Articulated Dragon Print-in-Place Mesh Mayhem

Squeak Articulated Dragon Mesh Mayhem.3mf

Crystal Dragon

Cinderwing3D CrystalDragon_NewLegs_ShortTail_Curled_Colors.3mf

Tiny Butterfly Dragon

TinyButterflyDragon_ColorAlt.3mf

Tiny Heart T-Rex

Cinderwing3D Tiny Heart T-Rex Colors 2.3mf

Flying Serpent 2025

Cinderwing3D Flying Serpent 2025.stl

Tiny Rose Dragon and Wyvern 2025 Edition

Cinderwing3D Tiny Rose Dragon Colors.3mf

Tiny Donut Spider

Cinderwing3D Tiny Spider Donut Color.3mf

Baby Mushroom Dragon

Cinderwing3D_BABY_MushroomDragon.3mf

SKEWBITS (v1) Puzzle Game for 3D Printing *OUTDATED*

Grid.stl

Cookie Heart Dragon

Cinderwing3D Cookie Heart Dragon Colors.3mf

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Loose Joints)

BabyBasilisk_V2_ExtraLong_Loose.stl

Bamboo Dragon Cinderwing3D X BambuLab

Cinderwing3D BambooDragon.stl

Filamentius Mesh Mayhem Dragon.stl

Baby Peacock Dragon

Cinderwing3D Baby Peacock Winged Color Eyes.3mf

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Medium Tightness Joints)

HappyLilSleigh_MediumTightness.stl

fidget

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated Rattlesnake | Pre-Painted + Optional 8mm Glass Eye Version

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Long Bony Basilisk - Articulated Snap-Flex Fidget (Medium Joints)

Mini Articulated Dragon 01

Chinese Puzzle Ball (Plain)

Squeak Articulated Dragon Print-in-Place Mesh Mayhem

Crystal Dragon

Tiny Butterfly Dragon

Tiny Heart T-Rex

Flying Serpent 2025

Tiny Rose Dragon and Wyvern 2025 Edition

Tiny Donut Spider

Baby Mushroom Dragon

SKEWBITS (v1) Puzzle Game for 3D Printing OUTDATED

Cookie Heart Dragon

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Loose Joints)

Bamboo Dragon Cinderwing3D X BambuLab

Filamentius Mesh Mayhem Dragon.stl

Baby Peacock Dragon

Happy Lil Reindeer & Sleigh - Articulated Snap-Flex Fidget (Medium Tightness Joints)