Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Loose* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek Eyed Bone Snake: https://than.gs/m/933820

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Sleek-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the *Medium* tolerance model.  For the other tolerances, please check out the other versions of the model below:

Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: https://than.gs/m/933819
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


 Sleek-Eyed Bone Snake (Medium) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

To unlock a jaw-dropping good time after printing, pinch the sides of the Round-Eyed Bone Snake's jaws together until they click and free up its cute little maw.

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Round-Eyed Bone Snake, be sure to check out it’s sibling Sleek-Eyed Bone Snake:
Tight Tolerance Sleek-Eyed Bone Snake: https://than.gs/m/933810
Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Round-Eyed Bone Snake - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget 

**Print-In-Place, No Supports, Articulating Fidget Toy**

Slithering straight from the catacombs just in time for Halloween, this Bone Snake aspires to be the spine-chilling superstar of serpents! With its skeletal allure, it's more than ready to coil up and become the eerie centerpiece of your haunted decor or strike a ghoulish pose for you and your friends.  This little one can't sit back and watch the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This versatile, articulated fidget toy features the Mimetics 3D “Snap-Flex” joint, enabling each body segment to move fluidly OR lock into a fixed position for an optimized fidget experience.  The sound of the *SNAP* provides pleasing auditory and tactile feedback that you're doing something right.  

This Bone Snake is the second creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.
This is the Tight tolerance model.  For the other tolerances, please check out the other versions of the model below:

Medium Tolerance Sleek-Eyed Bone Snake: Coming Soon
Loose Tolerance Sleek Eyed Bone Snake: Coming Soon

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Sleek-Eyed Bone Snake, be sure to check out it’s sibling Round-Eyed Bone Snake:
Tight Tolerance Round-Eyed Bone Snake: Coming Soon
Medium Tolerance Round-Eyed Bone Snake: Coming Soon
Loose Tolerance Round-Eyed Bone Snake: Coming Soon


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.


**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.


Sleek-Eyed Bone Snake - Articulated Snap-Flex Fidget 

Flying Fidgets - Trump! (AMS Painted file included)

Flying Fidget - Trump.3mf

Shutter Fidget Remix - No Rotation Top

This remix to the [Shutter Fidget](https://thangs.com/file/908530) provides an alternate top frame that will **not** rotate independently from the bottom frame.

Use this top if you want only the central shutter to move.

This file is compatible with the rest of the [Shutter Fidget](https://thangs.com/file/908530) project and [custom shutters](914592)

[Intro](https://youtu.be/W6o0j-xrIEU)


**Can I sell copies of this?**

Yes! This project was shared under the [Creative Commons - Attribution](https://creativecommons.org/licenses/by/4.0/) license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

[Click here for attribution examples](https://wiki.creativecommons.org/wiki/best_practices_for_attribution)


Cute Ghost Fidget

Final Ghost Keychain.stl

Baby Basilisk (Short) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the unique Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.

Be sure to check back regularly for more exciting Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use.
If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Baby Basilisk (Long) - Articulated Snap-Flex Fidget 

This baby basilisk just can't wait to be king of the serpents.  Until then, he's content to lounge about and strike a pose for you and your friends.

This flexible, articulated fidget toy incorporates the Mimetics 3D Snap-Flex joint, allowing each body segment to wiggle freely OR snap into a fixed position to maximize your fidget experience.

This Baby Basilisk is the first in a line of Snap-Flex models by Mimetics 3D, and is available for free for a limited time.  

Stick around for more fun Snap-Flex models in the future.  I'd love to hear your feedback and how we can improve this model together moving forward.

This model is only available for personal use. 
 If you would like to sell physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

Hexagon Magnetic Fidget Toy

hexagon rings.stl

Octagon Star Concentric Fidget toy - Torture Test

ring hoops concentric.stl

Flying Saucer Fidget Spinner

saucer.stl

Sausage Link Chain - Articulated Fidget Model

sausage_top.stl

Chinese Puzzle Ball (Plain)

Chinese Puzzle Ball Plain Loose.stl

V2 trainer buttefly knife

Flexi Batman Arkham City 🦇

This 3D printable model is a Flexi Batman Arkham City / Asylum that has a flexible base of the Batman logo and the letters Batman on top. It’s a cool and fun accessory that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the Arkham games.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is designed to print in two colors for the base and the letters. It has a stunning and striking design that matches the logo of Batman Arkham City / Asylum, the acclaimed video games that feature Batman’s adventures in Gotham’s most notorious prison and city district. This Flexi Batman Arkham City / Asylum 3D Printable Model is a great way to show your appreciation for the Dark Knight and his cinematic games. Download it today and be the hero Gotham deserves!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Musical Notes #JuneTunes 🎵

This 3D printable model is a Flexi Music Notes that has a flexible beam notes symbol. It’s a creative and fun accessory that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves music.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is print-in-place and does not need any assembly. It has a beam notes symbol that represents a group of eighth notes or shorter connected by a horizontal line. This Flexi Music Notes is a great way to express your musical passion and talent. Download it today and make some noise!

If you like this model, please leave a comment and a rating. Thank you! 😊

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Musical Notes

Flexi Batman v Superman Dawn of Justice

Who will you choose: the Dark Knight or the Man of Steel?

This 3D printable model is a Flexi Batman v Superman Dawn of Justice that has a flexible bat symbol with a superman logo inside. It’s a cool and fun accessory that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who loves the epic clash of these two heroes.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is designed to print in two colors, the Batman logo in a dark color and the Superman logo in red. It has a stunning and striking design that matches the logo of Batman v Superman: Dawn of Justice, the blockbuster movie that brought these two icons together on the big screen. This Flexi Batman v Superman Dawn of Justice is a great way to show your allegiance and passion for these legendary characters. Download it today and join the ultimate battle!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Circle Keychain

This 3D printable model is a Flexi Circle Keychain that has flexible segments. It’s a simple and fun accessory that you can attach to your keys, bag, or backpack. You can bend and twist it in different ways to show your style or mood.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is print-in-place and does not need any assembly. It has a smooth and circular design that will fit any style and mood. This Flexi Circle Keychain is a great way to personalize your belongings and make them more fun. It will make you smile every time you use it or look at it. Download it today and enjoy the endless possibilities!

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [@Frikarte3D](https://www.instagram.com/frikarte3d/)

If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Circle

This 3D printable model is a Flexi Circle that has flexible segments. It’s a simple and fun toy that you can bend and twist in different ways. You can use it as a decoration, a fidget toy, or a gift for someone who likes geometry.

This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.

This model is print-in-place and does not need any assembly. It has a smooth and circular design that will fit any style and mood. This Flexi Circle is a great way to relax and have some fun. It will make you happy every time you see it or play with it. Download it today and enjoy the endless possibilities!

fidget toy

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Sleek-Eyed Bone Snake (Loose) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Medium Tightness) - Articulated Snap-Flex Fidget

Round-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Sleek-Eyed Bone Snake (Tight) - Articulated Snap-Flex Fidget

Flying Fidgets - Trump! (AMS Painted file included)

Shutter Fidget Remix - No Rotation Top

Cute Ghost Fidget

Baby Basilisk (Short) - Articulated Snap-Flex Fidget

Baby Basilisk (Long) - Articulated Snap-Flex Fidget

Hexagon Magnetic Fidget Toy

View 16 new models

View 12 new models

View 10 new models

Chinese Puzzle Ball (Plain)

V2 trainer buttefly knife

Flexi Batman Arkham City 🦇

Flexi Musical Notes #JuneTunes 🎵

Flexi Batman v Superman Dawn of Justice

Flexi Circle Keychain

Flexi Circle