Don't Blink (Dr. Who) - Hueforge Print

Dont Blink.3mf

Modern Marvels - November 2023 Police Call Box

Police_Call_Box.stl

Tardis in Space - Hueforge Hybrid Print

A wibbly wobbly timey wimey model for all the Whovians out here! 

 

This is another Hueforge Hybrid print, where the Tardis ‘pops out’ of the print for a little personality. This print combines Hueforge filament painting methods with traditional 3D printing to create a lovely pop art style print. 

 

**Note: **If you are using the 3MF for one click printing, all settings will have been applied to the model. I used 5 filaments for this on one AMS and swapped one spool out of the AMS when the colour was finished printing for the 5th colour. 

 
**Note 2:** This print also has steep overhangs with no supports. If you're not confident in your printer handling supports with my 3MF file settings, do not use the one-click printing function and import the 3MF file into your slicer and adjust the settings for the ‘Tardis_Export3.STL’ part of the assembly to suit your own supports/overhang settings. 

 

If you are not using the one-click 3MF, the print instructions and recommendations are as follows:

1. This printed without supports, but I enabled slow down for overhangs. This print DOES require your printer / filament to be dialled in to be able to print the overhangs for the Tardis effectively. If you're not confident, I would enable supports. You would not be able to see it or remove it as the supports should only be applied to areas inside the Tardis. 
2. I used a layer height modifier to modify the layer height specific to the Tardis (2.04mm - 33mm) to increase it to 0.16 to speed up the print.
3. I also modified the infill for the the Tardis and the ‘Generic Cube’ to only print at 10% with 4 walls and 4 top and bottom surfaces. 
4. Since this print re-uses the Blue and the Black, if you are using only 1 AMS, I suggest swapping out Slot 3 (should be orange) for the white when you are swapping the colours out. 
5. My recommendation is to have Black, Blue, Orange, Yellow in Slots 1,2,3, and 4 in the AMS, and then swap the orange for white when the orange is done printing. 
6. If you want to use a different colour for the Tardis, then you can swap out the Blue accordingly

**Filament Instructions**
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

 

**Filaments Used:**
- PLA Kingroon Black Transmission Distance: 0.4
- PLA+ Polymaker Starlight Neptune (Blue) Transmission Distance: 1.8
- PLA CC3D Orange Transmission Distance: 7.4
- PLA CC3D  Lemon Yellow Transmission Distance: 8
- PLA Kingroon White Transmission Distance: 8

 

**Swap Instructions:**
- Start with Black
- At layer #8 (0.76mm) swap to Starlight Neptune (Blue)
- At layer #9 (0.84mm) swap to Orange
- At layer #15 (1.32mm) swap to Lemon Yellow
- At layer #17 (1.48mm) swap to White

- At layer #24 (2.04mm) swap to Black

- At layer #27 (2.52mm) swap to Starlight Neptune (for the Tardis!)

Doctor Who Tardis Tissue Box Cover 

2Box_Doctor_Who_Tardis_Tissue_Cover(153mmx296mm).stl

Dalek Painting (Hueforge)

Generated an image of a Dalek via AI and painted in Hueforge. The project came out very cool and has a nice color combo that stands out. This would look great on any Whovians wall.

Design is 200x200
.3mf file included with color changes.

.stl included without color changes.

Project files for HueForge also come with download.

3D PRINTING SETTINGS
Print at 100% infill with a layer height of 0.1mm with a base layer of 0.2mm. I printed with 0.08 and a base of 0.16.

Filaments Used:
PolyTerra Charcoal Black Transmission Distance: 0.3
PolyLite Dark Blue Transmission Distance: 0.5
Default White Transmission Distance: 5
PolyLite Pro Light Blue Transmission Distance: 1
PolyTerra Army Red Transmission Distance: 0.3
PolyLite Pro Yellow Transmission Distance: 11

Swap Instructions:
Charcoal Black until layer #4 at 0.5mms
Dark Blue until layer #5 at 0.6mms
White until layer #8 at 0.9mms
Light Blue until layer #12 at 1.3mms
Army Red until layer #15 at 1.6mms
Yellow until layer #25 at 2.6mms

Dalek HueForge Painting

Adipose pen pot (no sonic)

Tom Baker cosplay sonic

After a fellow Whovian asked me to make this yesterday I decided to knock it up at work…shhh don’t tell the boss lol

4thsonic.stl

dr who

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Don't Blink (Dr. Who) - Hueforge Print

Modern Marvels - November 2023 Police Call Box

Tardis in Space - Hueforge Hybrid Print

Doctor Who Tardis Tissue Box Cover

Dalek Painting (Hueforge)

Adipose pen pot (no sonic)

Tom Baker cosplay sonic