Snowflake Ornament

snowflake with hole 2025 v2.3mf

Snowflake Corner Decoration

Snowflake Corner 2 Body.3mf

XL Rudolph

XL Rudolph.3mf

Merry Grinchmas Sign, For the XL and Not So XL Grinch.

not so xl grinch sign.stl

Christmas Pyramid

Latte Brown.3mf

The Raven **Free Through Halloween!!!** Huginn and Muninn with AMS File

Raven v1.stl

Eternal Spring Flower

Flower1.stl

GHOST WITH ROSE - ROSIE / HALLOWEENDECOR / MINIATURE

ROSIE - GHOST WITH ROSE.stl

Kaleidoscope Christmas Ball 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled it to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.

Santa's Sleigh Flatpack

sleigh_flatprint.stl

Ghost Kitten by Mesh Mayhem

Ghost Kitten by Mesh Mayhem.3mf

XL Gingerbread Man 

XL Gingerbread man.3mf

REINDEER FAMILY ABSTRACT / CHRISTMAS DECOR / HOMEDECOR / TABLEDECOR

ABSTRACT_REINDEER_SIZE-3.stl

Voronoi Decoration Vase, Dried Flower Vase

Model 11 - Voronoi Decoration Vase.stl

Chandelier Tealight Ornament

Chandelier Body.3mf

Abstract Christmas Tree

christmas-tree-top.stl

HELLFIRE BOWL / GOTHIC DECOR / EDC ORGANIZER / HOMEDECOR / KEY STORAGE / ENTRYWAY BOWL /  TABLEDECOR

decorations

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Snowflake Ornament

Snowflake Corner Decoration

XL Rudolph

Merry Grinchmas Sign, For the XL and Not So XL Grinch.

Christmas Pyramid

The Raven Free Through Halloween!!! Huginn and Muninn with AMS File

Eternal Spring Flower

GHOST WITH ROSE - ROSIE / HALLOWEENDECOR / MINIATURE

Kaleidoscope Christmas Ball 2

Santa's Sleigh Flatpack

Ghost Kitten by Mesh Mayhem

XL Gingerbread Man

REINDEER FAMILY ABSTRACT / CHRISTMAS DECOR / HOMEDECOR / TABLEDECOR

Voronoi Decoration Vase, Dried Flower Vase

Chandelier Tealight Ornament

Abstract Christmas Tree

HELLFIRE BOWL / GOTHIC DECOR / EDC ORGANIZER / HOMEDECOR / KEY STORAGE / ENTRYWAY BOWL / TABLEDECOR

XL Candy Cane

GHOST WITH HEART - MARTHA / HALLOWEENDECOR

Key, Coins & Wallet Tray "Big Business"