My Way Sign 

Display Only Flat My Way.stl

Life is a Highway

DISPLAY ONLY Life is a Highway.stl

Red Bull

This is a statue of a bull. It looks great as a decoration and prints very easily.

---

**Recommended print settings**

- layer height: 0.1 mm
- infill: 10% gyroid
- perimeters: 3
- seam position: random
- supports: no

I was able to print it without supports, and it came out perfectly at this layer height. But there is one place on the underside that may require supports on a thicker layer height.****

Star Wars May The Pumpkin Spice Be With You Decorative Sign (Updated)

PumpkinSpiceSign_noHoles.stl

Holiday Snap Together Fall Leaf Garland

Garland_Leaf03.3mf

Singin' In the Rain 

This is a literal interpretation of the song "Singin' in the Rain" in Art form. You can check out my profile for a Dancing in the rain artwork, which is a companion piece. 

Print Settings: .2mm layerheight no supports If using Bambu slicer set wall generator to Arachne. Print with The flat side of Dancing on the build Plate

Dancing in the Rain Artwork

This is a literal interpretation of the lyrics "Dancing in the Rain" from the song "Singin' in the Rain" in Art form. You can check out my profile for singin' in the rain, which will be coming out as a companion piece very soon.

Print Settings:
.2mm layerheight 
no supports
If using Bambu slicer set wall generator to Arachne.

Batty Over Halloween Print in Place Hanging Bat Decoration

BattyOverHalloween_PIP_Thin.stl

Collider v3.stl

This is the Collider from Spiderman: Into the spider verse commissioned by Kingpin. I have attempted to stay as true to the shapes in the film analysing every scene with the collider in. The design is made so that filament colour changes can be made for the respective colours needed for each section.

I would love to see photos as I have not yet had time to print this as the time I did have and set it off to print my filament sensor went haywire and refused to cooperate.
I have added a picture from the slicer where I have included colour changes.

Using 0.2mm layer height. The layers for colour changes I have made are:
37, 41, 46, 51, 81, 129, 172, 229, 241 and 268

In mm this is:
7.4, 8.2, 9.2, 10.2, 16.2, 25.8, 34.4, 45.8, 48.3 and 53.6



Crystal Controller Stand - Holoprops

**Print-in-place
No Support Needed
Tested with the PS5 controller, Xbox One and Series X controller, and Nintendo Switch Pro Controller.**

Here's the Crystal Controller Stand
Super easy to print in any color to go along with your TV or desk setup!
Check out my other Crystal Design for a matching Gaming Setup.

The model was carefully designed to keep your controller safe from falling and should resist some gentle knocks.

To get the best out of the STL file, please follow these guidelines:
• No support is needed. Everything is Print-in-Place.
• Layer Height 0.2mm
• Nozzle 0.4mm
• Recommended infill 15%.
• Recommended Infill Pattern: Gyroid or Cubic
• 2 walls are okay. 3 will get you some extra strength.

decoration

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

My Way Sign

Life is a Highway

Red Bull

Star Wars May The Pumpkin Spice Be With You Decorative Sign (Updated)

Holiday Snap Together Fall Leaf Garland

Singin' In the Rain

Dancing in the Rain Artwork

Batty Over Halloween Print in Place Hanging Bat Decoration

View 10 new models

View 46 new models

Stackable box “Decidua Tree”

Hexagonal Jar

Instax Mini Picture Stand

HOMER SIMPSON - LAMP

If you can't fix it, you don't own it

Illusion Cube V2

POKEMON - LAMP

BART SIMPSON - DECOR

BART SIMPSON - LAMP

Calla Lily Flower (Vase Mode)