spiderweb tiara - HalloweenWearable

This is my first model for the HalloweenWearable designs. This is a cute Spiderweb tiara that i just absolutely love!! 


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

Spiderweb-Dia254-Sect24-Span12.stl

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

Spiderweb-Dia250-Sect24-Span8.stl

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

Spiderweb-Dia250-Sect24-Span10.stl

Skull with Brain

Left.stl

Spooky cats, garden decoration

cat1.stl

Spider with web

Cat on a Pumpkin

Full.stl

Human Skull

Easy to print human skull model.

Be sure to check out my thangs profile for all o my designs.

I provided two different versions of the model. One with a flat bottom and the other without a flat bottom.

1-3 walls
no supports
any layer height

"Merry Christmas" Corner Decoration

Merry Christmas Corner.stl

Spider Window Deco.stl

Window decoration

Easily prints flat
5mm thick

All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)



Zørp-O'-Lantern Bust Stand

Here's a nice stand for your [Zørp-O'-Lantern head](https://than.gs/m/939862) ([alt](https://than.gs/m/941237))! The neck is angled so you can make the head tilt in different directions based on how to orient it.

Swap filament at 2mm to distinguish the base from the neck. You can glue the head in place or just leave it loose on the stand.

Photographed model was printed at 180% scale using [Polymaker PolyTerra Matte PLA](https://amzn.to/3PHOxFA) ([US direct](https://bit.ly/polyTerra))

Dragon Skull - closed jaw - Halloween Decoration

Twisted Scales Vase

One of my vase designs which reminds me of a spiral of scales, like what those on a dragon might look like.

Print Settings:
No support
Enable Vase Mode (Spiralized Contour or the equivalent for your slicer)
.1 - .2mm layer height

Halloween Pumpkin 2 - Halloween Decoration

Giant Snowman - Improved Bolts

Demo - All files.3mf

Straight and Spiral Vase

This is a spiral vase intersected with divisions going straight down the sides, hence the Straight and Spiral name.

Print Settings:
No support
Enable Vase Mode (Spiralized Contour or the equivalent for your slicer)
.1 - .2mm layerheight


Halloween Witch Moon Coaster

WitchCoaster.stl

Stake magnet

Do you think ordinary magnets are a bit mundane? Do you wish you could add a unique touch when pining something up? Feel free to stake someone's heart out, or attach your calendar to the Fridge with this cool stake magnet! 

As a bonus, you can use layer swaps to get the running blood effect, meaning that a multi-color printer is not required. (One 8mm diameter, 2mm tall circular magnet is required for this print.)

Print Settings:
No supports
.08mm - .12mm layer height
15 - 25% infill




decoration

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 17 new models

Skull Pop Beads

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

View 13 new models

Spooky cats, garden decoration

View 11 new models

Cat on a Pumpkin

Human Skull

"Merry Christmas" Corner Decoration

Spider Window Deco.stl

Zørp-O'-Lantern Bust Stand

Dragon Skull - closed jaw - Halloween Decoration

Twisted Scales Vase

Halloween Pumpkin 2 - Halloween Decoration

Giant Snowman - Improved Bolts

Straight and Spiral Vase

View 12 new models

Stake magnet