Fireworks Table Decorations - Small

Fireworks Small 2.stl

Spooky Pumpkin

SpookyPumpkin_SinglePart.stl

Beskar Short Sword | No AMS, No Support, No Glue

Silk Silver.stl

Knight’s Sword Kit | No AMS, No Support, No Glue

Fossil Grey 1.stl

Smiley Toad

Toad.obj

 Baby Polar Bear

Baby Polar Bear FREE.3mf

puppy dog face perspective illusion wall art home decor

puppy dog face.stl

Brass Ankör ~ A Home Decoration

Anchor (1 Piece).STL

Lying baby dragon - compatible google nest mini

baby dragon - Nest mini - only for multi color printer.stl

All in one cosmetic organizer bathroom

ALL IN ONE ORGANIZER.stl

Bunny Wine Bottle Holder / Nice and Naughty Versions / No Supports / 3MF Included

Nice Bunny Bottle Holder Bowtie.stl

RING | Fastprint Table Lamp

RING_table-lamp_Shade.STL

Frosty Snapman - Flat Base.stl

Frosty Snapman - Mid to Top with Face and Buttons.stl

Modern Rainbow Vase

Modern Rainbow Vase.STEP

Kaleidoscope Christmas Ball 1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled a similar design to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.


decoRation

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fireworks Table Decorations - Small

Spooky Pumpkin

Beskar Short Sword | No AMS, No Support, No Glue

Knight’s Sword Kit | No AMS, No Support, No Glue

Smiley Toad

Baby Polar Bear

puppy dog face perspective illusion wall art home decor

Brass Ankör ~ A Home Decoration

Lying baby dragon - compatible google nest mini

All in one cosmetic organizer bathroom

Bunny Wine Bottle Holder / Nice and Naughty Versions / No Supports / 3MF Included

RING | Fastprint Table Lamp

Frosty Snapman - Flat Base.stl

Modern Rainbow Vase

Kaleidoscope Christmas Ball 1

Knight’s Axe Kit | No AMS, No Support, No Glue

Knitted Hippo

Flexi Skeleton, Fridge Magnet

Rusty Axe Fridge Magnet

4 Layer Chinese Dragon