Hinged Calibration Cube Accessories 01

agepbiz_cube_tounge.stl

KWOB Puzzle // Ziggy A

kwob-ziggy.stl

5x5 Puzzle Cube

solution.stl

XYZ Calibration Test - Vase Mode

Quick 10 minute print - 0.3 m of filament

Don't waste your precious time and filament printing a so called “calibration cube”!

This quick print provides clues for all the important features and settings:

Extrusion width
E-steps / rotation distance (X, Y, Z)
Bridging
Cooling
Overhangs
Speed / accelleration
First layer / bed adhesion
Retraction (stringing test, seam test)
Preassure advance / linear advance
Print Settings
1 perimeter
0.2 mm layer hight
3 bottom layers
Disable “Ensure vertical shell thickness” (PrusaSlicer)
No Infill, top layers, brim or supports

**Troubleshooting**
https://www.reddit.com/r/3Dprinting/wiki/troubleshootingandcalibration

Some quick tipps:

_**Extrusion width**_
Check if the thickness of one of the outside walls at the top matches the setting in your silcer
**_E-steps / rotation distance (X, Y, Z)_**
If the outside dimensions are not 20 mm but way off, correct the settings for the affected axis
**_Bridging / cooling_**
If the bridging perimeters in the top center are drooping/sagging, check cooling an bridging settings in your slicer
45° overhangs
If the perimeters in this section are drooping/sagging, check the part cooling and cooling settings in your slicer
**_Speed / accelleration_**
ringing, bulged corners - you may want to reduce speed and/or accelleration (also see Preassure advance / linear advance)
**_First layer / bed adhesion_**
If there are problems with the print adhering to the bed, check if
- the bed is level and parallel to the x-axis
- the bed is clean - no dirt or grease
- the bed temperature is correct
If the print is wider at the bottom (first few layers) than at the top, check your z-offset and first layer settings
**_Retraction (stringing test)_**
If you experience stringing, check your retraction and cooling settings
**_Preassure advance / linear advance_**
If large seam gaps or bulged corners appear, consider tuning your printer firmware settings for preassure advance (Marlin) / linear advance (Klipper)

XYZ Calibration Test

Print-in-Place Geared Rising Box

Print in Place Geared Rising Box.3mf

Twisty Cube Puzzle

Twisty Cube No Supports.3mf

cuboalga.stl

Minimalist cube shaped candle holder.
Algae version.



Planetary Gear Cube Fidget Toy by Ruven Bals

Planetary Gear Cube by Ruven Bals.3mf

Lil Astro Puzzle // Mini Astrolabicon

LilAstro.stl

citycube | candle holder

citycube.stl

CREATEK S-111 | 3D Printable Storage Box (STL)

View all files in the CREATEK series, setting recommendations, and more: https://bit.ly/createk3d

This model is work licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. To view a copy of this license, visit: http://creativecommons.org/licenses/by-nc-sa/4.0/

CREATEK_S100_v1.stl

Auxetic Cubes // 18mm 2x2

Auxetic Cubes 18mm 2x2.stl

Force Field Puzzle 2x2 Cube

B.stl

Auxetic Rectangles // 18x32mm 5x3 Stacked Diagonals

Auxetic Rectangles 18x32mm 5x3 stack diagonals.stl

Cuboid Slide Fidget

RectSlide12mm4x4Snug.3mf

Triple Twist Cube (Stochastic)

Stochastic 50mm Cube 1.stl

Mario Question mark box bank

mario block bank top.stl

Auxetic Cubes // 30mm 3x3

Auxetic Cubes 30mm 3x3.stl

Organic Swirl Planter Round

organic-swirl-planter-round-small.stl

75mm PERSPEKTIVA Cube

PERSPEKTIVA_Cube_75mm.stl

cube

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Hinged Calibration Cube Accessories 01

KWOB Puzzle // Ziggy A

5x5 Puzzle Cube

XYZ Calibration Test - Vase Mode

Print-in-Place Geared Rising Box

Twisty Cube Puzzle

cuboalga.stl

Planetary Gear Cube Fidget Toy by Ruven Bals

Lil Astro Puzzle // Mini Astrolabicon

citycube | candle holder

CREATEK S-111 | 3D Printable Storage Box (STL)

Auxetic Cubes // 18mm 2x2

Force Field Puzzle 2x2 Cube

Auxetic Rectangles // 18x32mm 5x3 Stacked Diagonals

Cuboid Slide Fidget

Triple Twist Cube (Stochastic)

Mario Question mark box bank

Auxetic Cubes // 30mm 3x3

Organic Swirl Planter Round

75mm PERSPEKTIVA Cube