LR162-D Lid or Cover for Infinite Containers 162 Series

Printable Objects Infinite Containers LR162-D_240711.stl

Single Gang Toggle Switch Style Wall Plate (Original Replacement)

WallPlate B10.stl

HP1 - Remote Control Holder - AC / Heat Pump 

HP1.stl

WR2 - Vertical Pocket and Tray

WR2.stl

C11 - Single-Gang Single-Sided Electrical Outlet WallPlateMate

WallPlateMate C11.stl

Cactus USB socket Cover

USBcoverCactus_mix_AMS.3mf

Custom cable cover

cable_cover.stl

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

PART_BACK-RIGHT_RAISER_K1-MAX (1x).stl

Casio DW-1000 replacement bezel

Casio DW1000 watch bezel.STL

 ORGANIC PUMPKIN TWIST-OFF PLANTER

220624-07-001-COVER.stl

TPU Bumpers (Squiggle)

15mm x 65mm squiggle.stl

IONIC COLUMN TWIST-OFF PLANTER

220624-04-002-PLANTER.stl

N05-Travel-Cylinder-Eyewear-Case47a.stl

BASE-Cylinder-Case-Eyewear-47a.stl

Keith Haring Cover from the Art Collection for the MOD Panel

Cover-Fire-HD8-Keith-Harring_Front_177x241.stl

x56 TGLCover v2.stl

PLEIADES Soap Cover // 47x96x130

PLEIADES Soap Cover 47x96x130.stl

Montech Air 100 PCI-E cover lock.3mf

Wyze Cam V1/V2 Outdoor Camera Housing

botmount-bot-nolens-v3.stl

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Ring_Door_Sensor_Cover.stl

This is a cover for the Ring Contact Sensor 2nd Generation.
The cover is only for the main part (not the magnet part).

cover

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

LR162-D Lid or Cover for Infinite Containers 162 Series

Single Gang Toggle Switch Style Wall Plate (Original Replacement)

HP1 - Remote Control Holder - AC / Heat Pump

WR2 - Vertical Pocket and Tray

C11 - Single-Gang Single-Sided Electrical Outlet WallPlateMate

Cactus USB socket Cover

Custom cable cover

CREALITY K1 MAX RAISER / RISER / DECKEL / TOP COVER / UPGRADE (VERSION 1)

Casio DW-1000 replacement bezel

ORGANIC PUMPKIN TWIST-OFF PLANTER

TPU Bumpers (Squiggle)

IONIC COLUMN TWIST-OFF PLANTER

N05-Travel-Cylinder-Eyewear-Case47a.stl

Keith Haring Cover from the Art Collection for the MOD Panel

x56 TGLCover v2.stl

PLEIADES Soap Cover // 47x96x130

Montech Air 100 PCI-E cover lock.3mf

Wyze Cam V1/V2 Outdoor Camera Housing

OP-1 BestCase Decksaver and Stand // Resonance [Red Eye Series]

Ring_Door_Sensor_Cover.stl