Grow // VR Sculpt

'Grow' was sculpted in virtual reality using an application called Gravity Sketch, which accurately captures my gestures as three-dimensional brushstrokes. I feel this brings a human sensitivity into 3D modeling, which is often more technical than it is visceral.

Use standard print settings. Scale as desired.


Marmalade Reef

I wanted to print something complex to torture test my printers so I sculpted this reef in VR using Gravity Sketch!

It should be able to print without supports, but I would recommend a higher than normal z-hop or vertical retraction (maybe 1mm) during travel moves, since the tallest corals are at risk of being knocked over.

Feel free to scale as desired!

Coral Vase

Wall coat hook “caliendrum coral”

01_body.stl

bowl "heliopora coral"

**A coral inspired bowl for whatever is just flying around and needs a proper storage location.**

**Scaling / size**
- Upscaling (100% +): as big as you want
- Regular size (100%): 200 x 200 x38 mm
- Smaller (80%): 160 x 160 x 30mm
- Small (60%):  120 x 120 x 23 mm
- I would not scale it down below 40%

Don't forget to post your makes!

**Print settings**
Material usage (100% scale): 200g
Print time: (100% scale): 17h

Material usage (80% scale):120g
Print time: (80% scale): 11h

Material usage (60% scale): 60g
Print time: (60% scale): 5h

Material: PLA
Print direction: stl is rotated correctly
Support: none
Outer walls: 3
Infill: 15%
Build plate adhesion type: none
If you experience any problems, please feel free to contact me on twitter or Instagram

bowl_heliopra.stl

Porites furcata

This coral model, belonging to the coral collection for accessories, honours the species Porites furcata.

Honouring its family (finger coral), it is designed to store rings while decorating your home by immersing it in an underwater environment.

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable, although its size is correct for conventional rings.

I printed it with purple matte PLA with 15% infill and 0,16 mm layer height.

Acropora palmata

This coral model, belonging to the coral accessories collection, honours the Acropora palmata species.

In it you can leave your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can leave your house keys, wallet...).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories.

I printed it with red matt PLA with 15% infill and 0,2 mm layer height.

Aplysina archeri

This coral model, belonging to the coral accessories collection, honours the species Aplysina archeri.

In it you can keep your bracelets, pendants, rings and at the same time decorate your home by immersing it in an underwater atmosphere.
(Apart from jewellery you can even use it as a vase).

**3D PRINTING PARAMETERS**
The model consists of a single part that is scalable. You can increase its size to be able to store even other accessories or use it as a vase.

I printed it with orange matte PLA with 15% infill and 0,2 mm layer height.

Milepora alciocornis

coral (1).stl

Jewel Tree - Holder - Coral shape

Jewel Tree-holder made for my wife.
Shape taken from coral photos on Google.
280mm x 160mm wide x 250mm high
enough to old earrings and necklaces.
Made in PLA, i used a brilliant red one.
Enjoy.


coral

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 66 new models

View 111 new models

View 17 new models

Wall coat hook “caliendrum coral”

bowl "heliopora coral"

Porites furcata

Acropora palmata

Aplysina archeri

Milepora alciocornis

Jewel Tree - Holder - Coral shape

Rectangular Coral Sushi Platter

Round Coral Sushi Platter