Flashforge Keychain

Flashforge keychain black.stl

Dell 3100 Chromebook cover and pencil holder

Chromebook pencil holder.stl

Futro S930 Double SSD mount

I needed some way of fixing 2 2.5"drives inside the case of my Fujitsu Futro S930. 

This thing can hold 2 drives, the bottom one with two screws, the upper one upside down with three screws.

The holder has small Ts on the bottom to slide into the metal bracket which is next to the motherboard and normally holds things like a PoE module, a speaker or a smartcard reader. It's fixed to the bracket by one screw.

When assembling you have to this in a particular order:
1. First remove the metal bracket from the case.
2. Slide in the holder and put in the one screw to fix it to the bracket.
3. Insert the lower drive and put in the two screws from underneath (then you'll see why it's only two screws holding it)
4. Insert the upper drive and fix it.
5. Mount the bracket with the drives in the holder back into the case.

Steps 4 and 5 are interchangable, there should be enough space to hold the drive and screw it to the holder.

Since I don't have a PoE module at hand I can't say for certain if it still fits with the drives plugged in, but what I know for sure is that there is enough clearance to the top to still insert a PCIE card with a low profile (things like a graphics card won't fit, but a USB or NIC should be fine)

During it's several iterations I found out that the small T sliders are quite fragile, so moving the entire model up by 2mm from the build plate helped with them not snapping of, since there are supports underneath them which you need anyways.

Also worth noting is that I've only tested the holder with SSDs which are quite light. Even though HDDs should fit fine (even the tall ones) I'm not sure how the posts holding the upper drive will hold up with the mass.

Futro S930 Double HDD mount

Yellow CRAM Military Truck with Movements

Custom holder for darts

Logo.fbx

Duratech TS-1554 20w

Vertebrae XBOX Controller and Headphone Stand! 

Vertebrae Stand XBOX - Large.stl

Dividers Pencil case

Part1.SLDPRT

testFilev1.SLDPRT

This file is a test file to check for SW syncing

Citadel - Dual 5015 for EnderXY

On Tripod Attachments

RopeV2.obj

Peristaltic Valve

Yellow Sugarcane Harvester With Movements

Folding Table Leg Hinge

Dragon plant climber

Vertical laptop stand (3 laptops)

So I have a few thick laptops to organize. 

I did a single laptop stand design a few days ago and expanded on that. 

Some overhang on the middle 2 ribs, will probably need supports to prevent sagging.  

*****
Want to buy me a coffee?
https://www.buymeacoffee.com/zer0s

Clicking on my affiliate links below will give me a small kickback if you purchase something. (at no extra cost to you)

AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DeAZr9P
*****
Consolidated affiliate links of other 3D printing-related items:
https://wp.me/peMLu6-j

For Amazon affiliate links
https://wp.me/peMLu6-2C

cute calibration cube 

Cute calibration cube
its 20mm by 20mm by 20mm 

Seagate Expansion 4TB External Drive Holder // Peg Anything

Get your [Seagate Expansion external drive](https://amzn.to/3L9GIWh) off the desk and on the wall with this holder compatible with your standard 1" grid 1/4" hole pegboard. Nice!

This is for the 4TB model, so make sure it matches what's shown in my photo. I'm not sure if the lower storage sizes are thinner.

 

 

peg-seagate4tb.stl

computers & electronics

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Flashforge Keychain

Dell 3100 Chromebook cover and pencil holder

Futro S930 Double SSD mount

Yellow CRAM Military Truck with Movements

Custom holder for darts

Logo.fbx

Duratech TS-1554 20w

Vertebrae XBOX Controller and Headphone Stand!

Dividers Pencil case

Part1.SLDPRT

testFilev1.SLDPRT

Citadel - Dual 5015 for EnderXY

On Tripod Attachments

Peristaltic Valve

Yellow Sugarcane Harvester With Movements

Folding Table Leg Hinge

Dragon plant climber

Vertical laptop stand (3 laptops)

cute calibration cube

View 21 new models