s25 edge v3.stl

s25 edge case v3.stl

Iphone 13 Funny Case

iphone 13 funny case V3.stl

Four Leaf Clover Easter Egg Container

FourLeafCloverEggContainer.3mf

OP-1 BestCase Decksaver and Stand // Wicker

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

OP-1 BestCase Decksaver and Stand // Interference

D11 Printer Case

D11 Insert.stl

Raspberry pi 4 B panel connection guide

raspberry pi 4 panel mounth.step

Pink Cigarette Box Case

pinkCigaretteBox.3mf

 Hackintosh+ Raspberry Pi 3/4/5

Hackintosh Plus Lite.stl

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series] 

Protect your OP-1 in the coolest way possible with a _decked out cases!_ The OP-1 BestCase is both a deck protector and a stand that tilts the OP-1 up to take advantage of the same ergonomic benefits that computer keyboards have been rocking since the 80's.

This design comes from my Red Eye Series, which consists of 3 original art pieces inspired by sleepless nights spent searching for inner peace while making tunes.

---

To get the 2 color graphics, swap filament at 0.4mm layer height. This can be achieved with pause at layer height plugins for Cura, Octoprint, etc, or by slicing two separate models, one that stops at 0.4mm and the next starting at 0.4mm. Some printers have a built in pause at layer height feature.

The model includes round tabs at each corner to improve build plate adhesion. They can be ripped off afterward, or cleanly removed with a X-acto knife.

As you're likely aware, PLA is not sun-friendly, so avoid exposing a PLA case to warm environments to prevent warping. If you want extra security, I recommend silicone bands like these [Grifiti Bands](https://amzn.to/2Vs8Cn7) (also on [eBay](https://ebay.us/WTUA4B)) or [these](https://amzn.to/2KlG1JT).

 

Flower Trinket Box

Trinket Box Lid Topper STL.stl

Pokémon Cards Case (Trapped Magnets Lock)

PCC-R03_ASY-HI-RES.3mf

MX4 TRAVEL CASE

MX M4_PADDING.3mf

Tic-Tac Case Insert for Adafruit ESP32-S2

This is an insert for a standard (1 oz) Tic-Tac box that allows you to use it as a small case for an Adafruit ESP32-S2, 400mah battery, and a button or two on the lid. I followed [this](https://learn.adafruit.com/wordle-personal-esp32-s2-web-server/overview) adafruit guide and put my own webpage on instead.  The insert is designed to allow  access to the USB-C port through the flip-cap on the top of the case.

case

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

s25 edge v3.stl

Iphone 13 Funny Case

Four Leaf Clover Easter Egg Container

OP-1 BestCase Decksaver and Stand // Wicker

OP-1 BestCase Decksaver and Stand // Interference

D11 Printer Case

Raspberry pi 4 B panel connection guide

Pink Cigarette Box Case

Hackintosh+ Raspberry Pi 3/4/5

OP-1 BestCase Decksaver and Stand // Wide Awake [Red Eye Series]

Flower Trinket Box

Pokémon Cards Case (Trapped Magnets Lock)

MX4 TRAVEL CASE

Tic-Tac Case Insert for Adafruit ESP32-S2

ory pencil case

PS1 / PS2 MEMORY CARDS Grid Holder Storage 100 models

Dice Holder with roller top

Air up pod case.

Raspberry Pi 3B Articulating Case

#1 Nike Airpods pro 1/2 case