Gridfinity 37mm Bottle holder 1x1x2

Gridfinity 1x1x2 37mm Bottle holder.stl

GEN2 Case Cubby Insert – All Sizes

Shelf Insert 185-2W.stl

Upside-Down Bottle Holder & Tray

UpsideDownBottleHolder.stl

LIFAD coaster

lifad_coaster_bier.3mf

Minimalist Wave Cup Drying Rack

Drying Rack Wave.stl

Gridfinity Bottle Lid (Correct Threading)

A lid for the Gridfinity bottle with threading that matches the bottle for a better fit than the existing model.

I recommend printing with 0.4mm line width for best quality threads.

 Gridfinity Bottle Cap With Logo

gridfinity_bottle_cap_logo.step

Butterscotch Bottle Cauldron

DISPLAY ONLY.stl

Bottle Opener Wall Mounted

Bottle opener 001.STL

Spray Bottle Hangar 

This is a Spray bottle hangar I designed around a basic idea with a strict guideline. 
No brim, rafts or supports required.
These are capable of holding 1KG and can withstand roughly 1G of force applied to them In this revision if you have good layer adhesion. Printed upright I found minimal to no stringing even on an untuned machine. This is a 1-2 hour print depending on the machine. Light on material and strong I print this at 3 wall, 3 top/bottom and 10-20% infill. Tested in Esun PLA+ and in Esun PETG. Please share with attribution and give feedback as this was my first design taken to testing and commercial phase. Some early concepts are in photos and had many issues, early revisions can be provided if wanted for some reason. Best mounting practice is 2 x 8G 16mm Button heads, Remove mouse ears after print.
 

** Update
V1_6
Re sketched and reformatted some of the features for increased slicer reliability and modified how the different facets of the design interact. This has reduced file size from  9.64Mb to 1.06Mb. Changed Mouse ear generation from eye balled placement to a grid deploy and changed the 2 sides from separate sketches to a mirrored sketch increasing the symmetry by 0.05mm. 
Again any issues or notes please comment, Makes are always appreciated. 

Water Bottle Cup Plant Waterer  1inch gasket with Air channelv2

Simple plastic bottle watering attachment for narrow spaces, like violets etc.
Self pouring if you tilt bottle down.
Requires 1 inch rubber gasket. 
No support required.
Original print - PLA 0.2mm layer

CupHolder.stl

Ribbed Bottle Vase

ribbed vase.stl

WaterBottle GLTF

Khronos Water bottle

https://github.com/KhronosGroup/glTF-Sample-Models

4D klein bottle

4d.obj

Isopropyl Alcohol Quart Holder // Peg Anything

Gotta have that iso nearby for cleaning the printer bed! This simple pegboard mount has three pegs that clip into a standard pegboard (1" grid 1/4" holes).

Fits a generic quart size isopropyl container (up to 82mm x 82mm)

No supports required, but there is quite the bridge, so you may want some light supports anyways depending on your printers bridging abilities.

bottle

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity 37mm Bottle holder 1x1x2

GEN2 Case Cubby Insert – All Sizes

Upside-Down Bottle Holder & Tray

LIFAD coaster

Minimalist Wave Cup Drying Rack

Gridfinity Bottle Lid (Correct Threading)

Gridfinity Bottle Cap With Logo

Butterscotch Bottle Cauldron

Bottle Opener Wall Mounted

Spray Bottle Hangar

Water Bottle Cup Plant Waterer 1inch gasket with Air channelv2

CupHolder.stl

Ribbed Bottle Vase

WaterBottle GLTF

4D klein bottle

Isopropyl Alcohol Quart Holder // Peg Anything

Big Milk Bottle Cap Container - Vase Mode

Idun Ketchup Stand

Decor Wine Bottle

MLB - TOR Baseball Bottle Opener