Giant Bead for giant bead animals

Large Bead.stl

Planes Walker keychain 

plans walker keychain display.stl

Pony bead | Standard 6mm x 9mm | Beads for friendship bracelets and other beaded crafts!

pony bead_6x9_4mmhole_v2_karenchaudesigns.stl

Beedle - The 3D printed beading needle

Beedle_the-beading-needle_karenchaudesigns.stl

Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


KWOB // Sloped

kwob-sloped.stl

Astrolabicon Puzzle // Orb

astrolabicon-orb.stl

Lil Astro Puzzle // Mini Astrolabicon

LilAstro.stl

Marble Sorter for 14mm (9/16") Marbles

Glass marbles aren't entirely consistent, so I designed this marble track that sorts standard 9/16" marbles by .5mm diameter increments. Made to help me assemble my [Astrolabicon puzzle](https://than.gs/m/914605), but use it for whatever means you require!

Let marbles roll from left to right and they will fall through to sort themselves. You may need to slightly raise the left side to get the marbles rolling on their own.

bead

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Giant Bead for giant bead animals

Planes Walker keychain

Pony bead | Standard 6mm x 9mm | Beads for friendship bracelets and other beaded crafts!

Beedle - The 3D printed beading needle

Ghost Pop Beads

Skull Pop Beads

View 16 new models

View 78 new models

View 18 new models

View 21 new models

View 20 new models

View 66 new models

View 111 new models

View 72 new models

Lightshade with Captive Dimmer Beads

Pi Meditation Beads