Articulated snake - new design 200mm and 350mm lenght

350mm.stl

Articulated snake - new design from small keychain up to the Elegoo Giga Storm version!!!

300.stl

Hero Me Documentation - Details.stl

Documentation Membership Details.stl

Kobra Max Lifecam 5000 Mount

MicrosoftCameraMount_45.stl

light strip clips MK3 Ender3 version

I made this for my own light strip that i ordered from amazon.
Light clips sit between the top bolts

link is for those wanting it, its NOT an affiliate link.

https://amzn.eu/d/3mR5AXP

light strip clips MK3 (open ended)

Filament Spool Stabilizer

The spool holder that came with my AnyCubic Vyper is not parallel with the ground, causing the spool to naturally slide to one side of the spool holder. 

If there's an overlap in the filament spool, it could cause the spool to jump off the spool holder.

I've created a bracket that easily slides into the spool and locks onto the spool holder. 

-No Support
-20-100% Infill

HMG7 LED Curved 100mm Lightweight 4020 Ducts.stl

This STL is a component of the Hero Me Gen7 Printhead assembly for 3D printers.

**Hero Me Gen7 is a modular printhead platform for 3D printers with excellent part cooling and the most compatibility across printers, hotends, extruders, ABLs, and other components.**

 The Hero Me Gen7 is all about choice and personal preference. If you have been upgrading your 3D printer, you've made choices about what is important to you, Your choices are likely going to be different from everyone else. When choosing a hotend, extruder, and ABL combo (not to mention fans and accelerometers), where are you going to find a printhead platform that will accommodate all your selected components (which could be a rare combo), for your specific 3D printer AND provides part cooling that gives you great print results. **This is what the Hero Me Gen7 is all about!**

Think of the Hero Me platform as lego blocks for printheads, there are mounting parts for each component (hotend, extruder, fans, ABLs, etc.) that stack and mount to a core Base. Component specific mounting parts can be interchanged for another of the same type. So, should you change your component selection(s) in the future, you do not have to start over, you simple replace the single STL mount that is matched to the new component. There is no need to yet again go looking for a new set of mounting hardware that was not likely to have been designed to work with each other in the first place.

So to give you choice and fulfill your personal preferences in 3D printing, the Hero Me Gen7.3.2 now supports over 100 3D Printer models (plus clones), 46 Hotends, 34 Extruders (over 45 mount options), 17 ABL Sensors (34 mount options), 35 Part Cooling Duct options, 12 Cable Management options, 11 ADXL345 mounts, and 4 LED bar mounts (among many other options). Gen7.3.2 supports most of the popular 3D printers and components available. 

If you know your 3D printer model, hotend, fans, and optionally an extruder, ABL sensor, ADXL345 accelerometer (for Klipper), and any other options for your printhead assembly, you can scan through the Hero Me Gen7 Release 3.2 folder, or use the Thangs Advanced Search.  Be sure to set the creator filter to: ‘MediaMan3D’ then search for ‘HMG7’ which should bring up all the STLs. You can refine your search from there by component, brand, etc.

If you find that you have a 3D printer model or component that is not yet supported, send me information and preferably a STEP or STL (or link) if you know of one for the X carriage of that printer or the component and I will create a mount for it. Send to: [MediaMan3D@gmail.com](mailto:MediaMan3D@gmail.com)

If you want Hero Me documentation… The Hero Me Gen7.3.2 folder of STLs on Thangs is organized into sub-folders by component category, with sub—sub-folders for type and brand with well defined filenames to make it easy to find what you need. If you want documentation to help you select and assemble the Hero Me Gen7 for your specific 3D printer, you can get a membership plan here on Thangs.  You will get a detailed 56 page parts selection and illustrated assembly guide along with assembly videos, private Discord server access (with over 2,000 Hero Me users), technical support, and much more, You also get exclusive access to new STL releases 30 days before being posted to Thangs, and other STL libraries. Check out the membership plans here:  [https://thangs.com/designer/mediaman3d](https://thangs.com/designer/mediaman3d)

Anycubic Vyper Simple Direct Drive Conversion

Vyper Direct Drive Bracket v11.3mf

Ribbon Cable guide for Anycubic

This is a Ribbon Cable guide for Anycubic (tested on Vyper and Kobra Max). The part stops the ribbon cable to the print head from breaking from lateral movement.

Vyper

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Articulated snake - new design 200mm and 350mm lenght

Articulated snake - new design from small keychain up to the Elegoo Giga Storm version!!!

Hero Me Documentation - Details.stl

Kobra Max Lifecam 5000 Mount

light strip clips MK3 Ender3 version

light strip clips MK3 (open ended)

Filament Spool Stabilizer

View 510 new models

Anycubic Vyper Simple Direct Drive Conversion

Ribbon Cable guide for Anycubic

View 14 new models

Anycubic Vyper & Kobra Max Part Cooling Duct UPGRADE! - Improved print quality

Caution Hot !!! Symbol