Cup of Teeth - Teacup

Dual Colour Teeth Cup - Teeth.stl

Gridfinity 1x1 Glasses Holder - No Supports

Here is a basic, 1x1 Gridfinity glasses holder. Holds sunglasses as well as eyeglasses up to 145mm in width. However the file can easily be modified to increase or decrease height as needed.

Use the following print settings and you should have no issues as well as an under 2 hour print:

Layer height: .24 - .32
Walls / Top / Bottom: 3
Infill: 10% - 20%
Supports: none

View all of my Gridfinity models here:

https://thangs.com/search/gridfinity%2520%252B%2520%2522thingymaker9000%2522?manualModelView=true&scope=all

Ronin Sword from Hawkeye

Full Sword.stl

Customizable Alphabet Train

Full Alphabet.stl

Print-N-Place Klackers

These are klackers or noisemakers that print in place as one part! They make a great toy for kids but I also find them as a great fidget toy for adults too.  

This a new version which is much easier to print. To have a successful print, most importantly you must have good adhesion to the bed. For the loudest klackers, more walls and infill the better but watch out for curling. If you have issue with curling, enable z-hop, or increase the amount of plastic after the tangency of the balls.

Getting them to Klack
If you are having a hard time getting them to klack I found the easiest way to get them started is to set them flat on a table so the klackers are spread out and as you pick them up off the table whip them back down to make them klack. There are two techniques; the single klack and the double klack as demonstrated here: 


Night Dragon

Night Dragon models perfect for your tabletop games like Dungeons & Dragons. STL file and all parts ready to 3D print. See all my work or support me: https://www.patreon.com/mz4250

Night Dragon.stl

FLORIA - Stackable Flower Organizer I Pen Holder

FLORIA - Flower organizer.3mf

Paper Towel Holder Style 1

Paper Towel Holder Style 1 Large.STEP

Floppy Disk Coasters - 2 Designs

floppy-front.stl

Death Star Popcorn Bucket

Deathstar Bucket.stl

Cute Cottage - Village House - Lamp

Cute Cottage.3mf

Thompson 1928 Sub-Machine Gun - Functional Assembly

MAGAZINE 50 TOP.STL

Lightsaber Keychain (Reatractable)

griff lichtschwert.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


V

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cup of Teeth - Teacup

Gridfinity 1x1 Glasses Holder - No Supports

Ronin Sword from Hawkeye

Customizable Alphabet Train

Print-N-Place Klackers

Night Dragon

FLORIA - Stackable Flower Organizer I Pen Holder

Paper Towel Holder Style 1

Floppy Disk Coasters - 2 Designs

Death Star Popcorn Bucket

Cute Cottage - Village House - Lamp

Thompson 1928 Sub-Machine Gun - Functional Assembly

Lightsaber Keychain (Reatractable)

Skull Pop Beads

Tiny Owl (inc 3mf)

kirby pen holder 3mf

Mushroom shelf “Amanita Caesarea”

Liquid Cat Fidget Toy Print in Place

TISEO - Toilet paper holder - tissue dispenser

Inferno Articulated Dragon