Generative design organic bookend.

4.2.step

Generative Design Podium Table

generativetable_top STEP.step

Icosahedron Blank D20 Collection

Double_Pointed_Pentagon.step

Generative Design Display Stand

9.step

Topology Tiles – Square

FK S Square Tile 1.stl

Topology Tiles – Hex

FK S Hex Tile 2.stl

Lactuca Cylinder Vase Large

The organic forms in the Lactuca Series bear a resemblance to the contours of leafy lettuce. Stare at them long enough and your mind might start seeing strange plants and creatures begin to appear!

See here for video: https://youtu.be/yd4LJx4f3vk 

Other designs in the Lactuca Series:
Lactuca Round Bowl:
Lactuca Cylinder Vase Small: https://than.gs/m/878846 
Lactuca Cylinder Vase Medium: https://than.gs/m/878851 
Lactuca Cylinder Vase Large:


Lactuca Cylinder Vase Medium

The organic forms in the Lactuca Series bear a resemblance to the contours of leafy lettuce. Stare at them long enough and your mind might start seeing strange plants and creatures begin to appear!

See here for video: https://youtu.be/yd4LJx4f3vk 

Other designs in the Lactuca Series:
Lactuca Round Bowl:
Lactuca Cylinder Vase Small: https://than.gs/m/878846 
Lactuca Cylinder Vase Medium:
Lactuca Cylinder Vase Large:


Surface Slab (SplitP)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S: https://than.gs/m/868235 
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Surface Slab (Fischer-Koch S)

This piece is part of a set of two large slabs constructed from different varieties of triply periodic minimal surfaces.

See here for video: https://youtu.be/vKTHPB9hKvQ 

Download the set:
Fischer-Koch S:
SplitP: 

The slabs are 3 x 3 x 2 cubes of unit cells, with the central top cell removed to allow placement of a square vase or other similar type of container. Three different  heights of square containers are included.

The footprint of each is approximately 100mm x 100mm. 


Chain Link Klein Bottle

This model uses chain link latticing to represent a three-dimensional approximation of the four-dimensional “Klein Bottle.”

See here for video: https://youtu.be/AWJ-R3GBT80 

The concept of a Klein bottle was first described in 1882 by the German mathematician Felix Klein. It is a closed non-orientable surface that has no inside or outside. It is similar to the Möbius strip, but unlike the Möbius strip it has no boundaries and cannot physically exist in three-dimensional space.

In this three-dimensional representation, the surface intersects with itself, but in four-dimensional space the self-intersection can be eliminated. Unfortunately, I don’t have a 4D printer yet.

Modelling this intriguing shape in chain link latticing allows for visualization of the whole surface.


Top Opt Egg Holders

Top Opt Egg Holders Display.stl

Serpentes nTopologus Voronoicus

This “Serpentes nTopologus Voronoicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


Serpentes nTopologus Hexhoneycombus

This “Serpentes nTopologus Hexhoneycombus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592


Serpentes nTopologus Gyroidicus

This “Serpentes nTopologus Gyroidicus” is part of a series of three articulating snakes demonstrating various ways that nTopology can be used to design unique topology within complex designs. It incorporates the gyroid TPMS into the body of the snake.

See here for video: https://youtu.be/z7fLPr0367s 

These topology snakes use a unique print-in-place ovoid joint designed to maximize available volume and surface area for other design elements.

This joint type is stronger than the interlocking double ring joints used in many articulated designs, so this design is more suitable for use as a fidget or children’s toy.

These snakes are 72cm in length but will print on a 220mm x 220mm build plate.

Like a “ball and socket” joint, the oval-shaped ovoid from one segment is held in place by a similarly shaped socket in the neighbouring segment. Varying the relative dimensions of the ovoid and socket allows for precise control of the movement between each segment. In this design, lateral side-to-side movement is maximized, but rotation and up/down movement is slightly restricted. This more accurately mimics the “tone” and movement patterns of a real snake.

You may get some small adhesions between segments. Simply apply a bit of force to move the joint the first time, and it will be fine after that.


See here for video of similar textured snakes: https://youtu.be/8fIhzqsQP_k 

See here for stable downloads of textured snakes:
Bubble Boa: https://thangs.com/mythangs/file/62591 
Voronoi Viper: https://thangs.com/mythangs/file/62593 
Knurled Nightcrawler: https://thangs.com/mythangs/file/62592 


Topology

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Generative design organic bookend.

Generative Design Podium Table

View 16 new models

Generative Design Display Stand

Topology Tiles – Square

Topology Tiles – Hex

Lactuca Cylinder Vase Large

Lactuca Cylinder Vase Medium

Surface Slab (SplitP)

Surface Slab (Fischer-Koch S)

Chain Link Klein Bottle

Top Opt Egg Holders

Serpentes nTopologus Voronoicus

Serpentes nTopologus Hexhoneycombus

Serpentes nTopologus Gyroidicus

3D Printed Self-Assembling Cells

View 25 new models

Malfunctioning Plate and Saucer

Fischer-Koch C(Y) Lampshade

Easter Eggshell 10