Super Mushroom Container

container bottom white.stl

Maruchan Instant Lunch Ramen STASH CUP! WHAT??? #FunctionalArt #3DPrintBunny

MARUCHAN CUP O NOODLES - CUP WITH EMBOSSED LOGOS FOR MMU.stl

mini bucket

bucket.stl

A Whole-Ass Pie Earrings

Pie.stl

Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ

BKF Bottom - No Tab.stl

Fancy box

Altoids Tin Organizers

Altoids Tin Organizer 1.stl

crumpled tin can pot (NO SUPPORT)

big.stl

Tin Can

can-thewhatbrandsg.stl

Altoids tin micro sd card holder

simple design that clips under the lip of a Altoids can. Gives you spots for 30 micro SD cards and tons of extra space for everyday life.

Decorative box hinged

Heinz Bean Tin Can Stacker

BEAN.step

Soldering wire stand (Print in place)

Really proud of this one. Soldering wire stand with print in place hinge and metal shaft slid into a hole. supports most sizes of soldering wire spools, many spools can be installed at once. If you want to access the spools, just lift the metal shaft up. If a small wire spool is installed, there is always more room for insulation tape, scotch tape etc
it works incredibly smoothly and is very strong. the bottom of the stand is corrugated so it grips nicely to a rough desk but there are also round holes for rubber pads.
The middle section has all the main lead exposure health hazards noted down for when you'll inevitably forget about them from all the lead fumes you have been inhaling. The sides have tin and lead elements decals.

_The model is supposed to be printed laying down with the hinge's shaft touching the build plate. The orientation here is very important so that the hinge works properly. I printed mine with .6mm nozzle at .14mm layer height and 10% infill. it's very strong and the letters & decals and perfectly readable. No brim and only one support for the shaft slot on the left side.
After printing, a ~10cm long, 10mm wide shaft is supposed to be pushed into the hole above the hinge. If you dont have a metal shaft, you can always 3d print one though it wont look as neat._

zoids pencil holder1.stl

This is a pencil holder with a zoids logo on it. Please like and share.

Plastic Wrap / Tin Foil Holder

plastic wrap holder v1.stl

Tin

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Super Mushroom Container

Maruchan Instant Lunch Ramen STASH CUP! WHAT??? #FunctionalArt #3DPrintBunny

mini bucket

A Whole-Ass Pie Earrings

Bar Keepers Friend Lid - Airtight Seal - BKF (Barkeepers) Can / Tin - JCreateNZ

Fancy box

Altoids Tin Organizers

crumpled tin can pot (NO SUPPORT)

Tin Can

Altoids tin micro sd card holder

Decorative box hinged

Heinz Bean Tin Can Stacker

Soldering wire stand (Print in place)

zoids pencil holder1.stl

Plastic Wrap / Tin Foil Holder