The radial fins on these vases create interesting effects when printed with multcolor filament. Be sure to print in “Vase” or “Spiralized” mode!

See here for video: https://youtu.be/t0Jmu4c5U6Y 
 
This download includes small, medium, and large versions. The model shown is the “Small” design.

See here other multicolor vase designs:
Stinkhorm Vase https://than.gs/m/912791 


Fin Vases Square

Fine Vase Square Small.stl

This tree-shaped decoration is part of a set of three that features different mathematical Triply Periodic Minimal Surfaces. The bottom can be left open for use as an electric tealight cover or decoration, or you can use the threaded insert to hold objects inside. 

See here for video: https://youtu.be/5yMM924_57E 

See here for others in the series:
Gyroid: https://social.thangs.com/m/503650 
Diamond: https://social.thangs.com/m/503651 
Fischer Koch S: https://social.thangs.com/m/503653 



TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

TPMS Tree (Diamond)

TPMS Tree (Diamond).stl

These snap-together star pieces are designed to be printed in “vase” or “spiralized” mode for maximum optical clarity. This is a great print for your translucent filament!
 
See here for video: https://youtu.be/nqcK2OIDcJc 

Twelve “Basic Point” pieces snap together to form a 12-pointed star. The “Long Point” can substitute for any of the “basic” point pieces to add some variety. The “Base” can hold a standard LED tealight or function as a tree-topper.

For those interested in the mathematics behind this design, this star forms a small stellated dodecahedron, Kepler-Poinsot polyhedron and one of only four nonconvex regular polyhedra. Each of the “Basic Points” is a “Golden Pyramid,” meaning the ratio of the sides is the Golden Ratio (phi). Fully assembled, there are in fact three powers of the Golden Ratio contained within the small stellated dodecahedron. 

There are two versions of the “Basic Point,” a “Loose” and “Tight.” Given differences in materials, printers and settings, you may find that one works better than the other. 

These must be printed in in “vase” or “spiralized” mode in order to work! Ideally, print them without a bottom by setting “Bottom Layers” to zero in your slicer. Printing them with a bottom may still work but they will be harder to assemble and the optical clarity will not be as good.


Snap Star

Snap Star Display only do not print.stl

Set of 10 Mystical Candle Holders
Easy to Print
Pick your own colours
Printed in Sunlu Silk Filament. Light Gold, Red Copper, Silver and Black

Link to LED Tealight Candles that I used, https://www.ebay.com.au/itm/125607558844?_trkparms=amclksrc%3DITM%26aid%3D777008%26algo%3DPERSONAL.TOPIC%26ao%3D1%26asc%3D20240207182925%26meid%3D8f021d3077314d45a639f459dc20b2a6%26pid%3D101967%26rk%3D1%26rkt%3D1%26itm%3D125607558844%26pmt%3D1%26noa%3D1%26pg%3D4375194%26algv%3DPersonalizedTopicsV2WithSizeMskuNukvPursup_BP%26brand%3DUnbranded&_trksid=p4375194.c101967.m162920&_trkparms=parentrq%3A27c2c7ae1960a6258c2d6485ffffceaa%7Cpageci%3A3c2487d3-1743-11f0-8da4-a2a8c10039d0%7Ciid%3A1%7Cvlpname%3Avlp_homepage&var=426640605621

Mystical candle holder set

Mystical candle holder 3.stl

This “Truss Tree” is part of a set of four tree-shaped decorations featuring a selection of architectural truss systems. The bottom can be left open for use as an electric tealight cover or decoration, or you can use the threaded insert to hold objects inside. 

See here for video: https://youtu.be/VxIjycsYUqo

The models shown are printed with the following types of tricolour silk filament by Eryone:
Flourite: Red & Yellow & Blue”
Diamond: “Red & Blue & Green”
Truncated Octahedron: “Red & Gold & Purple”
Kelvin: “Gold & Silver & Copper”

Other designs in the set:
Diamond: https://social.thangs.com/m/475642 
Flourite: https://social.thangs.com/m/475644 
Kelvin: https://social.thangs.com/m/475645 
Truncated Octahedron: https://social.thangs.com/m/475646



Truss Tree (Kelvin)

Truss Tree Kelvin.stl

Truss Tree (Diamond)

Truss Tree Diamond.stl

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ

Here are links to other Tealight Holders in the set:

Derived from Fischer-Koch S TPMS: https://social.thangs.com/m/98554 
Derived from the Schoen Gyroid TPMS: https://social.thangs.com/m/98555 
Derived from the Schwarz P TPMS: https://social.thangs.com/m/98556 
Derived from the Schwarz D TPMS: https://social.thangs.com/m/98557 
Derived from the Kelvin lattice: https://social.thangs.com/m/98558 
Derived from the truncated cube lattice: https://social.thangs.com/m/98559 
Derived from the octet lattice: https://social.thangs.com/m/98560 
Derived from the truncated octahedron lattice: https://social.thangs.com/m/98561 



Truncated Octahedron Tealight Holder

This design is part of a set of Tealight Holders derived from mathematical surfaces and lattices. 

The Tealights will print without supports, but you may want to ensure your machine is well calibrated for bridging and that you are getting good layer adhesion.

See here for video: https://youtu.be/ApTyuPGk7EQ


Octet Tealight Holder

Truncated Cube Tealight Holder

Tructated Cube Tealight

These cute RGB light - cat ears easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. 

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. The inserts are fixed easily with a drop of superglue. 

I use mini tea RGB lights from amazon. You have to use exactly the ones with the clamp that holds the 2x batteries in place. Other models might not work! The PCB of this tea light is 25mm in diameter and fits inside the cat ear. Happy printing!

**RGB lights:** https://amzn.eu/d/2YRpkri
**Good quality velcro cable tie:** https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

Youtube Video showing the RGB cat ears in action: https://youtu.be/bsbgUmyBiLE

**Check my profile for more designs!**


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.



**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Top surface pattern concentric
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from basic Black and White PLA
-No supports needed! 
-STL files already correctly aligned!

RGB Light Cat Ears for Headphones

cat_ears_001c_RGB_light_v12.stl

Kelvin Tealight Holder

Kelvin Tealight

Schwarz D Tealight Holder

Scwarz D Tealight Holder

Schwarz P Tealight Holder

Gyroid Tealight Holder

Fischer Koch S Tealight Holder

These dual-color cracked vase designs can be printed with translucent filament to let the light shine through the cracks! The distribution of cracks gives the appearance of a bullet hole through the vase.

See here for video: https://youtu.be/iKBhvfeoSeM 

Download the set:
Small: https://than.gs/m/887994 
Medium: https://than.gs/m/887997 
Large: https://than.gs/m/887999 



Bullet Hole Vase (Small)

Vase 50x50.stl

These light covers are designed for dual or multicolour printing. Select a translucent filament for the “diamonds”, and an opaque filament for the “stone.”
 
See here for video: https://youtu.be/yS2cwrVehUk 

In order to optimize the optical clarity of the “diamonds,” this portion of the model should be printed with just a single wall thickness and with “top layers” set to zero. Bottom layers can be zero or more depending on your preferences.

Each size has a unique diamond configuration. 

Small: https://than.gs/m/838952 
Medium: https://than.gs/m/838955 
Large: https://than.gs/m/838956 



Diamonds in the Rough (large)

Large Display only do not print.stl

These light covers are designed for dual or multicolour printing. Select a translucent filament for the “diamonds”, and an opaque filament for the “stone.”

See here for video: https://youtu.be/yS2cwrVehUk 

In order to optimize the optical clarity of the “diamonds,” this portion of the model should be printed with just a single wall thickness and with “top layers” set to zero. Bottom layers can be zero or more depending on your preferences.

Each size has a unique diamond configuration. 

Small: https://than.gs/m/838952 
Medium: https://than.gs/m/838955 
Large: https://than.gs/m/838956 



Diamonds in the Rough (medium)

Medium Display only do not print.stl

These tree decorations are printed in “spiralized mode.” Printing in spiralized mode is fast, uses less material, and gives you the best optical quality for your translucent filaments.

See here for video: https://youtu.be/cXp54iDL20g 

The bottom fits a standard electric LED tealight.

Each set include four styles of trees: small and straight, small and curved, large and straight, large and curved.

This set has ornaments: https://social.thangs.com/m/528318 
This set is without ornaments: https://social.thangs.com/m/528337 



Tree Lights (Without Ornaments)

Without ornaments display only do not print.stl

🍂 It's cozy vibes season, so I made a tiny pumpkin and added a little twist to it (literally!).

Featuring a twist lock that holds your tealight. 
3mf files optimized & ready-to-print



Twisted Pumpkin Tealight

Printzee_TwistedPumpkinTealight.3mf

The final drop of the month is a tealight home village! I realize that this is a little different from what we are used to, and I hope that is okay! Once I printed the first one I really loved the simple look! The homes don't need any sort of assembly, just throw on the printer, stick an LED tealight in there and you're done! They can be used year round as well!

Super easy prints! No supports, the homes can print with 0% infill, minimum 2 walls. I included 3MF files for bambu slicer with fuzzy skin option. If you are scaling the homes up make sure that you change your bottom shell layers to 10 (if you are using creality slicer you should be doing this on 100% scale models as well)

the tree should be glued together at the base and the peak

You can open the doors a little by heating them up at the hinges and pushing them open.

⭐As with all of my designs, I strongly advise that the printed models are not to be handled by children under 3 without proper supervision⭐
+
+
📌This model is for PERSONAL USE ONLY, to sell prints of these designs you will need to SUBSCRIBE TO THE MERCHANT PLAN available on my profile page - [Click here](https://thangs.com/designer/Layersingreen)📌 

All of my designs are created from scratch by me in blender3d. I do not use AI for any part of my creative process ✌️❤️

[free] Tealight village with tree

Tealight_home_one.stl

This is a free, simplified version of Candlelight Valley. You can find the [full version](https://than.gs/m/1267884?affiliateCode=MAKE) with more props and options [here](https://than.gs/m/1267884?affiliateCode=MAKE).

**_TAKE CARE!_**  Different candles and different filaments may affect safety. Ensure that your candles will not soften the holder and increase fire risk. Do not leave unattended.

---

A soft warm light washes over the calm meadows of Candlelight Valley. This miniature scene adds coziness to any space. The base is a functional container as well! 

---

_**PRINTING GUIDELINES**_

- The _Valley_ part is designed to be printed in Spiral Vase mode along with Fuzzy Skin settings. Two versions included for 38mm and 40mm candle diameters. For extra strength you can increase extrusion width to 0.6mm. For the Fuzzy Skin, I suggest 0.25mm point distance and 0.5mm skin thickness, and 0.24mm layer height. Vase mode isn't necessary, it just prints quickly and cleanly. There is a steep overhang for the candle indentation, which is likely to cause a hole... but that's okay, we all have holes, and the candle itself will hide that!


- The _Base_ can be printed using default print settings. The included standard _Base.stl_ has a minimum inside clearance of 18mm.

- The _Tree_ is designed for printing in Fuzzy Skin mode. 1 perimeter, 0% infill. Fuzzy Skin is optional and different settings can produce different nice results, but I generally used 0.5mm point distance, and 1mm skin thickness.

---

Photographed model was printed using  [Bambu Lab PLA Basic (Bambu Green)](https://bit.ly/bamFIL) ([3DJake](https://tidd.ly/3XwZY5p)) and [Panchroma Army Green PLA](https://us.polymaker.com/products/panchroma-matte?variant=43631458549817&aff=193) ([Amazon](https://amzn.to/42HQ5pY))*

*_These affiliate links give me a commission on sales at no additional cost to you. Thanks for supporting Make Anything!_*. 


Candlelight Valley (Simple)  // Miniature Landscape Tealight Candle Holder

Valley_40mmPlain.stl

Discover a unique way to make your Halloween decorations stand out this year with the Tealight Pumpkin 3D model listed on Thangs.com by designer cbobo2uco. The Tealight Pumpkin 3D model is a part of the Seasonal/Halloween category, perfect for those looking to inject some festive spirit into their decor. Offering two sizes, a large and small, these decorative pumpkin designs hold a standard-sized LED tealight adding an enchanting glow to your festivities.

Detailed and realistic, the pumpkin models require supports for a seamless printing experience, however, their stems do not, making the process straightforward and efficient. These designs have been prepared with a 5-degree threshold angle for tree supports, ensuring optimal stability and precision in the final output.

Be it for your front porch or a Halloween-themed party, this 3D Tealight Pumpkin model will surely capture everyone's attention and set the mood. The designer's image gallery showcases the brilliant result of the 3D printed pumpkins, encouraging users to experience the model's spooktacular appeal.

Explore Thangs.com for imaginative and dynamic 3D designs like this Tealight Pumpkin model and add a touch of 3D creativity to your Seasonal/Halloween decorations.

TeaLight

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Fin Vases Square

TPMS Tree (Fischer Koch S)

Snap Star

Mystical candle holder set

Truss Tree (Kelvin)

Truncated Octahedron Tealight Holder

RGB Light Cat Ears for Headphones

Bullet Hole Vase (Small)

Diamonds in the Rough (large)

Tree Lights (Without Ornaments)