Print in Place Leopard 2A6 toy tank that I’ve built from scratch. The tank is printable without supports (a support block for the barrel is integrated in the STL file). The wheels and turret can rotate easily. I also made a compatible transport wagon (for BRIO / IKEA / .. tracks) see the link below.

**Check out my toy trains with wagons and have fun printing :)**
https://cults3d.com/en/design-collections/technerd/lovely-toy-trains

Thanks for the inspiration with the support block and pivot link from Waikikiprod!
Check out their fantastic tank design: https://www.printables.com/model/401897-tank-toy-print-in-place

**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Youtube link to the video of this design:
https://youtube.com/shorts/Ucwwbc5ZrTw?feature=share

I used Prusa Slicer with Prusament Army Green PLA for printing. 3MF files included. Print as imported into the buildplate. No supports needed.

Toy Tank Leopard 2A6 Print in Place

tank_leopard_2a6_pip_001.stl

**New Profoto Gel Holder V2**
Print out the stencil template and simply cut your gels to size. Attach the color gels with the quick release gel holder ring. Attach the gel holder to your Profoto flash. Compatible with Profoto D1, D2, D3, B1, etc.

The gel holder has bumpers inside to allow air to circulate when the holder is mounted. To be on the safe side, I would still recommend turning off the modeling light when using this gel holder!

For demonstration purposes, I printed the inner ring in white PLA. The 3MF files are optimised for Bambu Lab printers!

**Watch the YouTube video for easy assembly:**
https://youtu.be/QAn7fodU_ug


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.


Profoto Gel Holder V2

Profoto_Gelholder_002.stl

The Streamliner Toy Train with a lovely designed wagon (compatible with tracks from BRIO / IKEA, WOODEN THOMAS) and very easy to print. Assembly with only a few wood screws of the same type. 

**For 1 wagon or train you will need the following screws:**
12x ISO 14585 (DIN7981) diameter 2.9mm x length 13mm (https://amzn.to/3WgKty1)

**Add cheap neodym ring magnets on each side of the train:**
2x Neodym ring magnet R-10-04-05-N outer diameter 10mm / inner diameter 4mm / height 5mm (https://amzn.to/3YdC6G4)
I may earn a commission on qualifying purchases (at no extra cost to you)

**Check out my other toy trains! Enjoy! :)**
https://cults3d.com/en/design-collections/technerd/lovely-toy-trains
https://cults3d.com/en/users/technerd

**What others say:**
*What a great model, the design is perfect. Prints great and easy to assemble. And the little one is absolutely stoked!* 
*Lovely model and a very easy print. Thank you so much!*
*Very nice brio/ikea compatible train. My son enjoys it every day!*

**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Youtube link to the video of this design:
https://youtube.com/shorts/92zdBFqjcT0?feature=share

Streamliner Toy Train BRIO IKEA compatible

streamliner_train_001b.stl

These cute RGB light - cat ears easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. 

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. The inserts are fixed easily with a drop of superglue. 

I use mini tea RGB lights from amazon. You have to use exactly the ones with the clamp that holds the 2x batteries in place. Other models might not work! The PCB of this tea light is 25mm in diameter and fits inside the cat ear. Happy printing!

**RGB lights:** https://amzn.eu/d/2YRpkri
**Good quality velcro cable tie:** https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

Youtube Video showing the RGB cat ears in action: https://youtu.be/bsbgUmyBiLE

**Check my profile for more designs!**


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.



**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Top surface pattern concentric
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from basic Black and White PLA
-No supports needed! 
-STL files already correctly aligned!

RGB Light Cat Ears for Headphones

cat_ears_001c_RGB_light_v12.stl

I played around a bit with other design ideas and came up with these fantastic cosplay Demon horns! 3mf file is optimised for Bambu Lab printers with included tree-supports and support blocker, ready to print. Enjoy!

These easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. 

**Want to see more demon horn designs? Check out my profile.**

**Good quality velcro cable tie:** https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**Copyright:**
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Demon Horns Amazing Texture

horn_001_left.stl

These cute fox ears easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming.

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

-Easy to print - no supports needed!
-The insert is easily fixed with a drop of super glue to stay in place

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from basic white and orange PLA
-No supports needed!
-STL files already correctly aligned!
-3MF Bambulab file included! No AMS needed!
-Ironing topmost surface for better quality (optional)

Cute Fox Ears for Headphones

fox_ears_001.stl

These cute demon horns easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. 

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

**-Integrated supports to get perfect results and are easy to remove!**

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**Need more designs? Check out my collection:**
https://cults3d.com/en/design-collections/technerd/cosplay-ears-horns-etc



**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.



**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from Matte Sakura Pink PLA
-No supports needed, already integrated!
-STL files already correctly aligned!
-Bambulab 3MF file only for paid Patreon members!

Anime Demon Horns for Headphones Cosplay

demon_anime_horn_002_left.stl

These cute cat ears easily attaches to any pair of headphones with a simple velcro cable tie (length: 150mm / width: 12mm) that you can cut to your liking. They add a unique factor to your live stream or while gaming. I also have a version with integrated LED lights!

They can also be easily attached to a wide headband. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself. The inserts are fixed easily with a drop of superglue. Try different color combinations. Happy printing!

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**My other models, Cat Ears with integrated RGB light:**
https://cults3d.com/en/creations/rgb-light-cat-ears-for-headphones

**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-2 wall loops
-Top surface pattern concentric
-Sparse infill density 8%
-Sparse infill pattern gyroid
-I made it from Black and Pink PLA
-No supports needed! 
-STL files already correctly aligned!

Cute Cat Ears for Headphones

cat_ear_001b.stl

These cute LED RGB light - bunny ears easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming. 

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

-Easy to print - no supports needed!
-The pink or black inserts are easily fixed with a drop of super glue to stay in place
-3MF file is optimised for Bambu Lab printers, ready to print
-STL files are correctly oriented 

I use mini tea RGB lights from amazon. You have to use exactly the ones with the clamp that holds the 2x batteries in place. Other models might not work! The PCB of this tea light is 25mm in diameter and fits inside the bunny ear. Happy printing!

**RGB lights:**
Amazon DE link: https://amzn.eu/d/2YRpkri

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**Need more designs? Check out my collection:**
https://cults3d.com/en/design-collections/technerd/cosplay-ears-horns-etc


**Copyright:**

All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.
 
**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.


**For best results print as follows:**
-0.2mm layer height
-Arachne generator
-3 wall loops
-Sparse infill density 7%
-Sparse infill pattern gyroid
-Basic white or black PLA and matte sakura pink PLA
-No supports needed!
-STL files already correctly aligned!

LED Cute Bunny Ears Cosplay

bunny_ears_002_rgb_v9_left.stl

**My new set of Aries - demon horns. They turned out amazing!**

These easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming.

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

**3MF file is optimised for Bambu Lab printers with included tree-supports and support blocker, ready to print. STL files also included and correctly oriented. **

**Good quality velcro cable tie:**
https://amzn.to/3LkGhrO
I may earn a commission on qualifying purchases (at no extra cost to you)

**3d printing settings:**
-2 Walls
-15% Lightning Infill
-Automatic Tree Supports

**Copyright:**
All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds.

**If you want to sell my prints commercially and legally, please join my Patreon:**
https://www.patreon.com/technerd863
The digital files (STL and other formats) may never be resold, shared, remixed or given away.

Aries Demon Horns

aries_demon_horns_left.stl

These cute devil horns easily attaches to any pair of headphones with a simple (12mm wide) velcro cable tie that you can cut to your liking. They add a unique factor to your live stream or while gaming.

They can also be easily attached to a wide headband for cosplay. They are lightweight and comfortable while attached to your headset. A wonderful gift for someone special on holidays, birthdays or as a gift for yourself.

-Fuzzy Skin is activated because I liked the texture it produces! If you don't like it just put it to NONE!
-Integrated supports to get perfect results and are easy to remove!

 Devil Horns for Headphones

devil_ears_001_v8_supports.3mf

**You get:**

- **Access to all** my published designs in this membership at once!
- A **commercial use license**, you are authorized to sell my printed models. Please read the Terms &amp; Conditions.
- **Access to all my product pictures** to use in your own e-commerce store

**Terms &amp; Conditions:**
Sharing or selling any digital files obtained from me is strictly prohibited. Only 3D printed models may be sold. Casted models are also allowed.

TechNerd must be credited as the designer, a short mention is sufficient.

**This license is only valid while subscribed** to a membership that includes a commercial license. If the license is lost, the sale of my printed models must be stopped immediately.

Commercial Gold

aries_demon_horns_2x.3mf

aries_demon_horns_right.stl

cat_ears_001c_RGB_light.3mf

insert_002c_corner_brims.3mf

insert_001c.stl

insert_002c.stl

threaded_cap_001.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

TechNerd_official

Achievements

Seedling

Debutant

Pinned models

Aries Demon Horns

RGB Light Cat Ears for Headphones

Toy Tank Leopard 2A6 Print in Place

Profoto Gel Holder V2

Streamliner Toy Train BRIO IKEA compatible

RGB Light Cat Ears for Headphones

Demon Horns Amazing Texture

Cute Fox Ears for Headphones

Anime Demon Horns for Headphones Cosplay

Cute Cat Ears for Headphones

LED Cute Bunny Ears Cosplay

Aries Demon Horns

Devil Horns for Headphones