This ClampDock Accessory has two fold-down hooks to suitable for hanging a wide range of things, including light garments, keys, glasses, dog leash and collar, etcetera.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  

The two hooks print separately and snap into the main body.  

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Folding Hooks

ClampDock Folding Hooks 1v00a large hook.stl

This general use pocket is approximately 60mm wide, 40mm deep and 100mm high. 
 It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy. 

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Pocket 60Wx40Dx100H (for pens, glasses, remote, etc)

ClampDock 1v00a Small Pocket.stl

The Kitsch Cake Book Stand holds your pages open, provides secret storage, and adds a fabulous touch to any space. Lift the removable lid to reveal a hidden compartment perfect for stashing glasses, hair ties or bobby pins, keeping your nightstand neat and clutter free. It also adds a playful touch to coffee tables or end tables. Ideal as a gift for any book lover!

**With options for both AMS and non-AMS printing, it's flexible and easy to assemble!**

**Print Settings**
- Add a brim to prevent curling along the edges
- No supports needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height

**PLA Used:**
- Jelly Red: https://amzn.to/4jlO34i or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-jred
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Blush Pink: https://amzn.to/4lEBnad or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-blpnk
- Sea Breeze: https://www.hatchbox3d.com/products/hb-pla-1kg1-75-sbrz

**Assembly Video:** https://youtu.be/kdfV9wU0PJs

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

pixelandpapier__cake_book_stand__cake.stl

This remote control holder has 3 “slots” in it.  Two of them are deep and one is less so.  The dimensions of the openings for the remote controls are shown in the illustration.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Multi-Remote Holder

ClampDock 1v00a multi remote.stl

This mug holder snaps onto the ClampDock, allowing you to attach a mug holder to a wide range of furniture edges. 

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.  

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Mug Holder

ClampDock 1v00a mug holder 100mmID.stl

This will definitely make the party goers think twice before grabbing your goods. Printed in parts for ease of color changes. 

The Metal part of the handle needs supports but everything else prints support free. Make sure to add some extra external layers for the blade or it gets a little wobbly. 

Private Use Only.

Become a Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!


Bloody Knife Bowl

Knife Bowl - Bowl.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
_______________________

The EdgeMetal Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4g88Hn8) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

**INSTRUCTIONS**
• Print the model laying face up, no supports needed
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Faceplate - EdgeMetal

EdgeMetal - Single - 44mm Handle.stl

Make measuring your small parts (and knowing where your calipers are) a little bit easier with this <1 hour print that gives you calipers both a place to be stored and also to be used one-handed!

I used PETG for the right balance of grip and rigity but I'm sure PLA would also work well. 

Dojo Desktop Caliper Mounts

Dojo Desktop Caliper Mounts_Front Facig_0420_52_1440_001.stl

This cozy little living room set was made to bring midcentury charm to your miniature scenes. It includes two statement chairs (a miniature cane cantilever chair and a sculptural cocoon chair) alongside a coffee table and side table.

Each piece features soft curves and midcentury inspired lines, designed to mix and match with other 1:12 scale furniture. Whether you're building out a dollhouse, diorama, or a cozy book nook display, this set adds just the right touch of retro comfort.

**No AMS? No problem! I've designed it to work with both AMS and non-AMS printers!**

**Print Settings:**
If you'd like to see the orientation and settings of the print, please take a look at the .3mf file.

_Cane Cantilever Chair_
- No brim needed
- No supports needed
- 100% infill for the leg frame, 15% infill everywhere else
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2mm layer height

_Cocoon Chair_
- No brim needed
- No supports needed
- 60% infill for the pedestal base, 15% infill everywhere else
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2mm layer height

_Coffee and End Table_
- No brim needed
- No supports needed
- 15% infill
- 2-3 walls
- 0.4mm nozzle
- 0.12 - 0.2mm layer height

**PLA Colors:**
- Applesauce: https://amzn.to/3RmjTBw or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-apsc
- White: https://amzn.to/3FORvWl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-wht
- Butter Yellow: https://amzn.to/4jAvsBl or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-mat-bylw
- Metallic Finish Brown: https://amzn.to/3XJFnMi or https://www.hatchbox3d.com/products/3d-pla-1kg1-75-shny-brn
- Wood: https://amzn.to/4i6uYla or https://www.hatchbox3d.com/products/3d-wood-1kg1-75
- Wood Brown: https://amzn.to/4idTqBd or https://www.hatchbox3d.com/collections/pla-1-75mm/products/3d-wood-1kg1-75-brn-b075dyqkq9

**Assembly Video:** https://youtu.be/Hq-uz4rXF0Q

**Important Note: Not suitable for young children. Contains small parts that may pose a choking hazard.
**


Midcentury Miniature Living Room Furniture Set – Cane Chair, Cocoon Chair, Tables, 1:12 Scale

pixelandpapier__mini_living_room_set__AMS.3mf

pixelandpapier__mini_living_room_set__cane_chair_cane.stl

Protect your table in style with these groovy vinyl coasters! Featuring five retro inspired designs that pay tribute to your favorite records, they’re sure to keep your drinks secure and your table protected. Whether you use an AMS printer or not, these coasters look fantastic either way. Add rubber feet for extra grip and they'll stay perfectly in place while safeguarding your surfaces. It is your table’s new best friend!

**With options for both AMS and non-AMS printing, it's flexible and easy to assemble!**

**Print Settings**
- No brim needed
- No supports needed
- 10% infill
- 2-3 walls
- 0.4mm nozzle
- 0.2mm layer height
 Use 3MF file if you want to use your AMS

**PLA Used**
- Orange: https://www.matterhackers.com/store/l/listing/sk/ME4CUFC6?aff=7646
- Dark Yellow: https://amzn.to/4fEIxYf
- Black: https://www.matterhackers.com/store/l/pro-series-pla/sk/MY6C8H7E?aff=7646
- Terracotta: https://www.matterhackers.com/store/l/pro-series-pla/sk/MZEZCLYH?aff=7646
- Anti-Slip Bumpers: https://amzn.to/41ogdnv

**Assembly Video:** https://youtu.be/XpxMVzRrISg

Retro Vinyl Record Coasters – 5 Unique Designs, No AMS Required, Groovy, Table Protector, Decor

pixelandpapier__vinyl_coaster__coaster_base.stl

This general-use pocket is approximately 100mm wide, 40mm deep and 100mm high. 
 It is suitable for pens, glasses, or anything else that fits in it and you want to keep handy. 

This pocket is similar too but larger than the original pocket posted here…
https://than.gs/m/1256849

This pocket snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.



ClampDock Accessory - Pocket 100Wx40Dx100H

ClampDock Group A 1v00b rect pocket 100x40x100.stl

This Folding Soda Holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold standard-size soda, beer or beverage cans and fold it up when not needed.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.

ClampDock Accessory - Folding Soda (Drink) Holder

ClampDock Folding Soda 1v00a main.stl

This a general purpose charging tray large enough for phones and tablets together.  It snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it for charging or as a stand for your devices.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.




ClampDock Accessory - Charging Tray

ClampDock charging tray 1v00a.stl

This multi-purpose accessory snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.  You can use it to hold or hang keys, glasses, hats, a wallet, a phone or anything else that fits it.

This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

100% printed, no hardware, fasteners or adhesives are required.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs:
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Keys, Glasses, Hat, Wallet, Phone Holder

ClampDock hat-keys-glasses 1v00a.stl

This soda can holder snaps onto the ClampDock (download separately), allowing you to attach it to a wide range of furniture edges.

———————
This accessory snaps onto the ClampDock (download separately), allowing you to attach this accessory to a wide range of furniture edges.

100% printed, no hardware, fasteners or adhesives are required.

This download contains the ClampDock Accessory only.  You must download the ClampDock separately.

**Print Settings**

For the best results, I suggest the following:
Material = PLA / PETG
Nozzle = 0.4mm
Layer Height = 0.2mm
Line Width = 0.4mm
Wall Count = 4 (1.6mm)
Top and Bottom Layer Count = 5
Detect Thin Walls = ON
Wall Generator = Arachne
Infill = 40% (Cubic)
Brim = Should not be needed 
Support = No
Print orientation = As per the STL/3MF files.

**Related Links**

The ClampDock is available here…
https://than.gs/m/1256833

The collection of ClampDock compatible accessories is available here… 
https://thangs.com/mythangs/collections/132194

Visit my blog for more details and other designs: 
https://www.logicalplanet.com/

**Revisions and Updates**
I occasionally update and revise my designs. When I do, I’ll document the changes here. Check back periodically for the latest revision notes or if you’re experiencing any issues with a model.


ClampDock Accessory - Soda Can Holder

ClampDock 1v00a soda holder 68mmID.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for instructions and a complete look at the GEN2 collection.
_______________________

The EdgeLabel Series is a collection of modular drawer faceplates for the GEN2 Decor Series. These faceplates are designed to make labeling drawers simple while adding a clean, modern handle style that pairs nicely with the original GEN2 drawers.

V1.3 has been redesigned from the ground up to print faster, use less material, require less bridging, and install more easily. Accent pieces now attach using new mini dovetail clips instead of full-length rails, making larger faceplates much easier to assemble. The faceplates also snap into place more securely, with new locking clips available for upcoming v2602 Decor Drawers as an alternative to using M3 screws.

The EdgeLabel Series is designed to be easy to customize, whether you are using a multicolor 3D printer or a single-color printer with filament swaps. Print the accent pieces face down on a textured build plate for a great finished look, then add your own text, icons, or color combinations to match your setup.

Try it out first for free [⬇HERE](https://than.gs/m/1292349)

**V1.3 Compatibility Notes**

• Main EdgeLabel faceplates are fully backwards compatible with all GEN2 Decor Drawers.  
• New optional Faceplate Back Covers are only compatible with the upcoming v2602 Decor Drawers.  
• Some sizes are being made available ahead of the full v2602 Decor Drawer release.  
• New locking clips are designed for v2602 Decor Drawers and can be used as an alternative to M3 screws.  
• Many new sizes have been added, including support for larger drawer sizes such as 4W-2H.

**What You'll Need**

Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of compatible GEN2 Decor Drawers.

**HARDWARE**  
_Includes affiliated links to help support my projects_

• Filament - PLA, PETG, or your preferred decorative filament  
• Optional M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)  
• Optional locking clips for compatible v2602 Decor Drawers  

Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**

---

## UPDATES

**UPDATE V1.3 (5-13-2026)**

• Faceplates have been redesigned from the ground up.  
• Redesigned to print faster, use less material, and require less bridging.  
• Accent pieces now attach using mini dovetail clips instead of full-length rails, making installation easier on larger faceplates.  
• Faceplates snap into place more securely.  
• New locking clips are compatible with v2602 Decor Drawers as an alternative to using M3 screws.  
• Optional Faceplate Back Covers added for upcoming v2602 Decor Drawers.  
• Many new sizes added, including larger drawer sizes such as 4W-2H.  

*Main faceplates are fully backwards compatible with all GEN2 Decor Drawers. Optional Faceplate Back Covers require v2602 Decor Drawers.*

**UPDATE V1.2 (3-15-2025)**

• This update introduced even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.  
• Print accent pieces face down on textured plates for outstanding results.

**UPDATE V1.1 (1-20-2025)**

• This update removed the M3 nut slot and instead uses a new self-tapping hole for M3 screws.  
• Divided the faceplates to allow for an optional additional color if desired. This can also be toggled or modified for fun appearances.

---

## INSTRUCTIONS

See attached instructions.

GEN2 Decor - Faceplate - EdgeLabel

1w-3h-accent.stl

1w-3h-back-cover.stl

2w-1h-accent.stl

2w-1h-back-cover.stl

2w-2h-accent.stl

2w-2h-back-cover.stl

2w-3h-accent.stl

2w-3h-back-cover.stl

2w-05h-back-cover.stl

2w-15h-accent.stl

2w-15h-back-cover.stl

3w-1h-accent.stl

3w-1h-back-cover.stl

3w-2h-accent.stl

3w-2h-back-cover.stl

3w-05h-back-cover.stl

3w-15h-accent.stl

3w-15h-back-cover.stl

4w-1h-accent.stl

4w-1h-back-cover.stl

4w-2h-accent.stl

4w-2h-back-cover.stl

4w-05h-back-cover.stl

4w-15h-accent.stl

4w-15h-back-cover.stl

edgelabel-1w-2h.3mf

edgelabel-1w-3h.3mf

edgelabel-1w-3h.stl

edgelabel-2w-1h.3mf

edgelabel-2w-1h.stl

edgelabel-2w-2h.3mf

edgelabel-2w-2h.stl

edgelabel-2w-3h.3mf

edgelabel-2w-3h.stl

edgelabel-2w-05h.3mf

edgelabel-2w-05h.stl

edgelabel-2w-15h.3mf

edgelabel-2w-15h.stl

edgelabel-3w-1h.3mf

edgelabel-3w-1h.stl

edgelabel-3w-2h.3mf

edgelabel-3w-2h.stl

edgelabel-3w-05h.3mf

edgelabel-3w-05h.stl

edgelabel-3w-15h.3mf

edgelabel-3w-15h.stl

edgelabel-4w-1h.3mf

edgelabel-4w-1h.stl

edgelabel-4w-2h.3mf

edgelabel-4w-2h.stl

edgelabel-4w-05h.3mf

edgelabel-4w-05h.stl

edgelabel-4w-15h.3mf

edgelabel-4w-15h.stl

1w-1h-accent.stl

1w-1h-back-cover.stl

1w-2h-accent.stl

1w-2h-back-cover.stl

1w-05h-back-cover.stl

1w-15h-accent.stl

1w-15h-back-cover.stl

edgelabel-1w-1h.3mf

edgelabel-1w-1h.stl

edgelabel-1w-2h.stl

edgelabel-1w-05h.3mf

edgelabel-1w-05h.stl

edgelabel-1w-15h.3mf

edgelabel-1w-15h.stl

label-v13.stl

label-v13-bambu.3mf

label-v13-prusaslicer.3mf

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 

These are the original Fusion 360 CAD files uses to create the GEN2 Adjustable Steel Sheet Holder.

GEN2 Steel Sheet Holder CAD Files

Sheet Holders.3mf

The Most complete set for creating your own medieval house!

The House Set includes:
- +70 Models
- 2 PDF Maps 90x60cm (grid & gridless)
*CNP WALLS SYSTEM*


*Latest update: November 7th, 2022

Models and Updates List:
https://docs.google.com/spreadsheets/d/1nhZK3T4H8tMsFjZtP9nbJ1Vyyuo4FwO6xzfTyP6h-WU/edit?usp=sharing


Join us on Patreon to stay on top of our newest releases and get our exclusive welcome pack.
https://www.patreon.com/castnplay

Medieval House Set (Pre-Supported)

Sink.stl

Table

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

ClampDock Accessory - Folding Hooks

Kitsch Cake Book Stand with Hidden Storage - Nightstand Decor Ideal Gift for Book Lovers

Bloody Knife Bowl

GEN2 Decor - Faceplate - EdgeMetal

Dojo Desktop Caliper Mounts

Midcentury Miniature Living Room Furniture Set – Cane Chair, Cocoon Chair, Tables, 1:12 Scale

Retro Vinyl Record Coasters – 5 Unique Designs, No AMS Required, Groovy, Table Protector, Decor

GEN2 Decor - Faceplate - EdgeLabel

Medieval House Set (Pre-Supported)