Plastic mallet

Ultimate Screwdriver (an overly engineered gag gift)

Ultimate Screwdriver - Display Only Do Not Print.stl

Flywheel puller for Kuryaka flywheels (Daybreak, Kepler, Pulsar)

3D printable piece, designed to work with the flywheel puller metal part made by Fetteworst, to pull any Daybreak, Kepler or Pulsar wheels (or any other wheels with the same top geometry) off a motor shaft, without risking bending the motor shaft, or applying force to the flywheel cage.

Metal part can be found here: https://www.etsy.com/listing/744330014/nerf-flywheel-puller

Flywheels are sold by Kuryaka through Etsy, and various resellers (FoamBlast, Out of Darts, Blaster-Time.eu, ...): https://www.etsy.com/shop/KuryKafe

M5 hex nut included with this should be a nice friction fit in the printed part.
Slip over top of flywheel, rotate metal part (internal hex driven) to pull the flywheel straight up off the motor shaft.

Nickel Strip Dispenser

I bought this nickel strip (https://amzn.to/2ZvNL4v) from amazon to build some batteries, and I realized that if I took it out of the wrapping it would completely uncoil. So I made a simple holder for it, so It dispenses easily. No supports needed, I figured this might save someone else a bit of time!

Wire Staple Holder

This is something I made for my work, to help hold staples with magnets while you hammer them in. Sometimes it's really a pain in the rear to hold the staple and wire and hammer it into the wall all at the same time. A normal 12/2 or 14/2 staple should fit in the grooves just right so you can hit it with your hammer and not worry about smacking your hand or the staple falling.

These are the magnets I used for this device (you can also find them on banggood.com, 2x10x20mm magnets):

https://amzn.to/3dFwZnV

Die Filer (WIP!!!)

Letterpress Quoin

Judge Dredd Movie Style Helmet

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
_____________________________________________

Judge Dredd Movie Style Helmet

This helmet is based off the 2012 movie

Hope you enjoy. 

Side notes- This can be printed upside down for minimal supports.
** If your printer or settings weld your support to prints i dont recommend this. **

_____________________________________________

If you print some of my models please tag me on social media.

www.Twitter.com/carmelo_nazario
www.instagram.com/thecreatorx3d

If you want to help a brother out please consider signing up to my patreon.

www.patreon.com/thecreatorx3d

Ubiquiti UVC-G3-PRO Lens Wrench

I broke my G3-PRO camera and made this tool up quickly.

It doesn't fit right, but it worked so I have not refined the design.

Enjoy!

Mac Camera Cover_Clip Slider

Mac_Clip_RandomizY.stl

Demolder Tool.stl

This tool was designed out of a need to easy remove stubborn products from a three part mold (two plates with a outside ring) without damaging the product.

To use place tool on table or other sturdy flat surface and then gently put mold on top (remove top plate first is desired). Then gently press down on the outside ring of mold to remove item. 

https://creativecommons.org/licenses/by/4.0/

Nose Clip Anti-Fog

𝘗𝘳𝘪𝘯𝘵 𝘪𝘵 𝘶𝘱𝘴𝘪𝘥𝘦 𝘥𝘰𝘸𝘯 𝘢𝘴 𝘴𝘩𝘰𝘸𝘦𝘥 𝘪𝘯 𝘵𝘩𝘦 𝘱𝘳𝘦𝘷𝘪𝘦𝘸.

𝘕𝘰 𝘴𝘶𝘱𝘱𝘰𝘳𝘵 𝘯𝘦𝘦𝘥𝘦𝘥.
𝘠𝘰𝘶 𝘮𝘪𝘨𝘩𝘵 𝘸𝘢𝘯𝘵 𝘵𝘰 𝘶𝘴𝘦 𝘢 𝘣𝘳𝘪𝘮 𝘵𝘰 𝘩𝘢𝘷𝘦 𝘢 𝘣𝘦𝘵𝘵𝘦𝘳 𝘢𝘥𝘩𝘦𝘴𝘪𝘰𝘯.

TOOL

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Plastic mallet

Ultimate Screwdriver (an overly engineered gag gift)

Flywheel puller for Kuryaka flywheels (Daybreak, Kepler, Pulsar)

Nickel Strip Dispenser

Wire Staple Holder

Die Filer (WIP!!!)

Letterpress Quoin

View 24 new models

Ubiquiti UVC-G3-PRO Lens Wrench

Mac Camera Cover_Clip Slider

Demolder Tool.stl

Nose Clip Anti-Fog

View 165 new models