Phone Galazy A54 Ohsnap Alignment.3mf

Print with 0 top and bottom layers and 15%+ infill.

Designed for use with Crave Samsung Galaxy A54 Case from Amazon

https://www.amazon.com/Crave-Samsung-Galaxy-Shockproof-Protection/dp/B0BRKDTZSM

Design is in no way affiliated with or endorsed by Samsung or Ohsnap.

Weller WLBRK12

Battery powered soldering iron with top-cover.

Socket Bar - 1/4in Drive

SocketBar_1o4.step

GD_Caliper Stand 8in

CaliperStand_8in_ver1.3mf

Potato Masher Concept Kitchen Tool

Masher_1.stl

Garden Dibber - Plant hole maker

FOR_DISPLAY_garden_dibber.stl

Tweezer Tray

I designed this tray to hold my tweezers because I kept on losing them or mixing them up. This allows me to have all my tweezers in one location and separated for different uses.

Any problems or questions feel free to leave a comment and I will try to help.

Subaru ST 498937000

Replacement for Subaru manual transmission special tool number 498937000. Designed to be used as a clamp to lock the main shaft in a vice to torque down the lock nut.

Printed this in ABS on my Ender 3 with no issues. The fit is snug on the gear so you will have to slide it on over the gear with a little bit of force.

Sovol sv06 toolholder

holder.stl

Makerdeck Mesmerizer

Toolholder for ender bracket

tool holder .STL

Angle Ruler

Measure different angles.

Both parts are joined with a M5 bolt and nut or wingnut.

Universal Resin Bottle Safety Handle

Use to avoid putting uncured resin on the outside of your bottles and keep the handle as a "touch point" when your gloves are dirty

Tapered fit so you scale or change to fit any bottle

100% scale is 40mm to 48mm, which will lock onto most bottles, tested on Anycubics, Elegoo and Sunlu

Linearrail Alignment for Aluminium Profiles 20x20 20x40

Presta Valve Tool

presta_valve_tool.step

Wood plate support

You can hold a 18mm wood plate for what you want. I use it to hold the wood plates while I'm gluing the edges and for holding a 1 meter log wood plate in a hailway, to avoid my dog goes to the kitchen.

OnShape Link: https://cad.onshape.com/documents/7252f5aaaa5993ebeee3021b/w/e165c38224b0a5d28fb1f172/e/7d364871311fedd23989d601?renderMode=0&uiState=63b9c3340da83647f5c6290b

Flush Cutter Holder for 20x20 Extrusion, Ender 3

flush cutter holder rounded edges.STL

Self_Defense-Pup.stl

 Clip Chip to hold your chip clips 

The Clip Chip (for your chip clips), is a good tip to keep your clips (and your chips) from giving you the slip. The dips on the chip should ensure a non-slip grip on your chip clips. Don't flip if the dips along your chip don't form an even strip. This should be something you can whip up with a real zip, but I won't nip at any of your tips. The tip of the chip does dip enough to make it stable enough to ship, but don't flip if that goes to slip. Don't take my quips as some sort of superior drip; I will trip as much as I skip. Let me know what issues you have with you clip chip, and how it can better grip your chip clips.

blip, crip, gyp, kip, lip, rip, sip, thrip, yip.

TOOL

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Phone Galazy A54 Ohsnap Alignment.3mf

Weller WLBRK12

Socket Bar - 1/4in Drive

GD_Caliper Stand 8in

Potato Masher Concept Kitchen Tool

Garden Dibber - Plant hole maker

Tweezer Tray

Subaru ST 498937000

Sovol sv06 toolholder

View 19 new models

Toolholder for ender bracket

View 10 new models

Universal Resin Bottle Safety Handle

View 12 new models

Presta Valve Tool

Wood plate support

Flush Cutter Holder for 20x20 Extrusion, Ender 3

View 19 new models

Clip Chip to hold your chip clips

Ankermake PEI Sheet Hanger