I designed this tray to hold my tweezers because I kept on losing them or mixing them up. This allows me to have all my tweezers in one location and separated for different uses.

Any problems or questions feel free to leave a comment and I will try to help.

Tweezer Tray

This is a battery cover for the NB-2L/ NB-2LH, this protects the battery(s) during transportation or just general storage.
I designed this to provide protection to my camera battery's whilst they aren't being used.

If you have any questions feel free to leave a comment or msg me and i will try my best to help, thank you.

Cannon NB-2L/ NB-2LH Battery Cover

I recently got the Thangs Top 30 Creator Award and I am very grateful however, i was surprised that they don't have a award that you can print so I took it upon myself to make one. 

I think this award looks nice and makes a good edition to any shelf. 

I think this also goes without saying, this model if for other creators that have received the Top 30 Creator Award and would also like a physical award. You can still download if you haven't 'no one will judge' but you will know.

Depending on your printer capability's and slicer settings you might need supports.

Hope you enjoy, feel free to post a make or leave a comment, any questions I will try to answer, Thank you.

Top 30 Creator Award 

This is a simple disposable Cookie/ biscuit cutter. I needed a cookie cutter and didn't want to go out and buy one so i designed this simple cookie/ biscuit cutter. 

It can be scaled in the X and Y axis to make it bigger and smaller, it is currently at 50mm inner diameter which, including expansion of cookie/ biscuit, makes a good snack sized biscuit/ cookie.

I know you are not supposed to use 3D printed stuff with food however, this is designed to be printed and use for one session and then thrown away. It uses little material and depending on what material you print it in, it can be recycled.

If you have any questions feel free to ask and i will try to help the best i can. Thank you.


Basic cookie/ biscuit cutter 

**This is a redesign of my first Tool holder**
The biggest flaw with the original was that when you put pliers on it the centre of gravity would cause it to fall over however, with this new design it can hold a lot more weight without falling over.
It doesn’t need supports, all you need to do is print the side file twice (you don’t need to flip it or anything) just print, clean and fit together. 
All of the joints are friction joints and if printed correctly you don’t need glue or screws however, if you want to add glue for extra stability you can.
Any questions feel free to leave a comment or message me and I will try my best to help. Thank you.


Tool holder/ rack V2

Side.stl

I designed and modeled this tray to store bits and bobs that were just laying around, this gives them a home so they are easy to find and wont be damaged.

The inserts slot in and hold securely, if they don't then you could try a bit of glue. I chose to do inserts because the whole thing would have taken too long to print (because I cant do long prints with my current circumstances).

**Please ignore the different colour plastic, I ran out of the matte gray so to finish it I had to use some blue.**

If you have any questions feel free to leave a comment and I will try to respond. Thank you for looking.

Tray For Stuff

Complete stuff tray.stl

**I have a new version of this model on my profile**

Tool Holder For Small Pliers And Cutters


Small Plier - tool rack V1

Holder layer.stl

I made this box to hold a bunch of loose/ small items as well as tools. All the corners are rounded which helps to prevent peeling when printing and makes it look a lot nicer. 

It took me about 14-15 hours to print however I was using new settings as there are some imperfections in the finished print however the model itself is completely fine.

The model itself is 190mm by 190mm so it is a perfect square.

Any questions feel free to ask and I’ll try to respond and help.

Tool junk storage tray

***You will have to buy and attach hinges separately if you want a functioning lid, however they are not too expensive***

A few months ago, I designed a very basic watch box to store some watches, but I never really liked it, so I decided to abandon the project until a few weeks ago I ran out of space to store my collection, so I designed this watch box. It can store up to 4 watches comfortably.

It comes with two types of printable inserts, one slotted and one solid, I prefer the slotted insert because it makes it easier to attach the watches to it whether it is a strap or a metal bracelet.

For this watch box you will need to buy some small hinges, I suggest Amazon for convenience.

And a clasp if you want to. I will be adding a clasp to the front of mine to help hold it shut but you don’t have to.

The lid doesn’t have cutouts or holes for hinges or screws allowing you to decide on which side you want to be the front. It also allows you to thread into the plastic and not need any threaded inserts.

If you have any problems or questions, feel free to ask and I’ll try to respond.

This model is not a remix but allows you to create a remix if you want. 

Watch Box 4 slot

Watch-Box-Body.stl

***This dock does not allow for charging, however *** you can feel free to remix it and allow for a charger to be added.

This is an improved switch dock that I designed to look like the Nintendo Switch OLED dock.

I have previously designed a switch lite dock, but I dint ever like the look of it, so I started from scratch and designed this one with lots of trial and error. The Nintendo Switch logo is cantered on the front like the switch OLED dock. 

For this dock to work without the case you will have to resizes the y axis by only a few mm. This dock is designed to work with the HEYSTOP Case for the Nintendo Switch Lite. The link amazon.co.uk/gp/product/B0948T7NXB/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1 (not an affiliate link)

Does not require any supports.

Any inquires feel free to leave a comment and I will try to help, Happy Printing.

Nintendo Switch lite dock

I’m just a guy with a printer making stuff that my cheap *** won’t buy.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

LTRJ