| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

DECOR DRAWERS
This drawer features a modular face allowing you to install customizable faceplates on the front that you can change at any time. It also lets you print the majority of the drawer with less expensive material and use only your most precious filaments on the faceplate.

__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://www.jerrari3d.com/gen2-modular-system/rails)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://www.jerrari3d.com/gen2-modular-system/table-top-kits)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [185 length](https://www.jerrari3d.com/gen2-modular-system/standard).  

Choose a Faceplate
Download and customize faceplates [HERE](https://www.jerrari3d.com/gen2-modular-system/decor-faceplates)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament
     - [**PLA**](https://amzn.to/3GX8A1c) – Easy to print, works great for most parts
     - [**PETG**](https://amzn.to/45dtxNd) – Stronger and tougher, but can warp more
• Screwdriver
• Magnets (Optional): [10x2mm](https://amzn.to/3TC0v4X) or [6x2mm](https://amzn.to/3ZBheZ4)
• M3 nuts and screws: [Stainless-Steel](https://amzn.to/3Fq45LI) or [Steel](https://amzn.to/4msvHRb)

UNDER TABLE (GEN2 RAILS) HARDWARE
 • Countersunk woodscrews: (https://amzn.to/4l8Zb4o) or (Metric: 3.5x16mm or longer)
• Drill bit that is smaller diameter than the wood screws ([My Recommendation](https://amzn.to/45pC5SQ))
• Pen, Marker, or [Scratch Awl](https://amzn.to/44TbEEZ) (for installing under tables)
 

**INSTRUCTIONS**

🔧[**Visit Jerrari3d.com for Step-By-Step Instructions**](https://www.jerrari3d.com/gen2-modular-system/instructions/creating-labels)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

GEN2 Decor Parts Drawer 240-2W-05H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection  
__________________________________________________
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**CLASSIC DRAWERS**
These drawers are based on the original GEN2 design, featuring a clean, functional layout with an integrated front handle. Designed for easy, one-piece printing without extra parts or assembly.

**GRIDFINITY DRAWERS**
These drawers combine the incredible usefulness of [Zack Freedman's Gridfinity system](https://thangs.com/designer/ZackFreedman) with the modularity of the GEN2 system. This model includes optional slots for [6x2 magnets](https://amzn.to/3ZBheZ4).
*Note that additional standard storage is available alongside the grid

**240 Collection**
The 240 Collection is all about getting more out of your printer without changing a thing. Sized to match the build plates of popular machines like the Bambu X1C and Prusa Core One, these longer drawers give you extra storage in a single print, perfect for tools, parts, cables, or anything else that needs a dedicated space. Find all the 240 models **[HERE](https://www.jerrari3d.com/gen2-modular-system/240)**
__________________________________________________

**STEP 1:** Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at [JERRARI3D.com](https://www.jerrari3d.com/gen2-modular-system)

**[• UNDER TABLE (GEN2 RAILS)](https://youtu.be/2UPSWt1l6U8)**
_Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds._
**[• TABLE TOP KITS](https://youtu.be/1AuZleSjCps)**
_Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere_

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.

These drawers are completely compatible and interchangeable with any GEN2 drawer systems in [240 length](https://www.jerrari3d.com/gen2-modular-system/240).  

Choose a Faceplate
Download and customize faceplates [HERE](https://www.jerrari3d.com/gen2-modular-system/decor-faceplates)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies) but PLA can be used as well
• Screwdriver
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](10x2mm)
• M3 nuts and screws: [Stainless-Steel](https://amzn.to/3Fq45LI) or [Steel](https://amzn.to/4msvHRb)

• (*Optional - Under table) Countersunk woodscrews: (Metric: 4x25mm to 4x16mm) or (SAE: #6 or #8 up to 1" long)
• (*Optional - Under table) Drill bit that is smaller diameter than the wood screws
• (*Optional - Under table) Pen, Marker, or Scratch Awl (for installing under tables)
 

**INSTRUCTIONS**

Detailed visual instructions at [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)

INSTRUCTIONS

See attached videos or visit for basic instructions [JERRARI3D.com](https://www.jerrari3d.com/home)


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍


Gridfinity designed by [Zack Freedman](https://thangs.com/designer/ZackFreedman)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 240-1W-1H Gridfinity Classic Drawer

240-1W-1H Gridfinity Mag Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection  

**2H FEET NOW AVAILABLE**
02/06/2026 - 2H feet added, this increases the storage capacity to GEN2 3W-2H under your Prusa Core One. Optional instruction available **[HERE](https://www.jerrari3d.com/gen2-modular-system/gen2-core-one-kit)**
__________________________________________________
The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, so you can print exactly what you need and customize every piece to fit your space and style.

Unlike store-bought sets, GEN2 lets you print only what you need and expand your setup whenever you want. The drawers snap together seamlessly, giving you endless expansion possibilities. With the unique QuickLock mechanism, rearranging or relocating drawers is quick and effortless, so your storage can grow and adapt with you.

**RECOMMENDATIONS**

**Drawers:**
The GEN2 rail that installs under the printer is 240 length, this fits perfectly on the Core One's build plate and maximizes your your storage space. In the video tutorial I used the following drawers:
• **[240-1W-1H Decor Drawer](https://www.jerrari3d.com/gen2-modular-system/240)**
• **[240-2W-1H Decor Drawer](https://www.jerrari3d.com/gen2-modular-system/240)**

You can also install any shorter length drawer such as the 185 (Standard) length drawers by using a Bi-Directional QuickLock

**Faceplates:**
You can use any GEN2 drawer with this system, some may require you to place your printer near the front edge of a table to access the handle. The faceplate I highly recommend is:
• **[GEN2 Decor EdgeLable Faceplate](https://www.jerrari3d.com/gen2-modular-system/decor-faceplates#h.xbcj4iwc98js)** - The handle is not obstructed by the surface below, you can also create custom labels, and the style compliments the Prusa Core One well, especially if printed in Prusa Orange :)

__________________________________________________

**What You'll Need**

Visit [Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system) for a list of all compatible drawers.

Choose a Faceplate
Download and customize faceplates [HERE](https://www.jerrari3d.com/gen2-modular-system/decor-faceplates)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - **[PETG](https://amzn.to/44jbogE)** or **[PLA](https://amzn.to/4lg8XT6)**
• Screwdriver & Hex Wrenches (provided with Prusa Core One)
• Magnets (Optional): [**10x5x2mm**](https://amzn.to/46odFrD) or [**10x2mm**](10x2mm)
• M3 nuts and screws: [**Stainless-Steel**](https://amzn.to/3Fq45LI) or [**Steel]**(https://amzn.to/4msvHRb)
• (Optional) **[Double Sided Tape](https://amzn.to/4kiOPif)** (better than what I used in the video)


**INSTRUCTIONS**
See video for step by step visual instructions

(Optional) **[GEN2 2H Feet Instructions](https://www.jerrari3d.com/gen2-modular-system/gen2-core-one-kit)**

For more information visit [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system)


**PRINT SETTINGS:**
• 1H Feet - 4 perimeters, 25% infill (Gyroid)
• 2H Feet - 4 perimeters, 20% infill (Adaptive Cubic)
• All other parts - 3 perimeter, 15% infill


**TIPS:**
Printing large models near the edge of a printer's build plate can sometimes lead to edge curling up deforming the rail. Here are some ways you can combat this:

- Clean your entire build sheet using detergent or 99% iso alcohol, additional adhesion can be achieved with glue sticks or adhesion promoters like **[Nano Adhesive](https://amzn.to/44eGszb)**
- Print with an enclosure to prevent drafts and cooler temperatures, preheat the enclosure for a few minutes prior to printing.
- After the print completes wait for the build plate to lower to room temp before removing the model.
- You can always print with materials that print easier and warp less during printing such as PLA

*** Notes:**
The touch screen on the Prusa Core One can sometimes make it difficult to remove 0.5H drawers after installing the drawer case. Luckily the touch screen is only held in place by magnets - opening the door and gently lifting up the touch screen slightly can make inserting the drawer much easier.


Please note: The Non-Commercial license refers specifically to selling prints. You're absolutely welcome to use my designs in commercial environments—I actually encourage you to use them anywhere you see fit! 👍

GEN2 Prusa Core One Kit (Modular Storage)

Core One - GEN2 Rear Bracket.3mf

Core One - 240-2W - Rail.3mf

GEN2-2H Feet - FL Foot.stl

GEN2-2H Feet - FR Foot.stl

GEN2-2H Feet - REAR Foot.stl

GEN2-2H Feet Brackets.stl

GEN2-2H Feet Kit - All.3mf

185-2W-1H Decor Parts Drawer

185-2W-1H Decor Parts Drawer.stl

185-2W-1H Case.stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
_______________________

The EdgeMetal Series is a collection of drawer faceplates for the **GEN2 Decor Series**. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.

The EdgeMetal series has a strong sharp look unlike anything else. Printed in a highly reflective filament, the angled corners generate an striking appearance. Print as one solid color or experiment with multicolor printing for some really fascinating results.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)
 
**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4g88Hn8) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)

**INSTRUCTIONS**
• Print the model laying face up, no supports needed
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Faceplate - EdgeMetal

EdgeMetal - Single - 44mm Handle.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in **LARGE** length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/large)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

_____________________

**270 Collection**
The 270 Collection takes drawer length a step further, built to take advantage of extended build plates like those on the Prusa XL and Bambu H2D. These oversized drawers offer generous storage in a single print, making them perfect for tools, cables, or larger parts that don’t fit in shorter units. If you’ve got the printer space, the 270 Collection makes sure you put it to good use. Find all the 270 models **[HERE](https://www.jerrari3d.com/gen2-modular-system/large)**

__________________

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit




GEN2 Table Top Kit V2 - 270

Cover - Lower - Single - LARGE.stl

270-1W-1H Case.stl

270-1W-1H Classic Drawer.stl

270-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface.

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

**115 Collection**
The 115 Collection is built around compact, fast-printing drawers that fit comfortably on smaller printer beds while still offering practical day-to-day storage. They’re well balanced for under-table setups, Table Top Kits, and even wall mounting, making them a versatile choice for almost any GEN2 layout. Find all compatible 115 Collection models **[HERE](https://www.jerrari3d.com/gen2-modular-system/medium)**.

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit








GEN2 Table Top Kit V2 - 115

Cover - Upper - Single -  MEDIUM.stl

Drawer Stoppers.stl

115-1W-1H Case.stl

115-1W-1H Classic Drawer.stl

115-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in **MINI** length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/mini)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

**165 Collection**

The 165 Collection offers efficient storage in a compact footprint, optimized for smaller printers like the Prusa Mini and Bambu Lab A1 Mini. It provides more room than the 115 mm drawers while maintaining fast print times and broad compatibility. Find all compatible 165 Collection models **[HERE](165 Collection

The 165 Collection offers efficient storage in a compact footprint, optimized for smaller printers like the Prusa Mini and Bambu Lab A1 Mini. It provides more room than the 115 mm drawers while maintaining fast print times and broad compatibility. Find all compatible 165 Collection models HERE)**

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit
 


GEN2 Table Top Kit V2 - 165

Cover - Lower - Double - MINI.stl

GEN2 QuickLocks V1.stl

165-1W-1H Case.stl

165-1W-1H Classic Drawer.stl

165-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection
__________________________________________________

The GEN2 Modular Storage system is a fully functional 3D printable organization ecosystem that was originally designed to be used under any table or desk. The GEN2 Table Top Kit V2 allows you to place these units elegantly on any surface. This version support GEN2 drawers in STANDARD length, you can find all the supported drawers here: [Jerrari3d.com](https://www.jerrari3d.com/gen2-modular-system/standard)

This refined version creates outstanding structure for connect neighboring storage units allowing drawers to be installed horizontally without limits. Thanks to the use of compliant mechanism and dovetail rails very few screws are even required to assemble the unit.

Quickly disassemble and reassemble the kit at any time to fit perfectly in any location.

___________________________

**185 Collection**

The 185 Collection offers decent storage volume while also maintaining compatibility with the widest range of 3D printers. Find all compatible 185 collection models here [HERE](https://www.jerrari3d.com/gen2-modular-system/standard)

__________________________________

**HARDWARE**

🔧[**Listed in instruction manuals**](https://www.jerrari3d.com/gen2-modular-system/instructions)

**INSTRUCTIONS**

🔧https://www.jerrari3d.com/gen2-modular-system/instructions/table-top-kit




GEN2 Table Top Kit V2 - 185

Cover - Upper - Double - STANDARD.stl

TPU Feet X4.stl

Magnet Insert - 6x2mm.stl

Magnet Insert - 10x2mm.stl

185-1W-1H Case.stl

185-1W-1H Classic Drawer.stl

185-1W-1H Decor Drawer.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
_________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

The GEN2 Decor Gridfinity Drawers - Standard are a collection of the standard length drawer bodies, they combine the best of both the GEN2 Storage System and the Gridfinity system by [Zack Freedman](https://thangs.com/designer/ZackFreedman). The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room. 

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:

• [GEN2 Modular Drawers - STANDARD](https://than.gs/m/1042322) - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!

• [GEN2 Table Top Kit - STANDARD](https://than.gs/m/1042322) - This kit contains covers and feet to place the drawers on any surface.
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

**DECOR DRAWERS (OPTIONAL)**
• GEN2 Decor Drawers - STANDARD - [DOWNLOAD](https://than.gs/m/1116945)


**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time. You'll at least need the drawer case from this model kit to get started - GEN2 Modular Drawers - Standard. 

GEN2 Decor Gridfinity Drawers - Standard

GEN2 Decor Gridfinity Drawer Double - Standard.stl

**For Instructions Download the:**
>[GEN2 Interactive Catalog Download](https://tinyurl.com/GEN2system)

The Crystal Series is part of the GEN2 Decor series. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - https://than.gs/m/1116945

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - Crystal

Crystal B Wide - Handle 44mm .stl

| **Visit** [JERRARI.com](https://www.jerrari3d.com/) for **Instructions** and a complete look at the GEN2 collection 
__________________________________________________

The BlockBar Series is part of the **GEN2 Decor series**. The handles and knobs can mixed and matched with different faceplates to create a unique personalized storage solution that is completely 3D printable.

**What You'll Need**
 
**BASE DRAWER MODELS**
• GEN2 Decor Drawers - Standard - [DOWNLOAD](https://than.gs/m/1116945)

**FACEPLATES**
• Essential Series- [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Silk Silver PLA](https://amzn.to/4dEgnLM) (this is what I used in many of my photos)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
 

**UPDATE: V1.1** (1-21-2024)
• This update omitted the M3 nut slot and instead uses a new self-tapping hole for M3 screws.
• I've also added a few of my original BlockBar handle designs that didn't make the initial cut

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.



GEN2 Decor - Handles - BlockBar

V1.1 BlockBar A - Handle 44mm.stl

V1.1 BlockBar B - Handle 44mm.stl

V1.1 BlockBar C - Handle 44mm.stl

V1.1 BlockBar D - Handle 44mm.stl

V1.1 BlockBar E - Handle 44mm.stl

V1.1 BlockBar F - Handle 44mm.stl

V1.1 BlockBar Knob.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
__________________________________________________

A **large** and fully adjustable tray holder that fits under any table, enclosure, or workbench. fits Vorons, XL, etc.

GEN2 Adjustable Steel Sheet Holder - Large

gen2-steel-sheet-holder-sides.3mf

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 
_______________________
**THIS IS A SAMPLE FACEPLATE FROM THE [GEN2 Decor - Faceplates - EdgeLabel Series](https://than.gs/m/1215609)**
Feel free to use the faceplate as usual, if you enjoy the EdgeLabel faceplate please consider supporting the project by joining the [Jerrari Club ](https://thangs.com/designer/Jerrari)or by purchasing the full faceplate collection here: https://than.gs/m/1215609

The EdgeLabel Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies and slide your personalized faceplate in place. Lock in place with an optional M3 screw and nut.

The EdgeLabel series is focused on functioning as a modular method to label drawers easily. The faceplates feature a built in handle than looks modern and pairs nicely alongside the original GEN2 drawers. They are designed to be easy to print using multiple colors not only on multicolor 3D printers, but single color printers as well.

**What You'll Need**
 
Visit **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)** for a list of all compatible drawers.

This faceplate will fit any drawer that is 1W-1H in any of the lengths shown on jerrari3d.com, such as ones labeled 185-1W-1H.

**HARDWARE**
_Includes affiliated links to help support my projects_
• Filament - PLA (I used Prusa Orange PLA)
• M3 screws: M3x6 [(I prefer this kit)](https://amzn.to/3LSaQFv)
 
Find more GEN2 Decor Drawer options and sizes at **[Jerrari3D.com](https://www.jerrari3d.com/gen2-modular-system)**


**UPDATE** V1.2 (3-15-2025)
• This update introduces even more customization by splitting the faceplates into multiple parts that snap together with compliant mechanisms. Create beautiful faceplates even without a multicolor 3D printer.
• Print Accent pieces facedown on textured plates for outstanding results

**INSTRUCTIONS**
See attached instructions



GEN2 Decor - Faceplate - EdgeLabel Intro Edition

EdgeLabel 1W-1H.3mf

1W-1H Accent.stl

1W-1H Back Cover.stl

EdgeLabel 1W-1H.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Series is the next evolution in the most versatile 3D printed drawer system, the GEN2 Modular Storage System. You can now easily swap drawers around thangs to the fully 3d printable QuickLock mechanism design
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length. Here are my recommended links to get started:

• [GEN2 Modular Drawers - STANDARD](https://than.gs/m/1042322) - Here you will find everything you need for installing the drawers under tables, such as the rails, drawers cases, and my favorite… QuickLocks!

• [GEN2 Table Top Kit V2 - STANDARD](https://than.gs/m/1231757) - Alternatively this kit will allow you to place your drawers on top of any table surface.

For a complete overview of the GEN2 Drawers in STANDARD Length visit [**https://www.jerrari3d.com/gen2-modular-system/standard**](https://www.jerrari3d.com/gen2-modular-system/standard)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Magnets for Gridfinity (6x2mm) - [I prefer these in 300 count](https://amzn.to/3B3JIlr)
• [Magnetic Insertion Tool V2](https://www.printables.com/model/1008467-magnet-insertion-tool-v2) (Optional)


**INSTRUCTIONS**
_For basic instruction on assembly please check out the above video_

[Detailed visual instructions at Jerrari3d.com](https://www.jerrari3d.com/instructions-hanging)
_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Gridfinity Magnet Drawers - STANDARD

GEN2 2x1 Gridfinity Magnet Double Drawer - STANDARD.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in MINI length. 

To customize these drawer here are my recommended links to get started, you can also fin more at [jerrari3d.com](https://www.jerrari3d.com/)
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Magnets for Gridfinity (6x2mm) - [I prefer these in 300 count](https://amzn.to/3B3JIlr)
• [Magnetic Insertion Tool V2](https://www.printables.com/model/1008467-magnet-insertion-tool-v2) (Optional)

For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - MINI

GEN2 2x1 Decor Gridfinity Magnet Double Drawer - MINI.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in LARGE length. 

To customize these drawer here are my recommended links to get started, you can also fin more at [jerrari3d.com](https://www.jerrari3d.com/)
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
• Magnets for Gridfinity (6x2mm) - [I prefer these in 300 count](https://amzn.to/3B3JIlr)
• [Magnetic Insertion Tool V2](https://www.printables.com/model/1008467-magnet-insertion-tool-v2) (Optional)

For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - LARGE

GEN2 2x1 Decor Gridfinity Magnet Double Drawer - LARGE.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This GEN2 Decor Drawers - STANDARD is a collection of the standard length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in STANDARD length.

To customize these drawer here are my recommended links to get started, you can also fin more at jerrari3d.com
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

_______________________
Gridfinity designed by [Zack Freedman](https://than.gs/u/76763)
Magnetic Gridfinity developed using [Actually Parametric Gridfinity – Base Grid + Bins](https://www.printables.com/model/399759-actually-parametric-gridfinity-base-grid-bins/files) by [pcnc](https://www.printables.com/@pcnc)

GEN2 Decor Gridfinity Magnet Drawers - STANDARD

gen2-2x1-decor-gridfinity-magnet-double-drawer-standard.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 Decor Series is the next evolution in the most versatile 3D printed drawer system, The GEN2 Modular Storage System. You can now easily swap faceplate and handles to fit the mood of the room you want. Being able to easily customize colors, patterns, or adding custom text.

This is a collection of the SMALL length drawer bodies. The bodies can be printed in any material, slap any sleek GEN2 Decor faceplate and handle/knob to the front, and BAM! You got yourself something that will look at home in any room.
__________________________________

**What you need?**
These drawers are completely compatible and interchangeable with any GEN2 drawer systems in SMALL length. Here are my recommended links to get started:
 
**FACEPLATES**
• Essential Series - [DOWNLOAD](https://than.gs/m/1116946)
• Chevron Series - [DOWNLOAD](https://than.gs/m/1116950)
• EdgeMetal Series - [DOWNLOAD](https://than.gs/m/1134534)

**HANDLE/KNOBS**
• BlockBar Series - [DOWNLOAD](https://than.gs/m/1116949)
• Crystal Series - [DOWNLOAD](https://than.gs/m/1134382)

_______________________

**HARDWARE**
Includes affiliated links to help support my projects
• Filament - [Black PETG](https://amzn.to/46wset1) (My go to for the drawer bodies)
• Screwdriver
• Countersunk woodscrews: (Metric: [4x25mm to 4x16mm](https://www.ikea.com/us/en/p/fixa-200-piece-wood-screw-set-70224228/)) or (SAE: #6 or #8 up to 1" long)
• Drill bit that is smaller diameter than the wood screws
• Pen, Marker, or [Scratch Awl](https://amzn.to/3YmjhAF) (for installing under tables)
• Magnets (Optional): [10x5x2mm](https://amzn.to/46odFrD) or [10x2mm](https://amzn.to/3WuMkzp)
• M3 nuts and screws: M3x6 - M3x10- [I prefer this kit](https://amzn.to/3LSaQFv)
For basic instruction on assembly please check out the above video

**INSTRUCTIONS**
• Push M3 nuts into slots on handles/knobs

• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.

• As noted above you'll also need a GEN2 system of your choice, don't worry, they are fully modular and can be changed around at any time.

GEN2 Decor Drawers - SMALL

GEN2 1x0.5 Slim Single Case - SMALL.stl

GEN2 1x0.5 Slim Single Drawer - SMALL.stl

| Visit [JERRARI3D.com](https://www.jerrari3d.com/) for Instructions and a complete look at the GEN2 collection 

__________________________________________________

The GEN2 115 Decor Drawers are part of the GEN2 QuickLock Modular System, a 3D printable storage system designed to be expanded, rearranged, and customized over time.

This listing includes all **18 size variations** of the 115 Decor Drawer collection. The 115 is a compact GEN2 size, great for desk storage, small workstations, and tight spaces where a deeper drawer would be overkill. Fast to print and easy to expand as your needs grow.

The **v2602 update** is a major redesign of the Decor drawer system. These drawers now print faster, use less material, and no longer require purchased hardware for the front faceplate assembly. The new open-front design works with updated GEN2 Decor Faceplates and printed attachment features, making the system easier to print, assemble, and customize.

Decor Drawers use swappable faceplates and handles, so you can change the look of your storage setup without replacing the entire drawer. Mix colors, materials, handle styles, and faceplate designs to make the system fit your space.

For a complete Decor Drawer setup, you will also need compatible GEN2 Cases, Decor Faceplates, and handles or knobs.

See the **Instructions** tab for setup details, compatibility notes, related parts, and assembly guidance.


Swap

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

GEN2 Decor Parts Drawer 240-2W-05H.stl

GEN2 Prusa Core One Kit (Modular Storage)

185-2W-1H Decor Parts Drawer