Google Pixel 6A LEANBEEF Hard Case // Blank

6A_LEAN_blank.stl

Figure 8 Compliant Clips

figure8-long.stl

Faceted Antique Style Bowl (Easy Print Vase Mode)

An old fashioned style bowl designed to be printed quickly and easily in vase/spiralise mode. 

When printed in a transparent filament in vase mode it comes out very clear, almost like glass!

Prints pictured were printed at 150% scale in Filoalfa glitter PLA using a .4 nozzle however this would come out great scaled up further, especially using a larger nozzle.

Halfling Haven Page Holder

Halfling Haven Page Holder.stl

SIMPLE FLEXI LION

Lion_Mane.stl

Auxetic Cubes // 30mm 6x6 Stacked

Auxetic Cubes 30mm 6x6 stack.stl

EZPZ Pegboard Hook // 10mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 10mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Stupidity Gauge — Fully Printable Desk Toy (No AMS, No Supports)

Stupidity Gauge Pre Painted.3mf

Gymnastic Rings (Exercise, Gym, Climbing, Crossfit, etc.)

32mmRing.stl

Floating Eye Tealight Stand or Wall Mount

FloatingEyeballStand.stl

Coathanger S-Hook

S_Hook_35mm.stl

EZPZ Pegboard Hook // 15mm Reinforced Hook

An excellent hook for all your pegboarding needs! This EZPZ pegboard hook prints quickly without supports, and features a unique clipping system that snaps onto your pegboard so it won't accidentally fall out, but it can also be removed in a non-destructive manner!

This particular hook has a 15mm depth and a reinforcing strut along the bottom, which takes up a bit more space in exchange for greater strength. You can check out my other hooks for different sizes, or leave a comment to request something specific!

---

**_Printing Guidelines_**

Print solid. That's it!

The footprint is quite small, so make sure you have a well leveled build plate and good adhesion. You may need to slow down your first layer speed or even add a brim if you're having trouble getting the prints to stay down.

---

**_Operating Instructions_**

These are designed for standard pegboards with 0.25" holes spaced 1" apart, and roughly 0.25" thick.

To install, first insert the top peg, then pop in the bottom clip. You can press the clip from below while inserting if you have a fragile pegboard.

To remove, just to the reverse, pressing from below so the clip can be removed. You can use a flathead screwdriver to press the clip up further, especially if you have a fragile pegboard.

Pickle Tickle

Pickle TickleR1.stl

Springo Gift Box (Single Color Version)

One cool thing about Springos is that you can hide little trinkets inside of them. That is especially appropriate with this gift box springo!

Print at .15mm layer height and make sure the coil part is printed solid. 3 shells/outlines have given me good results. No supports required!

This is the single color version of this model. You can find the split model for dual color/material printing in my Holiday Springo set [here](https://www.myminifactory.com/object/3d-print-80142).



Support free

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Google Pixel 6A LEANBEEF Hard Case // Blank

Figure 8 Compliant Clips

Faceted Antique Style Bowl (Easy Print Vase Mode)

Halfling Haven Page Holder

SIMPLE FLEXI LION

Auxetic Cubes // 30mm 6x6 Stacked

EZPZ Pegboard Hook // 10mm Reinforced Hook

Stupidity Gauge — Fully Printable Desk Toy (No AMS, No Supports)

Gymnastic Rings (Exercise, Gym, Climbing, Crossfit, etc.)

Floating Eye Tealight Stand or Wall Mount

Coathanger S-Hook

EZPZ Pegboard Hook // 15mm Reinforced Hook

Pickle Tickle

Springo Gift Box (Single Color Version)

SKEWBITS v2.0 Puzzle Game // Premium Set + Problems 001-010

Santa's Sleigh Flatpack

Auxetic Cubes // 18mm 10x10 Stacked

Tetrahedrons // Folding Polyhedra

See No Evil Frog

PLEIADES Soap Cover // 57x83x103