Steampunk Lightsaber Bracket

LIGHTSABER BRACKET-LARGE.stl

Maul's Collapsing Lightsaber 

**Maul’s Print-in-place Collapsing Lightsaber**
_Print-in-Place Version_

Each half of this double lightsaber is designed to be printed all as one part as a single print-in-place assembly containing both the hilt and the blade. There is a connector for attaching both saber together. 

The [Removable Blade Version]( https://www.patreon.com/3dprintingworld) is available to my Patrons.

**Printing**
Supports are not required, there is a built in support for the switchs. I have detailed instructions on [how to print collapsing swords](https://www.dddprintingworld.com/pages/printing-collapsible-lightsabers-and-swords) on my website. If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer with [Polymaker Silk Silver PLA](https://amzn.to/3zMj2Ca)(aff.)
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)


Animatronic baby Yoda

BodyBack.STL

Rey's Collapsing Lightsaber

**Ray’s Print-in-place Collapsing Lightsaber**
_Print-in-Place Version_

This Lightsaber is designed to be printed all as one part as a single print-in-place assembly containing both the saber and the blade. It prints 231mm tall but extends to over 1000mm long. 

The [Removable Blade Version]( https://www.patreon.com/3dprintingworld) is available to my Patrons.

**Printing**
Supports are not required, there is a built in support for the on/off switch. When printing use a .4mm nozzle and set the line width to .43 so the blades are two shell thick. This print is sensitive to first layer height, the  layer seam and extruder calibration.  If this is your first time printing, I would suggest you try the [test print]( https://social.thangs.com/m/23601) first. Make sure the segments are totally free before continuing.  it’s a good idea to make sure your setting are tuned so the blades don’t fuse. The test print is a total of 24mm high so I change; retraction, cost, wipe, extra restart, z-hop, ext.. settings every 8mm.  Then I compare the changes until I achieve the best result.  The removable blade version is a much easier print because you can print the blades separately in vase mode. 

Printed on the [Muldex]( https://github.com/3dprintingworld/MULDEX) rep-rap IDEX printer with [Polymaker Silk Silver PLA](https://amzn.to/3zMj2Ca)(aff.)

**Other Collapsing Lightsabers**
[ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803)
[Vader’s Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-23598)
[Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319)
[Leia’s Dual and Single](https://thangs.com/3dprintingworld/Leias-Dual-Extrusion-Collapsing-Lightsaber--25509)


Mandalorian Bust - Starwars - Fan Art

R2D2 Printer Bobblehead

R2D2 Assembled.3mf

R2D2 container

bottom.stl

STORMTROOPER DOOR HANGER

a fun door hanger for star wars fans.


**printing settings**
scaling: 100% or higher
nozzle: 0,4
layer height: 0.2 
wall line count: 2
infill: 10%
support: No



this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_

happy printing

Beary Nice Koozie

I couldn't bear not making a can holder to hold a bigger can (160z), but I was stumped on which direction to go....

So I just ran with the idea, quite literally!

- Support recommended under the figure's head.

Original file: by [MandicReally](https://thangs.com/designer/MandicReally)

[Blank Can Cup - Workspace Challenge Base!!](https://thangs.com/designer/MandicReally/3d-model/Blank%2520Can%2520Cup%2520-%2520Workspace%2520Challenge%2520Base%21%21-67884)

Blank_16oz_Can_Cup_Rly_v1.stl

Pikachu x Darth Vader

Boba Fett - Star Wars Fan Art - Bust

May the force be with you 3

May the force be with you 3.STEP

R2D2 and C3PO best friends necklace 

R2D2.stl

MAY THE 4TH BE WITH YOU

Obi-Wan’s Print-in-Place Collapsible Lightsaber

**Obi-Wan’s Print-N-Place Collapsible Lightsaber**

This Lightsaber is designed to be printed all as one part as a single Print-in-Place assembly containing both the saber and the blade. It only prints 217mm tall but extends to over 950mm long after printing. 

Other Versions
[Removeable Blade]( https://social.thangs.com/m/64993)
[Dual Extrusion]( https://social.thangs.com/m/64993)

**Printing**
Supports are not required but there is a built in support for two of the buttons. When printing use a .4mm nozzle and set the line width to .43 so the blades are two shell thick. Before printing the blade assembly make sure perform the test print found [here]( https://thangs.com/3dprintingworld/Sword-Saber%20Test%20Print-23601)  This print is sensitive to the layer seam and extruder calibration, it’s a good idea to make sure your setting are tuned so the blades don’t fuse. The test print is a total of 24mm high so I change; retraction, cost, wipe, extra restart, z-hop, ext.. settings every 8mm.  Then I compare the changes until I achieve the best result. 

**Other Collapsing Lightsabers**
[ROTJ Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Lightsaber-Dual-Extrusion--34803)
[Vader’s Single Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-23598)
[Vader’s Dual Extrusion]( https://thangs.com/3dprintingworld/Collapsing-Sith-Lightsaber-dual-extrusion-28319)
[Leia’s Dual and Single](https://thangs.com/3dprintingworld/Leias-Dual-Extrusion-Collapsing-Lightsaber--25509)

_Note: Assembly model for reference only._
___
**Support and Licensing**
If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)



Starwars

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Steampunk Lightsaber Bracket

Maul's Collapsing Lightsaber

Animatronic baby Yoda

Rey's Collapsing Lightsaber

Mandalorian Bust - Starwars - Fan Art

R2D2 Printer Bobblehead

R2D2 container

STORMTROOPER DOOR HANGER

Beary Nice Koozie

Pikachu x Darth Vader

Boba Fett - Star Wars Fan Art - Bust

View 14 new models

R2D2 and C3PO best friends necklace

MAY THE 4TH BE WITH YOU

Obi-Wan’s Print-in-Place Collapsible Lightsaber

MSE-6 aka Mouse Droid Desk Organizer

Obi-Wan's Dual Extrusion Lightsaber

GNK Droid Pencil Cup

Obi-Wan's Replaceable Blade Lightsaber

Samurai Stormtrooper helmet - Star wars - Fan Art