The sale, sharing, and modification of data is prohibited.
**If you wish to sell prints, please obtain a commercial license from here:**
https://www.patreon.com/Manabun_lab

**Create a Multicolor Puzzle with a Single-Color Printer!**
By using 5x2mm magnets, adhesive, and this puzzle data, you can create a colorful puzzle without the need for supports (we recommend adding a brim). By printing the color-coded parts with different filament colors, you can achieve a stunning multicolor effect.

**There is an explanation on how to glue magnets. https://youtu.be/DR4dDgUL4IQ**

The puzzle fun begins with attaching neodymium magnets to each piece. Once completed, challenge your family and friends to solve it! After the fun, it makes a perfect decorative piece for your room.
If you prefer, you can also glue the pieces together directly without magnets to enjoy it as a figurine.

As a bonus, we have also included a model with the puzzle pieces fused together.

**Excited! Enjoy a larger puzzle by enlarging it!**
By enlarging the print to 155%, you can create a big puzzle using 8x3mm magnets! The larger size makes it easier for small children to play with and provides great satisfaction.
For more details, please watch this video: https://youtu.be/y-1LrwWMlUI

**Things to prepare**
**(1)** super glue.

**(2)** 24 pieces of 5x2mm magnets.
Magnets can be purchased on Amazon or AliExpress. I bought mine from here: https://s.click.aliexpress.com/e/_ooTqNVy
Alternatively, you can also purchase them from Bambu Lab with the model number CA-003: https://store.bambulab.com/products/round-magnet
When printing at 155%, please prepare 8x3mm magnets.

How to make
**(1)** Please print the following files: "Snowman_1st_color.STL", "Snowman_2nd_color.STL", "Snowman_3rd_color.STL","Snowman_4th_color.STL"
I recommend adding a brim. No support is needed.
**

You can enjoy the combination of colors by printing in multiple colors. The print data is set to the optimal orientation, so please print as is. Individual piece data is also included, and you can print only your favorite parts by comparing it with the file name in the image.

**(2)** Glue the magnets into the hexagonal holes. (The hole is made hexagonal to prevent the glue from overflowing.) Be careful with the orientation of the magnets, the holes are designed to be loose, so be sure to glue them firmly.

**(3)** Have fun!

Low Poly Snowman Magnet Puzzle (No supports, no AMS)

Snowman_1st_color.STL

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:
Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out.

**Christmas Castle Model Overview**
Introducing the Christmas Castle!

This enchanting model, complete with a winter pack, is my most ambitious creation yet, designed to capture the magic of the holiday season.

**Key Features:**
- Versatile Seasonal Design: Easily remove snow details for a seasonal transformation. Packs for spring, summer, and winter available.
- Easy Printing: No support material needed! Compatible with standard and multicolor printers.
- Modular Structure: Print in stages (Levels 1 & 2, towers, walls) for flexibility in assembly.
- Illumination Ready: Designed to accommodate various light types (LED strips, wire lights, etc.), allowing you to create a magical glow.
- User-Friendly Instructions: Includes animated online instructions and printable PDFs for step-by-step assembly.

**Specifications:**
- Full Assembly Size: 462mm (18.2in) x 586mm (23in) x 412mm (16.2in)
- Print Requirements: Minimum build plate size: 224mm x 221mm x 180mm. For smaller printers, scale down to 10%, but check layer heights for color changes.

**Additional Packs:**
- Summer Pack: Available for a festive summer look here.

**Notes:**
- Interactive Instructions: Created using CADASIO Software for an engaging assembly experience.
- Customizable: Use glue and your creativity to personalize the colors and decorations.

Unleash your holiday spirit with this magical Christmas Castle and make it a cherished centerpiece for years to come!

Video on my YouTube channel:
[https://youtu.be/HMyhUldm_9s?si=q7CXB8HJjg-320tQ](https://youtu.be/HMyhUldm_9s?si=q7CXB8HJjg-320tQ)

**3D printing settings**
Link to buy Polymaker filaments in the USA:
[https://us.polymaker.com?aff=824](https://us.polymaker.com?aff=824)

**Additional Printing Details for the Christmas Castle**
**Print Specifications:**
- Layer Height: All parts are printed at 0.2mm for a detailed finish.
- Filament: Polymaker PLA is recommended for optimal results.
- Slicer: Prusa Slicer is used for preparation.

**Included Resources:**
- Instruction PDF: A detailed document with step-by-step assembly instructions and printing suggestions is provided.
- Color Guide: A PDF with the specific colors used in the model is included to help you achieve the desired look.

**Support:**

If you have any questions about printing or assembly, feel free to reach out—I’m here to help! Enjoy bringing this magical castle to life!

Christmas Castle

STL Demo Placeholder (Use Master File Instead).STL

Snowmen are loved not only at Christmas, but throughout the entire winter. That’s why, while completely redesigning my winter items this season, I knew this snowman had to be included. A few years ago, the Foldable Snowman gained tremendous popularity thanks to its folding structure, and this time I’ve reimagined it from the ground up.

I designed this snowman with an innocent, childlike smile—an expression inspired by the moment of seeing snow for the very first time. It’s a face filled with brightness and curiosity, free from worries, full of wonder at the world.

I hope that when you look at this snowman, you can leave behind all the concerns of the past year and welcome the coming year with the same bright, curious expression.

The assembly process is very simple, so please refer to the video.
https://youtu.be/BgvJCamGdzc

Merry Christmas! 🎄⛄

Largest part in printing, size = X 191mm, Y 156mm, Z 60mm, After full assembly size= X 135mm, Y 80mm, Z 132mm

Total Build Time : 24h / Plastic Weight : 105g

First Snow Baby (Foldable Snowman V2)

GOODesign_Body.stl

This is the coolest way to ROCK out the Christmas season! Printed in multiple pieces and assembled separately, this can be a simple seasonal decoration OR it is designed to be a Holiday Radio! All 3mf files included as well as STL files.

Links to assembly videos and Amazon products are included below. Search for the Amazon ASIN to find specific products used. 

Directions:
Printing, you will need - 
1 House 
1 House Back
1 Roof
1 Chimney Snow
1 Door
2 Window Pains
2 Trees (1L, 1R)
8 Gumdrops
33 Lights
2 Candy Twists
1 Candy Twist Knob

Radio:
5W+5W Mini Amplifier Board - Amazon ASIN: B0CQJPPS27 https://www.amazon.com/dp/B0CQJPPS27?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

2" 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker - Amazon ASIN: B01CHYIU26
https://www.amazon.com/dp/B01CHYIU26?ref=ppx_yo2ov_dt_b_fed_asin_title

Mp3 Player Audio Module - Amazon ASIN: B086YLK2XP
https://www.amazon.com/dp/B086YLK2XP?ref=ppx_yo2ov_dt_b_fed_asin_title

Solder
Soldering Iron
Wire
(8) 6x2mm magnets

Watch my video here to guidance on assembly: https://youtu.be/s5stnroZ6jE

- All the small pieces, including magnets attach to house and house back in pre-printed holes/slots. Use a little of your fabvorite glue to hold them together. 
- The trees can be attached in either direction (you will see there is a long side and short side). They were designed that the long side attaches to the front of the house, but either way works.
- I originally attached small pieces of speaker fabric to the window pains, but realized it is much easier to glue the window pains and front door to the house, THEN add a piece of speaker fabric (or any colored fabric) behind the openings to the inside of the house.  there is less trimming required doing it this way. Just lay the fabric on the inside of the house and drop a small dab of CA glue to the 4 corners. 
- Watch A video by Perry Daniels here: https://youtu.be/xFWc0rc6z2A?si=k8WPE99ABQhDyO57 to assemble the MP3 player for the internals of the radio. It is the video that inspired me to build this. Give him a like and subscribe while you're there! 
- The Amplifier board is designed to sit on the shelf and use a glue gun to hold it in place. Speaker fits snuggly in behind the left window and held in with glue gun. The mp3 board can be glued to the base of the house. Remember to place the mp3 board towards the front of the house to ensure you have enough flexibility in the power cord to run through the hole in the House Back. 

If you have ANY questions drop into the Discord listed below! 

Printed in Panchroma Matte PLA
https://us.polymaker.com/products/panchroma-matte

Private Use Only.

Discord for Questions: https://discord.gg/7Fxpk3fkak 

Become a Thangs.com Maker Member for unlimited downloads or become a MERCHANT MEMBER for commercial use. 

Members get priority recommendations and customization. We would love for you to join!
Make sure to like and follow. Post your make so we can see!





Gingerbread House Radio / Decor

Gingerbread Radio - House.stl

Get commercial license and download newest models by GOODesign cheaply- https://www.patreon.com/goodesign

This design is not for commercial use and should not be printed for sale.

The Star Wars AT-AT I previously designed gained great popularity. Since then, while working on various other designs, I started to think about how I could improve the AT-AT I had created.
So this time, I made several enhancements and designed the AT-AT Version 2.0.
In particular, I made significant improvements to the head section, allowing the lower part with the laser to move back and forth, just like in the movies.
Enjoy this newly improved, high-quality Star Wars AT-AT, featuring print-in-place technology!

Check out the video below for a step-by-step guide on how to put it together!

https://youtu.be/GytCs7XrmQQ
https://youtu.be/GrJVu2Va14s
https://youtu.be/hv90qwgkzS8

1 : 144 scale

Size, X 70mm, Y 191mm, Z 157mm

Print-in-place Articulated STARWARS AT-AT Ver2.0

GOODesign_Print-in-place_Articulated_STARWARS_AT-AT_Body.stl

**Support My Work**
If you appreciate my designs and would like to support my work, or if you're interested in purchasing individual models instead of a subscription, here are some options available:
Cults3D: [Purchase individual models here](https://cults3d.com/en/users/fulv/3d-models)
Thank you for your support! If you have any questions, feel free to reach out.

**MINI Christmas Castle Overview**
**Introducing the MINI Christmas Castle!**

This delightful model includes a winter pack and is designed for small printers like the PRUSA MINI and Bambu Lab A1 Mini.

**Key Features:**
- Compact Size: Full assembly dimensions of 250mm x 260mm x 350mm (9.8 x 10.2 x 13.8 in), making it 40% smaller than the standard castle.
- Seasonal Adaptability: Easily remove snow details to switch between seasons. More seasonal packs (like spring and summer) will be available soon.
- Easy Printing: No support material needed! Compatible with standard and multicolor printers.
- Modular Design: Print in stages (Levels 1 & 2, towers) and later add castle walls and a snow base for the full effect.
- Illumination Ready: Accommodates various light types (LED strips, wire lights, etc.) for a magical display.

**Specifications:**
- Build Plate Requirements: Minimum size of 170mm x 170mm x 180mm. Larger parts can be split for easier printing.

**Included Resources:**
- Interactive Instructions: Easy-to-follow animated online instructions and printable PDFs guide you step by step through assembly.
- Color Guide: Suggestions for filament colors included to help you customize your castle.

**Support:**
If you have any questions about printing or assembly, feel free to contact me at fulv@me.com. I’m here to help!

Bring home the magic of Christmas with this charming MINI Castle and let your creativity shine!

Video on my YouTube channel:
[https://youtu.be/HMyhUldm_9s?si=q7CXB8HJjg-320tQ](https://youtu.be/HMyhUldm_9s?si=q7CXB8HJjg-320tQ)

**3D printing settings**
Link to buy Polymaker filaments in the USA:
[https://us.polymaker.com/?aff=824](https://us.polymaker.com/?aff=824)

**Additional Printing Details for the MINI Christmas Castle**
**Print Specifications:**
- Layer Height: All parts are printed at 0.2mm for detailed results.
- Filament: Recommended filament is Polymaker PLA for optimal quality.
- Slicers: Use Prusa Slicer or Bambu Lab Studio for effective slicing.

**Included Resources:**
- Instruction PDF: A detailed guide with printing suggestions and assembly steps is provided.
- Color Guide: A PDF listing the colors used in the model to help you achieve the perfect festive look.

**Support:**
If you have any questions regarding printing or assembly, don’t hesitate to reach out! I'm here to assist you. Enjoy creating your magical MINI Christmas Castle!

MINI Christmas Castle

A set of 48 terrain models for your Frost Lands adventures!
*Includes PDF 40x90cm Frost lands maps

Snow

Videos this Month

Categories

Videos

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Low Poly Snowman Magnet Puzzle (No supports, no AMS)

Christmas Castle

First Snow Baby (Foldable Snowman V2)

Gingerbread House Radio / Decor

Print-in-place Articulated STARWARS AT-AT Ver2.0

Frostlands Set (Pre-Supported)