Citrus juicer “Boaty”

**A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.**
The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes. The juicer is easy to clean, simply hold under running water.

Size:  130 x 164 x 64mm
This is the V3
Don't forget to post your makes!

**Print settings**
Required build volume: 130 x 164 x 64mm
Material usage: 60g
Print time: 6h

Material: PLA
Print direction: stls are rotated correctly, check images
Support: none
Nozzle size: 0,4 mm
Line width: 0,4 mm
Layer height 0,2 mm – 0.28mm
Outer walls: 3
Infill: 20%
Build plate adhesion type: none

Check your Filaments if they are food save to print this product. If not, there are many companies that offer cheap and certified food save filament. E.g. Extrudr, Fillamentum, Filaments.ca, Makerbot. The cheapest one I found is the Extrudr NX1 or NX2 (matt) for 23,60 € / 1000g.

Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.

If you experience any problems, please feel free to contact me on twitter or Instagram

Procedural Tile Shader

boolean part.stl

piston.stl

holder.stl

gear.stl

Coffee filter holder.3mf

Kohvifiltrihoidja.3mf

SLantwirl Vase.stl

first model using blender in 2 years...wont be posting much more this month

Taurus Magnum 1000 blender coupler replacement

Replacement of the rubber connector that transfers the motion to the knife. 

Openscad file included, to adopt it to your own use as needed.

Printed with a FLEX filament, I originally planned to glue it in place with contact cement but on first try, it seems to be tight and grippy enough to hold on on its own, for now. I cleaned the aluminum part well.

Only after modelling and printing did I cut off the original rubber and discovered the perforations in the disk, incorporating teeth in the part that grip these perforations would be a solid connection, might add that later if needed.

hairify flexi rex

I have never used blender before, but this was fun.

hairify mullet flexi rex

Nespresso Vertuo Holder.stl

This is a Nespresso vertuo pod holder that I modeled after the cardboard insert in Starbucks Venturi packs. Yes, the French bulldog logo is supposed to be there, like a little signature. This is one of the first things I designed. 

Hairify Contest Leg Lamp  

Hairy leg Lamp.stl

Hairy Toe - Hairify Blender - Remix of TOETOW by LayerOne3d

Some of the best toes in history have been hairy and this is no excpetion.

Originally designed by @LayerOne3d to cover a towing hook, I have scaled the model down and added hair using the Hairify Blender plugin.

hand blender

NESPRESSO CAPSULE HOLDER FOR 3 UNITS

Nespresso coffee pod holder 

coffee pod holder.STL

Tassimo pod holder (double sided tape or screw)

Tassimo10_screw.stl

Toaster Oven Pendant

BodyLoupe.stl

Reservoir Tab for Keurig K-Duo Coffee Maker

The wife and I have found the grip area on the reservoir lid to be so shallow that we occasionally drop it when removing and replacing, sometimes into the reservoir. This tab is just large enough to grip between thumb and first finger.

Use 5-minute epoxy to secure the tab to the grip area of the lid and allow to cure overnight before using it.


Small Kitchen Appliances

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

View 31 new models

View 13 new models

boolean part.stl

piston.stl

holder.stl

gear.stl

Coffee filter holder.3mf

SLantwirl Vase.stl

Taurus Magnum 1000 blender coupler replacement

hairify flexi rex

Nespresso Vertuo Holder.stl

Hairify Contest Leg Lamp

Hairy Toe - Hairify Blender - Remix of TOETOW by LayerOne3d

View 22 new models

View 14 new models

Nespresso coffee pod holder

View 12 new models

Toaster Oven Pendant

Reservoir Tab for Keurig K-Duo Coffee Maker

ratrod car.stl